40-60-70 - Home Brew Forums
Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > 40-60-70
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 03-15-2010, 02:33 PM   #1
ivanfigs
Recipes 
 
Jan 2010
The Poconos
Posts: 9


Does anyone know the proper water to grain ratio for each of the steps in Fix's 40-60-70. My mash tun's not huge, and it seems like the ratios that work, to achieve the temps I need, are a little bit light on water (.5 qt/lb for 40, 1 qt/lb for 60, and 1.5 qt/lb for 70). Do these number seem right?



 
Reply With Quote
Old 03-15-2010, 03:22 PM   #2
menschmaschine
Recipes 
 
Jun 2007
Delaware
Posts: 3,272
Liked 38 Times on 30 Posts


The 0.5 is a little thick, but may work... I've never mashed that thick so I don't know. Can you fit up to 2.0 qts./lb.? If so, you could do (give or take) 1.0, 1.5. and 2.0 qts./lb. At any rate, I'd max out what your tun can hold (up to 2.0 + qts./lb.) and work your way down.
__________________
END TRANSMISSION

 
Reply With Quote
Reply
Thread Tools



Forum Jump