Pliny the Elder Clone - Page 3 - Home Brew Forums
Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Pliny the Elder Clone
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 01-20-2010, 10:20 PM   #21
naamanf
HBT_SUPPORTER.png
Recipes 
 
Dec 2009
Manhattan KS
Posts: 44
Liked 2 Times on 2 Posts


Main came in today. Hope to do it up this weekend. 17oz does look like a lot of hops.



 
Reply With Quote
Old 01-21-2010, 12:55 AM   #22
Bensiff
Recipes 
 
Mar 2008
, Washington, the state
Posts: 4,848
Liked 377 Times on 296 Posts


Pliny's IBU's are actual and not calculated so that is your difference. You want it to finish down towards 1.010. To dry it out some, Vinnie uses some dextrin to help out with that. Here's his recipe if it helps...

http://beerdujour.com/Recipes/1Pliny...lone%20PDF.pdf

I have one I built off the the grain schedule and my own schedule in the better bottle right now. Expect to lose quite a bit from the hop material. If I ever make one of these again I will invest in a false bottom for my boiler to strain it.



 
Reply With Quote
Old 01-24-2010, 02:41 AM   #23
Netflyer
HBT_LIFETIMESUPPORTER.png
 
Netflyer's Avatar
Recipes 
 
Oct 2009
Near Benedict Maryland
Posts: 777
Liked 9 Times on 9 Posts


Still even in a hop bag, I expect the amount of wort lost will be large... From that link an 8 gallon gross yielded 5 gallons, after dry hoping and such you think that loss was all due to hop soakage?
__________________
Primaries:


Kegged:
RiClarke's Guinuess Clone w/da sour 6.4% ABV 1057 SG 1009 FG


 
Reply With Quote
Old 01-24-2010, 03:27 AM   #24
Bensiff
Recipes 
 
Mar 2008
, Washington, the state
Posts: 4,848
Liked 377 Times on 296 Posts


A combo of both massive hops and that there is more break material than a normal brew due to its higher than normal gravity. I will end up with about 4 gallons by the time it hits the kegerator.

 
Reply With Quote
Old 01-29-2010, 12:54 AM   #25
Netflyer
HBT_LIFETIMESUPPORTER.png
 
Netflyer's Avatar
Recipes 
 
Oct 2009
Near Benedict Maryland
Posts: 777
Liked 9 Times on 9 Posts


I'm brewing this on Sunday... I'll report back I asked in another thread about a few issues on the supplied brewsheet... mash temp at 150 for 60 min, and 1.5 oz of Chinook Hops (is it a first wort or a mash hops)... I'll post the answers here. I'll either get an answer before Sat on that thread or I'll call AHS...
__________________
Primaries:


Kegged:
RiClarke's Guinuess Clone w/da sour 6.4% ABV 1057 SG 1009 FG


 
Reply With Quote
Old 01-29-2010, 01:04 AM   #26
Suicided1954
Recipes 
 
Dec 2009
Texas
Posts: 86
Liked 1 Times on 1 Posts


Quote:
Originally Posted by Netflyer View Post
(is it a first wort or a mash hops)...
I mash hopped mine... I brewed last weekend. I hope I was right.

 
Reply With Quote
Old 01-29-2010, 02:40 AM   #27
Netflyer
HBT_LIFETIMESUPPORTER.png
 
Netflyer's Avatar
Recipes 
 
Oct 2009
Near Benedict Maryland
Posts: 777
Liked 9 Times on 9 Posts


Did you mash at 150? What was your boil size and finish size?
__________________
Primaries:


Kegged:
RiClarke's Guinuess Clone w/da sour 6.4% ABV 1057 SG 1009 FG


 
Reply With Quote
Old 01-29-2010, 02:48 AM   #28
wildwest450
Registered User
Recipes 
 
Dec 2007
Posts: 8,969
Liked 172 Times on 157 Posts


Yes you mash at 150, and the chinook is mash hopped not fwh, just chuck it in with the grains.

k_hehenberger Likes This 
Reply With Quote
Old 01-29-2010, 02:54 AM   #29
Netflyer
HBT_LIFETIMESUPPORTER.png
 
Netflyer's Avatar
Recipes 
 
Oct 2009
Near Benedict Maryland
Posts: 777
Liked 9 Times on 9 Posts


One more initial q, the brewsheet says not to run off more than 6.25... why? I need to boil 8 gallons to get me 5 gal over 90 min with my kettle. I guess I just have to adjust the grist w/beersmith? I thought it was ok to sparge to my starting boil volume, even if it is 8 gal. I mean 6.25 gal boil over 90 min would yield much less than 5 gal finish with even a moderate evap and trub loss. So, I'm a bit confused there..
__________________
Primaries:


Kegged:
RiClarke's Guinuess Clone w/da sour 6.4% ABV 1057 SG 1009 FG


 
Reply With Quote
Old 01-29-2010, 03:00 AM   #30
Steelers77
Vendor
HBT_SPONSOR.png
 
Steelers77's Avatar
Recipes 
 
Feb 2009
Janesville, WI
Posts: 2,107
Liked 79 Times on 65 Posts


Could you post the recipe for this?


__________________
Pearl Malt is back in stock!

Get your hops, 85 varieties starting at $.75/oz!

Accuflex Bev Seal Ultra in stock now!

Farmhousebrewingsupply.com

http://farmhousebrewingsupply.com

https://www.facebook.com/Farmhousebrewingsupply

Twitter: https://twitter.com/Farmhousebrew

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Holy Crap!! Pliny the Elder clone at austin homebrew supply. LoneOakDesign Recipes/Ingredients 56 07-07-2013 08:12 PM
Target Water Profile for Pliny the Elder Clone stevenryals Brew Science 21 03-05-2012 10:59 PM
I need a Pliny the Elder! hukdizzle Sampling and Critiquing and Beer Swapping 4 12-24-2008 10:43 PM


Forum Jump