Coldbreak Brewing Giveaway - Open to All!

Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > mash sat for ~2 hours before I could boil...
Reply
 
Thread Tools
Old 02-01-2010, 02:48 PM   #1
motobrewer
I'm no atheist scientist, but...
HBT_SUPPORTER.png
Feedback Score: 1 reviews
Recipes 
 
Join Date: Oct 2009
Location: Thiensville, Wisconsin
Posts: 7,469
Liked 353 Times on 286 Posts
Likes Given: 475

Default mash sat for ~2 hours before I could boil...

So, my buddy was over brewing on my equipment. To cut down on time, i thought i'd mash while he made his extract brew.

Long story short, I collected my runnings into a bottling bucket, because he was still cooling/racking/scrubbing (he added LME to the pot while it was still on the burner - that stuff burns real good!). Anyway, my runnings sat in the bucket (un-mashed-out) for about 2 hours, then i racked and boiled.

anyone see a source of off flavors in this thing?


motobrewer is offline
 
Reply With Quote
Old 02-01-2010, 03:22 PM   #2
ArcaneXor
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2007
Posts: 4,559
Liked 112 Times on 100 Posts
Likes Given: 32

Default

Two hours should be ok - not enough time for any bacteria to impart any detectable off-flavors.


ArcaneXor is offline
 
Reply With Quote
Old 02-01-2010, 03:23 PM   #3
motobrewer
I'm no atheist scientist, but...
HBT_SUPPORTER.png
Feedback Score: 1 reviews
Recipes 
 
Join Date: Oct 2009
Location: Thiensville, Wisconsin
Posts: 7,469
Liked 353 Times on 286 Posts
Likes Given: 475

Default

well, i boiled after anyway.

i'm more concerned that since i didn't mash-out, the enzymes kept working and i'll end up with a very dry bitter.

but i'm still very new at all this, so....
motobrewer is offline
 
Reply With Quote
Old 02-01-2010, 03:29 PM   #4
ArcaneXor
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2007
Posts: 4,559
Liked 112 Times on 100 Posts
Likes Given: 32

Default

I suppose that's possible. You can track the SG of the beer throughout fermentation, and if it looks like it'll undershoot your desired FG, you can crash cool the fermenter for a few days and rack the beer off the yeast, maybe onto some gelatin. That should convince most of the yeast to quit.
ArcaneXor is offline
 
Reply With Quote
Old 02-01-2010, 03:33 PM   #5
Lil' Sparky
Cowboys EAC
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Lil' Sparky's Avatar
Recipes 
 
Join Date: Feb 2006
Location: Honolulu, HI
Posts: 4,013
Liked 58 Times on 36 Posts

Default

I think you'll probably be fine.
__________________
Quote:
Originally Posted by duffman2 View Post
I dub this beer the Double Slutty Triple Nutty Bodacious Booty Brunette!
Lil' Sparky is offline
 
Reply With Quote
Old 02-01-2010, 08:14 PM   #6
Beernik
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2009
Location: salt lake city, ut
Posts: 3,412
Liked 451 Times on 337 Posts
Likes Given: 27

Default

Correct me if I'm wrong,

The enzymes for conversion are only active between 140F and 160F. So unless you held the temp, you stopped the conversion when it dropped out of the range. Also, if you fully converted, then it wouldn't matter if you held the temp.

Also, if you mashed out at 170F, doesn't that stop all enzymatic action? If it doesn't, I think your only risk might be too acidic of a mash if it spent too much time around 95F.
__________________
Tattooist: What do you want in the dream catcher?
Client: Do what ever you want.
Tattooist: Can I put Cthulhu in it?
Client: NO!
Tattooist: Then don't tell me to do whatever I want.
Beernik is offline
 
Reply With Quote
Old 02-01-2010, 08:39 PM   #7
motobrewer
I'm no atheist scientist, but...
HBT_SUPPORTER.png
Feedback Score: 1 reviews
Recipes 
 
Join Date: Oct 2009
Location: Thiensville, Wisconsin
Posts: 7,469
Liked 353 Times on 286 Posts
Likes Given: 475

Default

again, i didn't mash out.

Quote:
Originally Posted by Beernik View Post
The enzymes for conversion are only active between 140F and 160F. So unless you held the temp, you stopped the conversion when it dropped out of the range.
this is what I was thinking, just wondering if it was accurate.
motobrewer is offline
 
Reply With Quote
Old 02-01-2010, 08:43 PM   #8
DeathBrewer
Maniacally Malty
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
DeathBrewer's Avatar
Recipes 
 
Join Date: Apr 2007
Location: Oakland, CA
Posts: 21,925
Liked 236 Times on 127 Posts

Default

You're fine. I've mashed for up to 5 hours (maybe more) on occasion. Often I'll mash in when I get home and then go out for drinks and dinner, before returning to sparge and boil.

What temp(s) did you mash at?
__________________
Easy Partial Mash Brewing - Stovetop All-Grain Brewing

"Death is always with us." - Brewpastor

Quote:
DIAICYLF
We will remember...
DeathBrewer is offline
 
Reply With Quote
Old 02-01-2010, 08:51 PM   #9
motobrewer
I'm no atheist scientist, but...
HBT_SUPPORTER.png
Feedback Score: 1 reviews
Recipes 
 
Join Date: Oct 2009
Location: Thiensville, Wisconsin
Posts: 7,469
Liked 353 Times on 286 Posts
Likes Given: 475

Default

153 fahren10chars
motobrewer is offline
 
Reply With Quote
Old 02-02-2010, 02:10 PM   #10
Lil' Sparky
Cowboys EAC
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Lil' Sparky's Avatar
Recipes 
 
Join Date: Feb 2006
Location: Honolulu, HI
Posts: 4,013
Liked 58 Times on 36 Posts

Default

Quote:
Originally Posted by Beernik View Post
Correct me if I'm wrong,

The enzymes for conversion are only active between 140F and 160F. So unless you held the temp, you stopped the conversion when it dropped out of the range. Also, if you fully converted, then it wouldn't matter if you held the temp.

Also, if you mashed out at 170F, doesn't that stop all enzymatic action? If it doesn't, I think your only risk might be too acidic of a mash if it spent too much time around 95F.
The wort probably sat at a temp where the enzymes could still work (even if not in their ideal range), but you're right, when the starches are fully converted, there's not much else to do. The enzymes might continue to break down some of the chains to more fermentable sugars, but I doubt there would be much effect. Like DeathBrewer, a lot of guys have used unusually long mashes with good results.


__________________
Quote:
Originally Posted by duffman2 View Post
I dub this beer the Double Slutty Triple Nutty Bodacious Booty Brunette!
Lil' Sparky is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
First full boil in 6 hours, and still questions! underwaterdan Extract Brewing 3 11-22-2009 09:02 PM
Mash now, boil later Hoppus_Poppatopolis General Beer Discussion 9 10-07-2009 01:58 PM
Mash day one, boil day two jeremyx All Grain & Partial Mash Brewing 10 09-28-2009 03:51 PM
First AG- mash & Boil volume vs hop boil quickerNu All Grain & Partial Mash Brewing 12 06-20-2008 02:36 PM
mash now boil later? natefitz All Grain & Partial Mash Brewing 7 02-24-2008 06:01 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS