Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators and Keezers > Keezer build question
Reply
 
Thread Tools
Old 02-10-2010, 06:25 PM   #1
sean6247
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: Galt, California
Posts: 76
Default Keezer build question

Hi All,

I recently purcahsed my freezer, faucets, other items to build my keezer. My question to all of you that have completed this type of project is: What kind of wood did you use for the collar? I see most of the collars are 2x6 - 2x8. I have not been able to find Oak or any other finish type wood in those denominations. I want to get the material at Home Depot if at all possible.

A second question, did you have to prep the wood before applying stain, or were you able to apply the stain with only sanding the wood?

Thanks in advance....


sean6247 is offline
 
Reply With Quote
Old 02-10-2010, 06:35 PM   #2
whoneedsabeer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2009
Location: Wilmington, DE
Posts: 196
Default

I don't think you're going to find oak in 2x6 or 2x8 at HD or Lowes. Check local lumber yards, but it'll be expensive.

Why not just use pine? Especially if you're going to stain it anyway.

All you need to do is sand the wood before staining. After staining, the cells of the wood will swell some, and make the wood feel rough. Use stainless steel wool pads to smooth the wood between coats to keep the wood feeling smooth. You can use 200-400 grit sandpaper too, but that clogs too easily IMHO.

Good luck!


whoneedsabeer is offline
 
Reply With Quote
Old 02-10-2010, 06:41 PM   #3
sean6247
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: Galt, California
Posts: 76
Default

Yeah, I know it will be expensive. That is why I am trying to find out what others have done. I am not big on reinventing wheels. There are several very good looking keezers on this board.

I have considered Doug Fir with a 1/4" oak veneer, Redwood, 1x6 oak. I am totally up in the air on the type of wood.
sean6247 is offline
 
Reply With Quote
Old 02-10-2010, 06:44 PM   #4
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 4 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,752
Liked 1301 Times on 855 Posts
Likes Given: 35

Default

Why do you need such a tall collar? I used 1 x 3 poplar. If you want to stain, use something like 1 x 4 oak. Frankly, unless you plan on staining to match some existing wood, I'd just paint it white to match the rest of the cabinet.
__________________
Welcome to BrewHardware.com. I love you.
New 100% Stainless Steel Heating Elements are IN! ULWD 5500w Ripple, 2000w, 1500w, etc
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.
Bobby_M is offline
 
Reply With Quote
Old 02-10-2010, 06:56 PM   #5
sean6247
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: Galt, California
Posts: 76
Default

I wnat to be able to put some kegs on the hump. So that will decide how tall I make the collar. I also want to match the wood to the pool table and other wood shelves that I have in my game room.
sean6247 is offline
 
Reply With Quote
Old 02-10-2010, 07:23 PM   #6
BrewinJay
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2009
Location: Ohio
Posts: 93
Default

I used 2x10 on mine, I also wanted to be able to put kegs on the hump. I built a case around my keezer so to make it look nice I used a 1x12 to put around the collar and stained it all.
BrewinJay is offline
 
Reply With Quote
Old 02-10-2010, 08:29 PM   #7
Quaffer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Location: Snohomish, WA
Posts: 488
Liked 28 Times on 15 Posts
Likes Given: 1

Default

Quote:
Originally Posted by sean6247 View Post
What kind of wood did you use for the collar? I see most of the collars are 2x6 - 2x8. I have not been able to find Oak or any other finish type wood in those denominations. I want to get the material at Home Depot if at all possible.

A second question, did you have to prep the wood before applying stain, or were you able to apply the stain with only sanding the wood?
I used Western Hemlock, or HemFir. It is the plain stuff they have at Home Depot. You may want to look out you don't get pitchy knots that Douglas Fir can have.

I think a few knots add interest to a large wooden area, but taste is a personal thing. Take a look at mine and see what you think.

In my opinion you want to add height to raise the taps as much as possible on a collared freezer conversion. That is one benefit that towers have.

Just sand the wood before staining. I wish I had sanded more because the remaining scratches are more visible after staining.

Reason: Correcting bonehead spelling
Quaffer is offline
 
Reply With Quote
Old 02-10-2010, 08:59 PM   #8
Gremlyn
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2009
Location: San Diego, CA
Posts: 2,524
Liked 28 Times on 18 Posts
Likes Given: 7

Default

I used 1x8 red oak, didn't insulate it yet and it doesn't seem to be losing a lot of cold through it.
__________________
Quote:
Originally Posted by Yooper View Post
I'm a fan of "getting it in the can"!
Gremlyn is offline
 
Reply With Quote
Old 02-10-2010, 09:16 PM   #9
Brewpatrol
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2009
Location: Sacramento
Posts: 111
Liked 3 Times on 3 Posts

Default

I used 1X6 Knot free Douglas Fir that I found at Home Depot. I liquid nailed 2 together and used clamps. Then I cut them to the size needed. Easiest way to do IMO. You have to make sure the boards are as straight and not bowed in the middle. I found out the hard way when I liquid nailed them together and made the cuts. They wouldnt join flush. Had to make an extra trip back to HD.


Brewpatrol is offline
 
Reply With Quote
Old 02-11-2010, 01:29 AM   #10
HOP-HEAD
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2008
Location: West Michigan
Posts: 520
Liked 10 Times on 9 Posts

Default

Oak stair risers from Menards... also available at HD. 1" wide (nominal) material is plenty for a collar...



HOP-HEAD is offline
Steelers77 Likes This 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Keezer build - hinge question kegtoe Kegerators and Keezers 8 12-22-2009 01:26 PM
Keezer build + pics + line question switched Kegerators and Keezers 7 11-03-2009 05:33 PM
Keezer build question. Ajt012 Kegerators and Keezers 5 08-07-2009 09:58 AM
Keezer Build Question RonRock Kegerators and Keezers 10 01-12-2009 01:21 AM
Starting my keezer build tomorrow, a collar question Chello Bottling/Kegging 3 12-29-2007 03:27 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS