Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Loss of Pressure
Reply
 
Thread Tools
Old 01-17-2010, 12:32 PM   #1
hlumbard
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2009
Posts: 192
Liked 6 Times on 4 Posts
Likes Given: 3

Default Loss of Pressure

I just picked up my first two kegs and hooked them up to a regulator my dad got for me. It's not new but it looks like I'm good to go. My question is this:

I hooked up the kegs and turned everything on to about 15psi to make sure everything hold pressure. First of all the tank never stopped completely making noise. I could still faintly hear gas moving. Is this normal? And second (OK I guess 2 questions) I then turned the knob off on the tank and the pressure gauge for the tank side slowly went to 0. Doesn't this mean I'v got a leak somewhere? Shouldn't the regulator have held the tank side even if the tank was turned off?

Either way, I can't wait to get some beer in those bad boys!


__________________
MORE DIY PROJECTS!!!!
hlumbard is offline
 
Reply With Quote
Old 01-17-2010, 01:53 PM   #2
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 4 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,832
Liked 1346 Times on 881 Posts
Likes Given: 35

Default

This was with no liquid in the kegs right? If so, it does sound like you have a leak. Put a little soapy water in each keg, pressurize and shake it. It's probably the lid.
__________________
Welcome to BrewHardware.com. I love you.
New 100% Stainless Steel Heating Elements are IN! ULWD 5500w Ripple, 2000w, 1500w, etc
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.
Bobby_M is online now
 
Reply With Quote
Old 01-17-2010, 02:10 PM   #3
brewmonk
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2009
Location: Sharon,MA
Posts: 1,123
Liked 14 Times on 14 Posts
Likes Given: 84

Default

I have the same problem once in a while.
So I wet the big o-ring on the keg lid, and pressurize it more than that (usually if you hit 20-30 psi, it will seal the keg tight enough to stay sealed even when the pressure drops).

worth a try. make 4.5 gals of seltzer for your test run?
__________________
-I'm not getting older, but the floor is getting further away.
brewmonk is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
understanding high pressure versus low pressure propane BucksPA Brew Stands 126 12-03-2014 06:01 PM
Low pressure vs. high pressure Propane bgw Equipment/Sanitation 3 08-02-2009 04:39 PM
5 gallon glass secondary + some beer loss or 10 gallon plastic & no loss? brewssuds Beginners Beer Brewing Forum 1 07-06-2008 06:23 PM
Dispensing pressure VS Serving pressure EricK The Red Bottling/Kegging 10 03-01-2008 06:06 AM
Loss of pressure in keg Ochre Bottling/Kegging 13 11-14-2005 08:08 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS