running tubbing to a draft tower - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > running tubbing to a draft tower

Reply
 
Thread Tools
Old 03-05-2010, 05:39 PM   #1
monk420
Recipes 
 
Feb 2010
the lanc. pa
Posts: 111


I need to run 20' of line from my basment up to my bar to wear the draft tower is. I'm using a double-faucet tower at my bar. from there i want to run the lines into the basment then over 15' to were the fridg is. Is there a problem with doing this. I was going to wrap the tubing in foam insulation like a noodle for a pool but made for plumbing pipes to help keep them cool. I don't want to start this project and have a bunch of problems thanks

 
Reply With Quote
Old 03-05-2010, 06:18 PM   #2
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,240
Liked 1690 Times on 1087 Posts


It's a challenging project for sure. You'll want to use thinwall 1/4" ID polyethylene tubing for the beer and run some 1/4" OD copper lines as a coolant loop. That whole bundle will have to be well insulated as you've mentioned. You'd want to run a pump inside a keg full of water to feed the copper line up to the tower and back. There are a few folks who have tackled similar projects here but I don't know of any that have done 20-25 feet of run. It may turn out that coolant at beer temp isn't cold enough.
__________________
Welcome to BrewHardware.com. I love you.
Corny Keg Dry Hop Canisters $26.50 for limited time
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 03-05-2010, 06:35 PM   #3
monk420
Recipes 
 
Feb 2010
the lanc. pa
Posts: 111

i could move my fridge in the b-ment and cut it down to about a 10' run straight up

 
Reply With Quote
Old 03-07-2010, 03:23 AM   #4
AmmoHouse
 
AmmoHouse's Avatar
Recipes 
 
Sep 2009
South Dakota
Posts: 28

It has to be possible.
I was at a Hotel in Baltimore and their kegs are approx. 30yds away in a cooler and the lines run in a insulated tube to the bar...yes I saw it with my own eyes.
I'm a noob at kegging but to me that was very impressive.
__________________
USAF AMMO

 
Reply With Quote
Old 03-07-2010, 02:27 PM   #5
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,240
Liked 1690 Times on 1087 Posts


Of course it's possible. Tons of bars do this. It's just a matter of running glycol lines down the trunk to keep everything cool or dumping the first 12 oz of beer before the first pour every day.

In a short, straight run, folks have had success running the lines through an air duct fed by a fan in the kegerator. If it had to make a lot of turns, it's probably best to go with liquid cooling fed by a pond pump.
__________________
Welcome to BrewHardware.com. I love you.
Corny Keg Dry Hop Canisters $26.50 for limited time
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
running tubing for a draft tower monk420 Beginners Beer Brewing Forum 4 03-05-2010 06:35 PM
WTB: Two tap draft tower CoalCracker For Sale 3 10-28-2009 06:12 PM
diy draft tower kjones Equipment/Sanitation 4 06-19-2009 07:45 PM
Draft Tower Fan Running Time Britski Bottling/Kegging 3 03-21-2008 04:49 PM
Draft Tower Help AGBrewer Equipment/Sanitation 14 03-07-2007 10:08 PM


Forum Jump