Power Distribution block? - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Power Distribution block?

Thread Tools
Old 03-20-2010, 01:21 AM   #1
Aug 2008
Posts: 252
Liked 4 Times on 3 Posts

I have a 50A power supply that I am running my electric brewery on. I need to split that power into several lines: pump, PID, SSR (and heating elements).

I'm having trouble finding what I need to split that line to run the various items from the same breaker. Any advice? I live in Canada, so eBay is often the best supplier for oddball items like this. Thanks.


Reply With Quote
Old 03-20-2010, 01:43 AM   #2
Dec 2006
Posts: 473
Liked 20 Times on 16 Posts

I bought some on eBay, and by the time I designed my wiring, I found I didn't need them because I am running two separate 240 circuits into the control box. Each one comes in and is connecting to its own 2 pole on-off switch, and from there through the DDR to the heater element, one for HLT, one for BK.

I will run a 120 line off one pole of one of the switches to feed my 120 V items. This will be distributed with contact strips since they are all low amp devices.

You are welcome to the distribution blocks I have, I paid about $25 USD for them with shipping. I'll sell them for $25 plus shipping from MN to AB.

PM me if interested and I will send a better discription and maybe photos if I can figure out how...

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
DIN rail power distribution: a how-to guide paledragon Brew Stands 22 03-30-2013 02:40 PM
Power Distribution Blocks skarude Brew Stands 18 06-01-2010 12:45 AM
Control Panel Power Distribution illin8 Brew Stands 19 03-03-2010 09:54 PM
control panel power distribution paledragon Brew Stands 2 02-06-2010 09:14 PM

Forum Jump