Home Brew Forums > Home Brewing Beer > Extract Brewing > English Mild - OG lower than expected
Reply
 
Thread Tools
Old 03-21-2010, 02:27 AM   #1
KAMMEE
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2010
Location: Peoria, Illinois
Posts: 388
Liked 4 Times on 4 Posts
Likes Given: 2

Default English Mild - OG lower than expected

I crafted an English Mild that I call The Mild Mannered Gingerman, because I add 4 oz of ginger to the last 10 minutes of the boil. Here's the recipe:

0.75 LB Crystal Malt 60L
0.25 LB Chocolate malt
0.125 LB Black Patent Malt

Steep at 155 for 30 minutes

3 LB of Light DME

1 oz Kent Goldings for 60 Min

4 oz Freshly grated ginger root during final 10 minutes of boil

Nottingham Yeast

I originally calculated this with a 2.5 Gallon boil volume and then topped it off to make 5 gallons. The calc's showed 1.027 OG but I got 1.020 @ 68 degrees F. I'm guessing this mild will be uber-mild because even if it hits 1.000 FG It'll only hit 2.65% alcohol. I'm thinking I should add another lb of DME boiled in a quart or two of water and add that when transferring to a secondary to up the alcohol volume. Does anyone see a problem with doing that? I could open up the fermenter and add that in tomorrow, but it will probably be going great guns by then and I'd rather not mess with the primary while its in its initial stages. Thoughts or recomendations?


KAMMEE is offline
 
Reply With Quote
Old 03-21-2010, 01:19 PM   #2
KAMMEE
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2010
Location: Peoria, Illinois
Posts: 388
Liked 4 Times on 4 Posts
Likes Given: 2

Default

I wonder if adding the DME at the beginning of the boil caused the gravity to be lower... that doesn't make sense but right now I'm just trying to figure out why it would be low. Since Nottingham tends to be a quick fermenter I think I'll throw an extra lb of DME in today. I'm going to boil the DME for about 15 minutes, cool, then quickly add it to the fermenter... I'll keep my fingers crossed that this works.


KAMMEE is offline
 
Reply With Quote
Old 03-21-2010, 01:41 PM   #3
bradjoiner
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: woodlands texas
Posts: 242
Liked 14 Times on 13 Posts
Likes Given: 2

Default

if you are gonna add extract do it during primary fermentation if you can
bradjoiner is offline
 
Reply With Quote
Old 03-21-2010, 01:52 PM   #4
beerbuddy
Feedback Score: 0 reviews
 
beerbuddy's Avatar
Recipes 
 
Join Date: Sep 2007
Location: Milford, MA
Posts: 185
Default

I calculate this at 1.022. Remember you are not getting any fermentables from the grain if you are just steeping. +1 on adding DME in primary
__________________
-----------------------------------------
The wise does at once what the fool does at last
beerbuddy is offline
 
Reply With Quote
Old 03-21-2010, 02:11 PM   #5
KAMMEE
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2010
Location: Peoria, Illinois
Posts: 388
Liked 4 Times on 4 Posts
Likes Given: 2

Default

I think adding during the primary is a better idea. I hadn't thought about not getting any fermentables from my grains, although they're all modified and I thought a 30 minute soak at 155 would provide some sugars but if its calculated at 1.022 on just the 3LB of DME I feel much better about my initial gravity reading.
KAMMEE is offline
 
Reply With Quote
Old 03-21-2010, 05:34 PM   #6
KAMMEE
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2010
Location: Peoria, Illinois
Posts: 388
Liked 4 Times on 4 Posts
Likes Given: 2

Default

I added 1 lb of DME boiled in 4 cups water just now. I had the lid on the fermenter open for 2.4 seconds... not bad if I say so. Within 20 seconds the airlock was bubbling again, so I'm happy.
KAMMEE is offline
 
Reply With Quote
Old 03-22-2010, 06:04 PM   #7
coffeegod
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2009
Location: Virginia Beach, Va.
Posts: 88
Liked 1 Times on 1 Posts

Default

+1 on DME in the secondary, maybe more to get it up to style guidelines. According to qbrew you need a minimum of 1.25 lbs to get the etoh up to 3.2%

coffeegod is offline
 
Reply With Quote
Old 03-22-2010, 06:26 PM   #8
starrfish
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2008
Location: Florence, SC
Posts: 2,031
Liked 29 Times on 24 Posts
Likes Given: 25

Default

Wondering if you got a diluted sample from adding that much water to get to final 5 gal volume (water and boiled wort not completely mixed). Did you shake fermenter well before pulling sample? Even at 2.65% your with-in spec for style of 2.5% abv to 4%.

Even with the addition of extra pound it should bring you up to around 3.6% (still within style)
__________________
Yankee Sand Flea on a Southern Beach.

“Son, you are a walking violation of the laws of nature, but you’re lucky, we don't enforce them laws.”

starrfish is offline
 
Reply With Quote
Old 03-22-2010, 06:29 PM   #9
mb2696
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2009
Location: charlottesville, va
Posts: 438
Liked 4 Times on 4 Posts
Likes Given: 3

Default

Quote:
Originally Posted by kammee View Post
I think adding during the primary is a better idea. I hadn't thought about not getting any fermentables from my grains, although they're all modified and I thought a 30 minute soak at 155 would provide some sugars but if its calculated at 1.022 on just the 3LB of DME I feel much better about my initial gravity reading.
make sure you understand the difference between gravity points and fermentables. you DO get gravity points from your steeping grains...they just may not be fermentable. steeping grains are already converted and don't have to be mashed to extract the sugar.

if this is a 5 gal batch you should have got around 1.030 OG. like starfish said, maybe you got a diluted sample. if you do add dme, i would add it asap to the primary

you could also take a sample right now. if your fermentation has started and you gravity is reading at or about 1.020, you know your initial sample was wrong...

mb2696 is offline
 
Reply With Quote
Old 03-22-2010, 06:34 PM   #10
KAMMEE
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2010
Location: Peoria, Illinois
Posts: 388
Liked 4 Times on 4 Posts
Likes Given: 2

Default

I did add DME yesterday during the primary, about 18 hours after I sealed the fermenter the first time. I guess it could have been a diluted sample, but I doubt it. I did give it a good stir in order to airate the wort. I didn't bother taking a gravity reading I'm just going to wait and see how it turns out. Won't know the final ABV, but I'm sure it will taste good none the less. Lesson learned, must calculate the extract amounts better next time using something like promash.


KAMMEE is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
lower than expected SG scottie Beginners Beer Brewing Forum 3 02-27-2010 04:00 AM
Mild Autumn Night-english mild... BREWING NOW! Orangevango Recipes/Ingredients 6 10-08-2009 12:34 AM
FG of 1st all grain lower than expected. alee All Grain & Partial Mash Brewing 5 04-07-2009 12:15 AM
My porter looks like it will be lower SRM than expected Denny's Evil Concoctions All Grain & Partial Mash Brewing 10 03-18-2008 09:02 PM
Lower then expected FG Rhoobarb All Grain & Partial Mash Brewing 5 08-05-2005 01:17 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS