Some Yeast Questions, generic overall - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Fermentation & Yeast > Some Yeast Questions, generic overall

Reply
 
Thread Tools
Old 03-23-2010, 08:13 PM   #1
MrMikeAZ
Recipes 
 
Mar 2010
phoenix
Posts: 23


I have been trying to use the search but the search is not too good here.

Basically, I want to know what is Yeast strain. And besides not enough yeast for the pitch, what else can cause this. And what is this exactly?

And if I did not use enough yeast on my initial pitch 48 hours ago, what would happen if I added another packet of yeast? o.g. was 1.082 and pitched only one packet of wyeast oktoberfest lager yeast for my doppelbock.

Where can I find some info about yeast dealing with what happens at diff temps, in depth life cycle info and all sorts of things? I guess I am asking for a good book or something to really increase my yeast knowledge.
__________________
Primary: None
Secondary: Amber Caramel Lager
Kegged: Winter Warmer
Next Brew: IPA

 
Reply With Quote
Old 03-23-2010, 08:21 PM   #2
permo
Recipes 
 
Sep 2009
North Dakota
Posts: 2,952
Liked 55 Times on 48 Posts


use the power of the internet to do your research. you can read all of palmers how to brew online and there is all sorts of brewing information available. I dont see a need for a book, unless of course you don't like computers.

 
Reply With Quote
Old 03-24-2010, 12:28 AM   #3
MrMikeAZ
Recipes 
 
Mar 2010
phoenix
Posts: 23

That's one problem I have. Stained yeast or Yeast strain(ed) does not bring up info about that, but different strands and straining yeast from another substance.

Is there another term I should look up? I don't understand this topic and I can't find info on it.
__________________
Primary: None
Secondary: Amber Caramel Lager
Kegged: Winter Warmer
Next Brew: IPA

 
Reply With Quote
Old 03-24-2010, 12:32 AM   #4
passedpawn
Waste Allocation Load Lifter - Earth Class
HBT_ADMIN.png
 
passedpawn's Avatar
Recipes 
 
Apr 2009
☼ Clearwater, FL ☼
Posts: 26,649
Liked 7047 Times on 4175 Posts


use google to search HBT. here's how:

put your search terms into a google search, then add "site:www.homebrewtalk.com". WITHOUT THE QUOTATION MARKS.

Click Here for an example.
__________________
- Andrew

 
Reply With Quote
Old 03-24-2010, 12:34 AM   #5
wyzazz
Recipes 
 
Aug 2009
Atwater, OH
Posts: 4,315
Liked 56 Times on 53 Posts


Stressed Yeast will net you a lot of results, for a Lager you need a LOT of yeast. I'd venture to wager that if you have a lager at 1.082 OG you'll need around 4-5 vials or smack packs of yeast, or the equivalent starter. Not to mention that a lager needs fermentation temps in the low-mid 50's, then you need to lager it in the 30's. Do you have a way to control your fermentation temps?
__________________
Quote:
Originally Posted by Revvy View Post
And I'd like to see my 1.080 beers ready from grain to glass in a week, and served to me by red-headed twin penthouse pets wearing garter belts and fishnet stockings, with Irish accents, calling me "master luv gun," but we can't always get what we want can we? :)

 
Reply With Quote
Old 03-24-2010, 12:35 AM   #6

Yes, you significantly underpitched. Do a google search for lager yeast pitch rate. Also check out www.mrmalty.com for pitching rates.

The suggestion above was to read www.howtobrew.com, a very comprehensive and helpful online book.

 
Reply With Quote
Old 03-24-2010, 12:35 AM   #7
pkeeler
Recipes 
 
Mar 2010
New Jersey
Posts: 740
Liked 4 Times on 3 Posts


Wyeast's site will have good info. Much of the info on individual strains are copied from there anyway. One thing to look up is the optimum fermentation temp. for the yeast you used.

With high gravity brews (all brews actually), aeration is more important than amount pitched (as long as you pitch a decent minimum amount). Did you aerate well? I know most sources say not to aerate (shake the fermenter) after pitching, but on big beers, I think people do aerate for up to two days. That might be something else to search for. I agree the search on the site is not great. I get much better results searching through Google's site. HomeBrewTalk threads are usually high on their results. The "Like Threads" on the bottom of the page is also helpful once you find a thread discussing your problem.

 
Reply With Quote
Old 03-24-2010, 10:09 PM   #8
MrMikeAZ
Recipes 
 
Mar 2010
phoenix
Posts: 23

I have a fridge and a temp regulator for the lager temps. That is no problem. I trusted my brew store when I showed them the recipe from the book(complete joy of home brewing, vol 3, pg 233 Doppelbock) and I mentioned starters, they said I don't need it as yeast is so fresh, and starters were more for old yeast.

I followed the books and my LHBS suggestions/instructions for my brew. I later read the forums and came across the contradictory info and that is why I am here trying to figure this stuff out to help my current brew and future brews.

Ok! I have used google to search this site to get more informed about strained yeast. It fails. I only get mention of the yeast being strained like it is in this thread, not specific info about it.

No info on what different things cause it other than not enough yeast cells for the specified o.g. I want to know things like what part of the high o.g. causes yeast to become strained. Does temp affect the straining or reduce straining? What, besides off flavors, can happen to the beer or yeast? Can yeast become "unstrained" after it is strained? Can you test for yeast strain or how would you confirm that it is strained? Can you, or should you reuse the yeast in cakes or whatever if it was strained?

<edit>
These are the kinds of questions I have that I want to find the info for. These are the things I cannot seem to find. Right now, from what the searches have turned up, its more like this myth that people just regurgitate with no science behind it. Now I am sure this is not the case, but I can't find info about this. Could someone please help me in finding this info. It is really starting to frustrate me. I am wanting to learn but the info is just not there.
</edit>
__________________
Primary: None
Secondary: Amber Caramel Lager
Kegged: Winter Warmer
Next Brew: IPA

Reason: update

 
Reply With Quote
Old 03-24-2010, 10:22 PM   #9
IceFisherChris
Recipes 
 
Mar 2009
Menomonie, WI
Posts: 476
Liked 4 Times on 4 Posts


A strain is just a way of saying "type" of yeast. It's not a process or a final result. It is what type of yeast you used. Is this what you mean? Or do you mean yeast stress? There is a difference.

 
Reply With Quote
Old 03-24-2010, 10:27 PM   #10
wyzazz
Recipes 
 
Aug 2009
Atwater, OH
Posts: 4,315
Liked 56 Times on 53 Posts


As I said in my first response "stressed yeast" will net you more search results.
__________________
Quote:
Originally Posted by Revvy View Post
And I'd like to see my 1.080 beers ready from grain to glass in a week, and served to me by red-headed twin penthouse pets wearing garter belts and fishnet stockings, with Irish accents, calling me "master luv gun," but we can't always get what we want can we? :)

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
My generic label Wallygator Label Display & Discussion 5 03-23-2009 11:40 PM
Generic Label Matt Up North Label Display & Discussion 13 01-14-2009 01:34 PM
Generic yeast to use for stuck fermentation Pivzavod Beginners Beer Brewing Forum 3 10-26-2008 02:32 PM
My generic label phooka Label Display & Discussion 3 07-31-2007 02:50 PM


Forum Jump