Bronze Replacement Head for March 809 Pump, question - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Bronze Replacement Head for March 809 Pump, question

Reply
 
Thread Tools
Old 01-24-2010, 09:13 PM   #1
Gammon N Beer
Recipes 
 
Dec 2007
WI
Posts: 714
Liked 10 Times on 10 Posts



I have acquired a bronze replacement head for my March 809 pump. I now find I need the pin that the empeller rides on.

The one from the old plastic head cannot be switched out. Any ideas where I can pick one up?

 
Reply With Quote
Old 01-25-2010, 05:25 PM   #2
pompeiisneaks
Why that human mask?
HBT_LIFETIMESUPPORTER.png
 
pompeiisneaks's Avatar
Recipes 
 
Jan 2009
Redmond, WA
Posts: 853
Liked 52 Times on 29 Posts


Odd, the march pump I have w/ the polysulfonate head did have a pin that would just pull out, it was a bit tight, possibly due to stuff binding it up a bit, but it did come out. I bought a replacement head casing for mine when I broke one of the threaded ends, and I had to pull out my impeller and pin... but it worked fine.
__________________
~Phil
Fermenting/Kegged/Bottled NONE :( I moved to the NW and haven't had time to setup my brew rig since! (but hey, I'm in the Pacific NW so there's so much awesome beer I don't need to brew it as much hah!

 
Reply With Quote
Old 01-25-2010, 06:48 PM   #3
Gammon N Beer
Recipes 
 
Dec 2007
WI
Posts: 714
Liked 10 Times on 10 Posts


Quote:
Originally Posted by pompeiisneaks View Post
Odd, the march pump I have w/ the polysulfonate head did have a pin that would just pull out, it was a bit tight, possibly due to stuff binding it up a bit, but it did come out. I bought a replacement head casing for mine when I broke one of the threaded ends, and I had to pull out my impeller and pin... but it worked fine.
The poly head has an impeller shaft that has a, "D" shape at the motor end.

I broke that poly head and bought a bronze head. It has a screw end for the shaft that holds the impeller. When the bronze head arrived, it did not have the shaft.

I am in communication with the company and I hope they make it right for me. They now, because of my issue have listed the bronze head with the correct shaft.

 
Reply With Quote
Old 01-30-2010, 02:43 PM   #4
Gammon N Beer
Recipes 
 
Dec 2007
WI
Posts: 714
Liked 10 Times on 10 Posts


Quote:
Originally Posted by Gammon N Beer View Post
The poly head has an impeller shaft that has a, "D" shape at the motor end.

I broke that poly head and bought a bronze head. It has a screw end for the shaft that holds the impeller. When the bronze head arrived, it did not have the shaft.

I am in communication with the company and I hope they make it right for me. They now, because of my issue have listed the bronze head with the correct shaft.
The part number for the impeller shaft with the screw end that works with the brass heads is: PN# 0809-0008-1000

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
March Pump Bronze Replacement Head doggage Equipment/Sanitation 25 08-28-2011 02:33 PM
March Pump SS Head? Best Price? Simphoto02 Equipment/Sanitation 28 12-07-2010 07:39 AM
Replacement pump head needed for Sabco Brew-Magic Noleafclover Equipment/Sanitation 2 01-11-2010 07:24 AM
March Pump Head Orientation harley03 Equipment/Sanitation 13 09-26-2009 02:31 AM
March Pump Head Flip? CodeRage Equipment/Sanitation 1 04-27-2008 09:43 PM


Forum Jump