ph levels - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > ph levels

Thread Tools
Old 02-27-2010, 04:39 PM   #1
Feb 2010
Posts: 7

I have been brewing for a year now and have started the transition into all grain and im a little worried about the ph levels in my water. I have well water that is treated with a water softening system. I bypass the softener with a direct water supply from my well pump to my HLT. I do not have a neutralize and this is my issue. I have tested my water and below are the resualts:

Chlorine = 0
PH = 4
Alkalinity = 80
Hardness = 0 (water softener)

Im starting to find a acidic taste to the beers. I have some gypsum i bought originally before i bypassed the softener. I read in how to brew by john palmer that it could help. But that chapter confused the hell out of me (im no rocket scientist i just love beer). I'm brewing tomorrow and plan to check the ph level of the mash im shooting for 5.1-5.5.

Thanks for any insight you guys might have, stay thirsty my friends.

Danny B

Reply With Quote
Old 02-27-2010, 04:47 PM   #2
ArcaneXor's Avatar
Nov 2007
Posts: 4,572
Liked 118 Times on 105 Posts

Some 5.2 Mash Stabilizer will take care of your pH problems for you. It's widely available at homebrew shops throughout the U.S.

Reply With Quote
Old 02-27-2010, 04:56 PM   #3
Laughing_Gnome_Invisible's Avatar
Jan 2008
Posts: 12,250
Liked 697 Times on 513 Posts

Brewing tomorrow you probably don't have time to get 5.2 buffer. Take a look at this thread. With a little research and these free tools you may well be able to get your water close to what you need given the water information you already with household items (Plus your gypsum) in time for your brew.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Carbonation levels too low, not enough psi? reif.erik Bottling/Kegging 4 05-15-2008 10:49 PM
Brewing levels NYeric Beginners Beer Brewing Forum 6 04-11-2007 10:47 PM
Carbonation Levels Brew_Meister Bottling/Kegging 5 02-16-2006 08:03 PM
Co2 levels oxford brewer General Beer Discussion 8 02-16-2006 03:17 AM
Filling Levels oxford brewer Bottling/Kegging 4 01-29-2006 08:45 PM

Forum Jump