BK sight gauge - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns & Hot Liquor Tanks > BK sight gauge

Thread Tools
Old 01-23-2010, 06:43 PM   #1
Oct 2009
Posts: 198
Liked 2 Times on 2 Posts

Is it possible to put a sight gauge on the BK say at about the 4.5 gall mark? this should cover all the boils and let you see the level without having to measure just a idea as I am getting ready to do a full weld up on my kegs.

Reply With Quote
Old 01-23-2010, 07:47 PM   #2
Weissbier's Avatar
Oct 2009
Long Island
Posts: 69
Liked 1 Times on 1 Posts

I purchased mine from weldlessfittings.com and installed it as low as possible. When calibrating it, the minimum it would read was 4.5 gallons, so you are set. I measured out 10 gallons and it was 3/4 up the sight glass.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
DIY Sight Gauge ghack Kettles, Mash Tuns & Hot Liquor Tanks 18 01-17-2015 04:07 PM
THE POLs $3 MLT & HLT Sight Gauge!! The Pol Kettles, Mash Tuns & Hot Liquor Tanks 25 08-27-2010 04:46 PM
POLS $10 HLT Sight Gauge! The Pol Equipment/Sanitation 60 04-18-2009 06:49 PM
sight gauge Gumbys_Brew Equipment/Sanitation 6 02-15-2009 12:40 AM
Combining outlet and sight gauge? Cpt_Kirks Equipment/Sanitation 3 11-19-2008 12:16 AM

Forum Jump