March 809 Trouble shooting! - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > March 809 Trouble shooting!

Reply
 
Thread Tools
Old 02-09-2010, 02:48 AM   #1
DrunkenJamaal
Recipes 
 
Feb 2010
Phoenix
Posts: 35


How do I prime my march pump. I tried testing it by running it through my Keggles I have 12 ft. total length of my high heat hose it will only go to the tip of the hose and no further any advice?

 
Reply With Quote
Old 02-09-2010, 02:50 AM   #2
CodeRage
Death by Magumba!
HBT_LIFETIMESUPPORTER.png
 
CodeRage's Avatar
Recipes 
 
Aug 2007
Melbourne, Fl
Posts: 2,222
Liked 49 Times on 21 Posts


Have the hose end at the lowest point and let it run a bit. while the hose is siphoning/draining turn the pump on. You'll hear it spin up quickly and then the pitch will go lower and water will start screaming out of the hose. Turn the pump off and put the hose where ever. you are now primed.
__________________
Brutus 20e build | Electrical Primer for Brewers | Auber SYL-2362A2 PID Install & Config
So as I am walking out the door this morning I think to my self:
"self, going to work on Monday is like knowing you're going to get kicked in the nuts. You just don't know when or by who"

 
Reply With Quote
Old 02-09-2010, 03:05 AM   #3
DrunkenJamaal
Recipes 
 
Feb 2010
Phoenix
Posts: 35

Thanks man!

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Trouble-shooting chevre beanstock Cheese Making Forum 0 12-29-2009 04:58 PM
Water keeps shooting out of my sight glass Coastarine Equipment/Sanitation 8 02-01-2009 07:14 PM
Shooting for Bud American Ale petep1980 Recipes/Ingredients 21 01-28-2009 03:47 AM
First All-Grain Batch, but not shooting for 5 gallons TrojanAnteater All Grain & Partial Mash Brewing 5 07-03-2008 08:48 PM
ANOTHER mass shooting? Pugilist General Chit Chat 165 02-26-2008 08:21 PM


Forum Jump