Keggles - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns & Hot Liquor Tanks > Keggles

Reply
 
Thread Tools
Old 11-11-2006, 12:50 AM   #1
BBboomer
Recipes 
 
Oct 2006
Okie City
Posts: 34


I finally got to the right place at the right time. I have been checking a local scrap yard every few days for the past several weeks. The fella there told me he gets kegs from time to time but a company from Texas had just bought all his when I went there the first time.
I bought three nice kegs to convert today. He had probably 10 or so and most were in pretty fair condition, two still had a fair amount of beer in them.
Anyway now to my question. I am going to build a boil pot, mash tun and HLT.
The drain outlets are no problem but what of the rest of the couplers? Any suggestions/experiences with where to locate them, how high, 90 degrress apart etc?
Thanks, Darrell

 
Reply With Quote
Old 06-12-2013, 04:39 PM   #2
RoxtonBrewing
 
RoxtonBrewing's Avatar
Recipes 
 
Feb 2011
Owensboro, KY
Posts: 61
Liked 4 Times on 2 Posts


Just start looking around in the DIY section.
There are plenty to choose from.

You can also check my build thread below.

Good luck and post progress. Always love to see others and get new ideas.
__________________
Follow my build @ http://www.homebrewtalk.com/f51/roxt...-build-228403/

 
Reply With Quote
Old 06-13-2013, 05:26 AM   #3
Mtn_Brewer
Recipes 
 
Oct 2012
Posts: 171
Liked 39 Times on 26 Posts


These are good resource pages from brewhardware.com:

http://www.brewhardware.com/kegtokettle

http://www.brewhardware.com/modify-a-pot

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Keggles lyacovett General Chit Chat 3 11-01-2009 04:00 AM
how i cut my keggles monty73741 Kettles, Mash Tuns & Hot Liquor Tanks 18 06-02-2009 08:16 PM
ka-ka-ka-keggles android Home Brewing Photo Forum 13 03-30-2009 09:36 PM
Keggles Anthony_Lopez Equipment/Sanitation 23 11-26-2008 09:58 PM


Forum Jump