ebay aquarium temp controller build - Page 219 - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Fermenters > ebay aquarium temp controller build

Reply
 
Thread Tools
Old 12-09-2011, 08:03 PM   #2181
cwi
Registered User
Recipes 
 
Jun 2010
Austin
Posts: 845
Liked 34 Times on 28 Posts


Quote:
Originally Posted by zonabb View Post
Submerging it in the wort is out of the question IMO.
Not sure what your reasoning is for ruling out a thermowell, but it is a correct assumption that it is not the best method. The effect of ambient air influencing the probe slightly through the insulation provides some overshoot compensation and reduction in radial stratification. The results from some tests regarding this were posted in this thread, or maybe it was a different one, but definitely on HBT. To use a thermowell in the fermenter, placing it close to the wall provided the best temp control. The effect is most pronounced post-active ferm when there are no thermal currents from the active yeast.

Don't fear over-insulating it. I have found it takes much more insulation than I thought, even after taping the crap out of it to make it airtight, to prevent the ambient from influencing the probe. Also, as was born out by the testing, that is a good thing.

FYI, thermowells are perfectly safe, as long as they are constructed and mounted properly. They can be used as a secondary measurement point for verification/logging/sanity check.

 
Reply With Quote
Old 12-09-2011, 09:02 PM   #2182
Brewnoob1
Recipes 
 
Sep 2011
Puyallup, WA
Posts: 982
Liked 24 Times on 24 Posts


Quote:
Originally Posted by jar1087 View Post
I bought one of these about 100 pages ago and just love it. I just ordered another one for a second fermentation fridge build. Found this one from a U.S. seller for $19.88 shipped, so I thought that I would share.

eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices
The link takes you to a controller that is listed at $199.88. Don't buy that one! lol
__________________
Keg #1: Empty :(
Keg #2: Empty :(
Kegs 3-5: Empty :(

Ferment #1: Empty :(
Ferment #2: Empty :(
Ferment #3: Empty :(

On Deck: Something....Anything!!!

 
Reply With Quote
Old 12-09-2011, 09:10 PM   #2183
jar1087
Recipes 
 
Feb 2009
Pennsylvania
Posts: 131
Liked 2 Times on 2 Posts


Quote:
Originally Posted by Brewnoob1 View Post
The link takes you to a controller that is listed at $199.88. Don't buy that one! lol
Yeah, I don't know what that seller is doing. It was definitely only $19.88 when I first ordered it, as confirmed by eBay, Paypal, and my credit card. Maybe it's just a typo and will be corrected?

 
Reply With Quote
Old 12-10-2011, 04:20 AM   #2184
emjay
Recipes 
 
Jan 2011
Toronto, Ontario
Posts: 12,794
Liked 1719 Times on 1606 Posts


Quote:
Originally Posted by jar1087

Yeah, I don't know what that seller is doing. It was definitely only $19.88 when I first ordered it, as confirmed by eBay, Paypal, and my credit card. Maybe it's just a typo and will be corrected?
That's what I think.

Either that, or he/she saw the link on the link on this site (or elsewhere, or maybe "just because") and is hoping to take advantage of people placing orders without paying too much attention. Don't know what the wholesale cost on those units are, but making an additional hundred bucks could very well be like selling 20+ extra units at regular price.

And if the seller has a similar listing with a more reasonable price, there's virtually no downside to attempting something like that, since they won't lose many (if any) sales to people who would pass on that price.

 
Reply With Quote
Old 12-11-2011, 08:44 PM   #2185
Wild Duk
Recipes 
 
Mar 2008
Posts: 317

I've been using a brew belt on mine with no problems... Bucket and Carboy. Since this is a new build I've been monitoring what the controller says and what the actual wort temp is and it's been spot on. I just taped the probe to the side with bubble wrap on top then a cut in half koozie taped on top of the bubble wrap....

 
Reply With Quote
Old 12-12-2011, 04:08 AM   #2186
ahurd110
Recipes 
 
Jul 2011
Marietta, GA
Posts: 98
Liked 4 Times on 3 Posts


Got mine wired up today, but I'm having a problem. Maybe this has been discussed before, I tried to get through the whole thread but couldn't find it. My problem is that the hot and cold outlets don't seem to be working independently- regardless of weather it is trying to heat or cool power seems to be going to both. On the OP I saw the note "very important to break off the jumper tab on the hot side so you can control each outlet independently," but I'm not too experience with electric work and am unsure what exactly this means. Any help would be appreciated!

 
Reply With Quote
Old 12-12-2011, 04:23 AM   #2187
Tinga
Recipes 
 
May 2010
MN
Posts: 1,123
Liked 39 Times on 30 Posts


Quote:
Originally Posted by ahurd110 View Post
Got mine wired up today, but I'm having a problem. Maybe this has been discussed before, I tried to get through the whole thread but couldn't find it. My problem is that the hot and cold outlets don't seem to be working independently- regardless of weather it is trying to heat or cool power seems to be going to both. On the OP I saw the note "very important to break off the jumper tab on the hot side so you can control each outlet independently," but I'm not too experience with electric work and am unsure what exactly this means. Any help would be appreciated!
did you break the jumper tab on the left side of the outlet?

 
Reply With Quote
Old 12-12-2011, 06:48 AM   #2188
JuanMoore
Recipes 
 
Oct 2009
The Old Pueblo
Posts: 21,876
Liked 3678 Times on 3500 Posts


Quote:
Originally Posted by ahurd110 View Post
Got mine wired up today, but I'm having a problem. Maybe this has been discussed before, I tried to get through the whole thread but couldn't find it. My problem is that the hot and cold outlets don't seem to be working independently- regardless of weather it is trying to heat or cool power seems to be going to both. On the OP I saw the note "very important to break off the jumper tab on the hot side so you can control each outlet independently," but I'm not too experience with electric work and am unsure what exactly this means. Any help would be appreciated!
It is a metal tab connecting the top outlet post (where the screws are that hold the wires) to the bottom outlet post. It should be fairly obvious. See the pics in posts 1322 and 1323 of this thread for reference-

http://www.homebrewtalk.com/f51/ebay...ml#post2875981

 
Reply With Quote
Old 12-12-2011, 02:15 PM   #2189
Misplaced_Canuck
HBT_LIFETIMESUPPORTER.png
 
Misplaced_Canuck's Avatar
Recipes 
 
Jan 2011
NE Columbia SC - Formerly, Montreal Canada
Posts: 2,884
Liked 166 Times on 134 Posts


Also 3rd picture in this: http://www.homebrewtalk.com/f51/ebay...6/#post3152417

M_C
__________________
Quote:
Originally Posted by Misplaced_Canuck
Carbonic bite? Is that like the bubonic plague?
Quote:
Originally Posted by ebstauffer
Needless to say after more than a few drams my mental efficiency matched my mashing efficiency.

 
Reply With Quote
Old 12-12-2011, 10:33 PM   #2190
ahurd110
Recipes 
 
Jul 2011
Marietta, GA
Posts: 98
Liked 4 Times on 3 Posts


Got it.
Thanks guys.

This thing is great, I have an IPA fermenting out with Pacman right now at a happy 63deg.

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
DIY temp controller build android DIY Projects 100 05-09-2013 01:14 PM
Control Fermentation temp with Aquarium Heater chemist308 General Techniques 20 12-15-2012 12:13 AM
question about "aquarium temperature controller" SamBrewer General Techniques 12 02-26-2011 07:30 PM
Attic Fan Temp Controller = Inexpensive Fermentation Controller???? Beernip General Techniques 5 06-16-2009 04:30 PM
Brutus Build Controller Box? gruversm Brew Stands 9 03-27-2009 03:54 AM


Forum Jump