Original Gravity problem - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Extract Brewing > Original Gravity problem

Reply
 
Thread Tools
Old 11-09-2006, 07:24 AM   #1
Mike B
Recipes 
 
Nov 2006
New York, NY
Posts: 88


Anyone ever have problems with inexplicably low original gravities? With my last 3 batches, the gravity has been coming up 25%-50% short. (My expectations are based on appendix 11 of the 3rd edition of the Complete Joy of Homebrewing). Obviously, I can just add some more fermentables to get the gravity I want, but I'd like to find out what's causing the problem.


Relevant Details:
I usually boil about 2.5 gallons for a 5 gallon batch;
I mix and aerate the wort before taking a sample;
My samples are usually around 70 degrees when I take a reading, and I adjust the reading accordingly;
I've checked the hydrometer, and it's fine;
I've had this problem with both LME and DME;
These have been all extract, so the answer can't be that I'm messing up the mash;


Again, I realize that this isn't hard to remedy, but does anyone have any suggestions for why I might have this problem now? All of my batches before these last three have been pretty much right on.

Thanks for any suggestions, I appreciate any advice.

Cheers!
-Mike


 
Reply With Quote
Old 11-09-2006, 08:27 AM   #2
Brewsmith
 
Brewsmith's Avatar
Recipes 
 
Aug 2005
Torrance, CA
Posts: 6,252
Liked 62 Times on 58 Posts


Can you give a recipe with how much ingredients you started with?
__________________
Fermenting:#160 Apollo/Calypso Pale Ale
Kegged:#153 Old Helicon Barleywine 2013, #157 Irish Red, #158 Mosaic IPA, #159 Bravo/Delta ESB
Up Next:Brown Porter, American Stout, Imperial Stout
My Recipes
Tuba Sonata

Smith & Co. Custom Tap Handles

 
Reply With Quote
Old 11-09-2006, 02:57 PM   #3
david_42
 
david_42's Avatar
Recipes 
 
Oct 2005
Oak Grove, Oregon, USA
Posts: 25,595
Liked 152 Times on 143 Posts


We need numbers, because it is impossible for an extract recipe to be off on the original gravity, unless the wrong amount of water and/or extract is used. Or the calculations (expectations) are wrong.
__________________
Remember one unassailable statistic, as explained by the late, great George Carlin: "Just think of how stupid the average person is, and then realize half of them are even stupider!"

"I would like to die on Mars, just not on impact." Elon Musk

 
Reply With Quote
Old 11-09-2006, 03:12 PM   #4
Brewpilot
Recipes 
 
Aug 2006
Fort Wayne, IN
Posts: 362

Yeah, if you are using extract, your numbers should be dead on... in my last AG I used 7lbs of Maris Otter and got 1.042... with 5.25 gallons going to the fermenter. If I calculated that correctly, that is in the high 70's%. That was my best ever
Brewpilot

 
Reply With Quote
Old 11-11-2006, 07:12 AM   #5
Mike B
Recipes 
 
Nov 2006
New York, NY
Posts: 88

After having gravity problems with a couple of partial-mash batches, I decided to "dumb it down" for my most recent batch, to try to figure out what's going on. This is probably the best example to provide:

I used 5lbs of DME for a five gallon batch. According to The Complete Joy of Homebrewing, that should yield about 1.042-1.046. My reading was 1.033.

Again, I've double and triple checked the hydrometer and all other measurements. I've made batches with extract from different sources to try to rule out the possibility that I'm just getting some bad extract.

I realize that this can be easily remedied by adding more fermentables, but if anyone has any idea what else could be causing this, I'd appreciate your advice.

Thanks!
-Mike

 
Reply With Quote
Old 11-11-2006, 08:07 AM   #6
Brewsmith
 
Brewsmith's Avatar
Recipes 
 
Aug 2005
Torrance, CA
Posts: 6,252
Liked 62 Times on 58 Posts


Are you sure you ended up with 5 gallons? How are you measuring the volume in your fermenter? My other thought is how is the DME packaged? Is it generic and packaged by the LHBS or a name brand? Are they ripping you off and putting less in the bag?
__________________
Fermenting:#160 Apollo/Calypso Pale Ale
Kegged:#153 Old Helicon Barleywine 2013, #157 Irish Red, #158 Mosaic IPA, #159 Bravo/Delta ESB
Up Next:Brown Porter, American Stout, Imperial Stout
My Recipes
Tuba Sonata

Smith & Co. Custom Tap Handles

 
Reply With Quote
Old 11-11-2006, 08:11 AM   #7
Brewsmith
 
Brewsmith's Avatar
Recipes 
 
Aug 2005
Torrance, CA
Posts: 6,252
Liked 62 Times on 58 Posts


I was just reading this thread: http://homebrewtalk.com/showthread.php?t=16247
and was wondering if you were pouring water into the fermenter to top up the volume after the boil and then checking the gravity? If you pour it in and don't shake it up, you will get a falsely low OG. Wort is heavier than water, so the water will kinda "float" on top of you don't mix it.
__________________
Fermenting:#160 Apollo/Calypso Pale Ale
Kegged:#153 Old Helicon Barleywine 2013, #157 Irish Red, #158 Mosaic IPA, #159 Bravo/Delta ESB
Up Next:Brown Porter, American Stout, Imperial Stout
My Recipes
Tuba Sonata

Smith & Co. Custom Tap Handles

 
Reply With Quote
Old 11-11-2006, 12:05 PM   #8
the_bird
10th-Level Beer Nerd
HBT_LIFETIMESUPPORTER.png
 
the_bird's Avatar
Recipes 
 
May 2006
Adams, MA
Posts: 20,889
Liked 528 Times on 424 Posts


Quote:
Originally Posted by Brewsmith
I was just reading this thread: http://homebrewtalk.com/showthread.php?t=16247
and was wondering if you were pouring water into the fermenter to top up the volume after the boil and then checking the gravity? If you pour it in and don't shake it up, you will get a falsely low OG. Wort is heavier than water, so the water will kinda "float" on top of you don't mix it.
I've done that. Unfortunately, I did it with a batch that I split into two fermenters, so I ended up with one awesome, incredibly malty, full-bodied beer, and a second that was decidedly LESS SO.
__________________
Come join Yankee Ingenuity!

"I'm kind of toasted. But I looked at my watch and it's only 6:30 so I can't stop drinking yet." - Yooper's Bob
"Brown eye finally recovered after the abuse it endured in Ptown last weekend, but it took almost a full week." - Paulie
"no, he just doesn't speak 'stupid'. i, however, am fluent...." - motobrewer
"... I'll go both ways." - Melana

 
Reply With Quote
Old 11-11-2006, 03:08 PM   #9
david_42
 
david_42's Avatar
Recipes 
 
Oct 2005
Oak Grove, Oregon, USA
Posts: 25,595
Liked 152 Times on 143 Posts


Nothing wrong with a Small beer. Years ago, people would batch sparge and ferment each run separately.
__________________
Remember one unassailable statistic, as explained by the late, great George Carlin: "Just think of how stupid the average person is, and then realize half of them are even stupider!"

"I would like to die on Mars, just not on impact." Elon Musk

 
Reply With Quote
Old 11-11-2006, 04:45 PM   #10
feedthebear
Recipes 
 
Sep 2006
Utah
Posts: 695
Liked 6 Times on 6 Posts


Quote:
Originally Posted by Brewsmith
My other thought is how is the DME packaged? Is it generic and packaged by the LHBS or a name brand? Are they ripping you off and putting less in the bag?
Its interesting that you said that. I checked my two 1lb bags I used in my brew yesterday with the new scale I bought. One was 0.25oz. short and the other was 0.5oz. short.

Bastards. I'm going to have to start buying the 5lb package so I can measure out 2lb properly.


I clean my equipment with Straight A. I've noticed that if I have some residue of it on my hydrometer, I get false low readings.
__________________
Planning: Agave Witbock, Raisin Beer
Primary: GF Hazelnut Stout
Tertiary: Cranberry-Pom pLambic (est. bottle date: 03/01/08)
Drinking: Cab.Sav/Merlot Wine, Grand Cru, Hazelnut Stout #3, Ordinary Bitter


 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Original gravity problem--too low? eaglehoo General Beer Discussion 9 08-24-2009 01:43 PM
Original Gravity seems Low... burtybeer General Beer Discussion 7 12-31-2008 02:16 AM
Original gravity a little off paranode Extract Brewing 8 04-03-2007 01:54 PM
Help with original gravity? Nexus555 Beginners Beer Brewing Forum 2 03-12-2007 02:36 AM
Original Gravity? Gilbey General Techniques 5 09-20-2005 07:22 PM


Forum Jump