$112 Tri Clover RIMS Tube Pictures - Page 7 - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > $112 Tri Clover RIMS Tube Pictures

Reply
 
Thread Tools
Old 04-13-2011, 11:10 AM   #61
pola0502ds
Recipes 
 
Jan 2011
Posts: 889
Liked 2 Times on 2 Posts


Quote:
Originally Posted by thewurzel View Post
Looks Interesting Derrins rims Tube with sight glass. Nice
Do you use a 220VAC element in there as its long enough?

Your Therminator also Looks Interesting. Care to share?

I"m sure the clamp that i use would also fit your tubing.
I am using a 1500w 120v element from plumbing supply. I think it's overall length is 7 or 8 inchs. Thats all I need for a RIMS setup. I also have valves that welders use on their torches so I can control the burners so that there is barely a flame but just enough to produce heat without burning the wort.

The terminator setup, I liked the chill-wizard from sabco so i tried to do something similar, it's still not done yet as i am waiting on parts but heres the deal. I have a thermometer on the outlet of the wort and the inlet of the water, it just makes it nice to see what your incoming water is to help throttle the valves. Then i have a sight glass on the wort out connected to a tee with a diffusion stone in one end and a valve on the other. This will be my inline aeration fixture. Thats about it.
Click image for larger version

Name:	41211 007.JPG
Views:	984
Size:	77.8 KB
ID:	23992   Click image for larger version

Name:	41211 009.JPG
Views:	983
Size:	77.1 KB
ID:	23993  

 
Reply With Quote
Old 03-12-2012, 05:18 AM   #62
EarthBound
Recipes 
 
Mar 2010
Beer Capital of the World
Posts: 1,069
Liked 12 Times on 11 Posts


Guy-

I know I'm diggin up an old thread, but how was this tube worked out for you so far? Well enough, I assume...
__________________
"You can do anything you set your mind to when you have vision, determination, and an endless supply of beer."

 
Reply With Quote
Old 04-26-2013, 12:55 PM   #63
GrantH
Recipes 
 
Oct 2010
Hattiesburg, MS, Mississippi
Posts: 326
Liked 7 Times on 6 Posts


I'm interested to hear this as well. I am looking at the 1.5" system, with the 1" reducer for the element and I can't decide which thermocoupler I want to use with which controller.

 
Reply With Quote
Old 04-28-2013, 01:39 AM   #64
thewurzel
HBT_LIFETIMESUPPORTER.png
 
thewurzel's Avatar
Recipes 
 
Apr 2008
Baltimore, MD
Posts: 320
Liked 17 Times on 12 Posts


Quote:
Originally Posted by GrantH View Post
I'm interested to hear this as well. I am looking at the 1.5" system, with the 1" reducer for the element and I can't decide which thermocoupler I want to use with which controller.
still use mine works great

I have a Auber PID SLY 4342 as stated in thread Rims for dummies
I only use the Pt 100 RTD sensors which have disconnects making them easier to handle clean and not so worried about breaking or kinking the cables.
you can get the sensors from Auber instruments 1/2" mpt Thread or the Tri Clamp sensor. they also have may more sensor types to chose from, to suit your needs.
pay the extra for the Deluxe cable option and you can put a plug on the controller box and rims unit and or HLT / Mash Tun, have a cable to plug and play in between.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
RIMS Heating Tube Emian Equipment/Sanitation 33 11-21-2013 12:53 AM
Build a relatively inexpensive Tri-Clover RIMS Tube? Sawdustguy Brew Stands 62 08-06-2011 03:36 AM
New Stainless Sabco False Bottom, Hop Stopper, Rims Tube & Element, SS fittings Woodchuck For Sale 2 02-02-2010 02:20 AM
RIMS: MLT/E-Keggle outlets, dip tube VS bottom valve MonkeyWrench Equipment/Sanitation 3 12-08-2009 04:56 PM
Tri clover... Beermaker Equipment/Sanitation 0 04-18-2006 08:50 AM


Forum Jump