Hybrid HLT/BK controller

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

LKHA

Well-Known Member
Joined
Oct 29, 2009
Messages
195
Reaction score
2
Location
Maynard
Let the build start.I have most of the parts. Will be one controller that should be able to control both sides of the brew rig one side at a time unless I can tweak the amps. The rig should be able to operate primary/elec secondary LP. The controls are based off of POL's build.
0114001922.jpg
 
most the cutting is done on the panel now to repaint and do the assembly. My source for the new kegs has not came through yet so not a big push but I will be ready for them.
 
After alot of help from here (Thanks POL) it is complete here are some pics
wiriring.jpg

inside wiring
frt.jpg

frt controls
bottom.jpg

bottom hook ups left to right is the RDT, 220v in, 110v out(pump)
back.jpg

back view SSR heat sink and 220(element) out
 
last step complete the element has been epoxied and now drying ready for the testing
 
first run done tonight this thing will be great slowly learning the controls but it is easy to follow instructions. have to figure the manual settings then wil be good to go as a bk.
 
Back
Top