CO2 Regulator Leak - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > CO2 Regulator Leak

Reply
 
Thread Tools
Old 03-08-2010, 06:38 PM   #1
ebeer
Recipes 
 
May 2007
Concord, CA
Posts: 197
Liked 2 Times on 2 Posts



I've got a dual body regulator from Draught Technologies. On the second regulator, there is air coming out of the little hole on the body (or cover). I've taken the cover off, reseated the gasket and put back together. Unfortunately, no luck - still leaks through the hole.

Do I just need to replace the gasket, or is there a bigger issue here?
__________________
My homebrew site

 
Reply With Quote
Old 03-08-2010, 07:41 PM   #2
kmack747
 
kmack747's Avatar
Recipes 
 
Jan 2010
Bad Axe, Michigan
Posts: 154

It is more than likely a defective diaphragm. Yes you should be able to replace the diaphragm.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
CO2 regulator leak or ? samc Equipment/Sanitation 4 11-15-2010 04:55 PM
CO2 dual primary regulator leak ckollias Bottling/Kegging 5 02-19-2010 06:33 PM
CO2 leak from new regulator rhltechie Equipment/Sanitation 7 08-31-2009 11:29 PM
Regulator Leak? gpogo Bottling/Kegging 1 08-30-2008 01:48 PM
Help! Gas Leak between Tank and Regulator efreem01 Bottling/Kegging 15 08-17-2007 02:30 AM


Forum Jump