Brass Beer Tower - 6 Head - Home Brew Forums
Home Brew Forums > Home Brew Market > For Sale > Brass Beer Tower - 6 Head

Reply
 
Thread Tools
Old 03-10-2010, 10:28 PM   #1
BlackBox
Recipes 
 
Sep 2009
Kansas
Posts: 5
iTrader: (0)


I have for sale an all brass 6 head beer tower. It is used but has been very well cared for. All 6 valves are brass and are in working order. It is currently set up for glycol but could be used as an air-cooled unit when attached to a "keezer". The chill blocks are cast aluminum and are slotted to allow for the chiller tube to pass through. The column diameter is 3" I believe. Plenty of room to get 6 beer lines up to the taps.

Pics Here: http://wichita.craigslist.org/for/1638085944.html

(The top has been removed in one of the pics to show the inside.)

I have poured many beers on this tower over the years. The brass is in great shape after a quick polish for the pictures. Some patina is still present but adds character IMO. It could be completely buffed out to original finish if someone wanted to expend the elbow grease to do so.

I am selling this tower because I am in the process of building a direct fired mash brew system and decided to part ways with this piece to help foot the bill. I was holding on to the tower so I could install it in my new home. Plans have changed on the home bar. (Changed plans = children)

I would much rather sell this tower to a fellow homebrewer than anyone else. A brand new all brass tower with this many heads is expensive to say the least ($700 new at kegworks.com). I am looking to get a fair price but keeping it within reason.

Please, serious inqueries only. PM me or email [email protected].

I will entertain reasonable offers.

Located in Kansas.




 
Reply With Quote
Old 03-10-2010, 10:32 PM   #2
GilaMinumBeer
HBT_LIFETIMESUPPORTER.png
 
GilaMinumBeer's Avatar
Recipes 
 
Jan 2008
Posts: 58,129
iTrader: (0)
Liked 7312 Times on 6024 Posts


I'll give you the dollar you have it listed for on Craigslist.

You pay shipping.



 
Reply With Quote
Old 03-16-2010, 02:31 PM   #3
BlackBox
Recipes 
 
Sep 2009
Kansas
Posts: 5
iTrader: (0)

Bump.

No offers yet. Hard to believe no one is interested.

 
Reply With Quote
Old 03-16-2010, 03:33 PM   #4
PTisch
Recipes 
 
Oct 2009
Clinton Twp., MI
Posts: 141
iTrader: (0)
Liked 1 Times on 1 Posts


I am definitely interested. The problem is that I only have $100 that I can offer you.

 
Reply With Quote
Old 03-21-2010, 01:55 PM   #5
mh-brews
Recipes 
 
Mar 2010
wichita, kansas
Posts: 135
iTrader: (0)
Liked 10 Times on 4 Posts


i have horrible luck ! i wanted one of these but built a coffin box due to cost (this was in the last 2 weeks!) what you might do (if your in Wichita) there is a brew store on Douglas called "Whats Brewing" take some pics and the owner will let you put them up.

Good Luck!

 
Reply With Quote
Old 03-26-2010, 05:13 PM   #6
BlackBox
Recipes 
 
Sep 2009
Kansas
Posts: 5
iTrader: (0)

One last bump. Going to list on eBay I guess.

 
Reply With Quote
Old 03-26-2010, 11:49 PM   #7
ubermick
Recipes 
 
Jul 2009
San Rafael, California
Posts: 1,008
iTrader: (0)
Liked 32 Times on 30 Posts


If this were stainless, I'd be all over it.

Correction: if this were stainless and half the price, I'd be all over it!



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
3 tap brass tower for sale bighandsray For Sale 6 04-30-2010 02:50 PM
Chrome plated brass shanks from a perlick tower, ok? mymbtheduke Bottling/Kegging 1 01-31-2010 01:52 AM
Draft Beer Tower, 10 spigots, new, Brass (CT area) UnaBonger For Sale 2 10-27-2009 07:35 PM
FS: Triple Brass Tower (4") CharlosCarlies For Sale 0 08-05-2009 06:33 PM
Restoring brass tower tek210 Bottling/Kegging 4 03-07-2009 05:56 PM


Forum Jump