New brewer, first batch! Question..... - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > New brewer, first batch! Question.....

Reply
 
Thread Tools
Old 02-26-2010, 12:13 AM   #1
danapellerin
Recipes 
 
Feb 2010
Fresno, CA
Posts: 3



Alright folks, I decided to take the plunge and get into the home brewing hobby. I decided to start simple so I bought a Munton's IPA Bitter extract kit, followed the directions, and today cracked the first one open and gave it a taste.

I think it came out alright.... it's the right color, the carbonation is good, at actually smells and tastes like beer! But it's not quite as strong as I expected an IPA to be. It tastes a little watery to me.

So my question.... is that indicative of these extract kits? Did I possibly do something wrong, or is that the best I can expect without moving up to a partial mash kit?

Thanks!

Dana

 
Reply With Quote
Old 02-26-2010, 12:19 AM   #2
LVBen
Recipes 
 
Jan 2010
Las Vegas, NV
Posts: 1,343
Liked 21 Times on 21 Posts


Quote:
Originally Posted by danapellerin View Post
Alright folks, I decided to take the plunge and get into the home brewing hobby. I decided to start simple so I bought a Munton's IPA Bitter extract kit, followed the directions, and today cracked the first one open and gave it a taste.

I think it came out alright.... it's the right color, the carbonation is good, at actually smells and tastes like beer! But it's not quite as strong as I expected an IPA to be. It tastes a little watery to me.

So my question.... is that indicative of these extract kits? Did I possibly do something wrong, or is that the best I can expect without moving up to a partial mash kit?

Thanks!

Dana
That is a hopped liquid extract, correct? The hops will mellow over time in the can. So, an older can will have a mellower taste. Next time, I'd recommend a kit with pellet hops.

 
Reply With Quote
Old 02-26-2010, 12:29 AM   #3
llazy_llama
Recipes 
 
Jan 2009
Rapid City, South Dakota
Posts: 2,839
Liked 90 Times on 28 Posts


I'd say that's somewhat to be expected from a Munton's kit. If you're not ready to do a partial mash (or all grain, for that matter) I'd say try a better quality extract kit or recipe. There are plenty of great extract recipes on this site, and all the reputable online homebrew stofes (AHS, Midwest, BMW, Morebeer, etc...) have a great selection of kits that don't use prehopped extract. Give one of those a shot, and see if your results don't improve.
__________________
Quote:
Originally Posted by Catt22 View Post
I would never use a dead mouse in my beer. It's much better to use live ones. You could probably just steep a dead one, but live ones must be mashed. Actually, smashed and mashed would be best.

 
Reply With Quote
Old 02-26-2010, 12:31 AM   #4
lostnfoam
 
lostnfoam's Avatar
Recipes 
 
Nov 2006
Posts: 145

yeah using a kit that has pellets and some specialty malt can yield better results. the more quality your ingredient the better your beer will taste. you also have to account for sanitary conditions and patients. but hey congrats on your first beer.
__________________
Primary:

Secondary:

Bottled: English pale ale (first AG), cream ale, phat trye, oatmeal stout, imperial pumkin, imperial Ipa, kreik, calowiezen, winter warmer, st john IPA, pumkin ale, pumkin porter, imperial stout, belgain pale ale

Next to brew: coffee brown ale, witenger, belgain pale ale

 
Reply With Quote
Old 02-26-2010, 12:32 AM   #5
ChshreCat
Recipes 
 
Aug 2008
Camano Island, Washington
Posts: 11,538
Liked 539 Times on 431 Posts


+1 on the LLguy. Find a kit that includes hops and possibly some steeping grains and you'll probably enjoy the end product a bit more. Plus, emptying a can of pre-hopped extract into boiling water isn't teaching you too much about brewing, at least the pre-fermenter side of things. And don't be afraid of partial mash. It's pretty easy if you start with smaller amounts of grain.
__________________
"Science + beer = good!"
-Adam Savage

 
Reply With Quote
Old 02-26-2010, 12:49 AM   #6
danapellerin
Recipes 
 
Feb 2010
Fresno, CA
Posts: 3


Hey thanks for all the feedback. I guess I should stoked that it's drinkable at least! And hearing your comments on the Munton's gives me encouragement to keep going and try something else next time. Can't wait to start my next batch.

Cheers!

Dana

 
Reply With Quote
Old 02-26-2010, 12:55 AM   #7
whoneedsabeer
Recipes 
 
Dec 2009
Wilmington, DE
Posts: 186

How long has it been aged? Let it sit for another week or two and see if the tastes come together a bit more. I find that when my beer is young, it has a "thin" watery flavor as well, but that goes away over time.

Glad your beer came out drinkable!

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
New Brewer first batch Tbaz Beginners Beer Brewing Forum 2 01-13-2010 05:55 AM
New brewer with an issue on 2nd batch, Help! Tilldeath Beginners Beer Brewing Forum 7 10-14-2009 05:13 AM
New Brewer a couple questions about first batch BrewBalls Beginners Beer Brewing Forum 14 08-04-2009 04:30 AM
new AG brewer - ordering stuff for batch #4 leoglenwood All Grain & Partial Mash Brewing 6 03-10-2009 12:02 AM
1st Batch questions from new brewer dirtymartini Beginners Beer Brewing Forum 16 01-01-2007 07:23 PM


Forum Jump