Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > General Beer Discussion > Recipe called for crushed barley, but my kit came with non-crushed barley
Reply
 
Thread Tools
Old 01-11-2010, 07:12 PM   #1
knelson
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: Hudson, WI
Posts: 107
Default Recipe called for crushed barley, but my kit came with non-crushed barley

After reading through the ingredient list of my first homebrew (EPA from Northern Brewer-Extract) i noticed that it called for Crushed barley.

The barley that came with the kit was not crushed (at lease from what I could tell) I looked up a picture online of crushed barley and what I had looked nothing like it.

Is it typical to receive uncrushed barely? Did NB mean for me to use the barley as is?

What we did was took the grains out of the bag and hit them with a hammer insed of a towel in an attempt to crush as much as possible. It worked fairly well.

Any insight? Should we have used them as is?


knelson is offline
 
Reply With Quote
Old 01-11-2010, 07:15 PM   #2
lunchbox
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2009
Location: North Carolina
Posts: 434
Liked 10 Times on 9 Posts
Likes Given: 1

Default

Normally kits come crushed, but I have seen some sites that give you the option of having them whole. Perhaps this just got mixed up?


lunchbox is offline
 
Reply With Quote
Old 01-11-2010, 07:18 PM   #3
knelson
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: Hudson, WI
Posts: 107
Default

Sorry, i meant to post this in the Beginners forum. But anyway. I live close to St. Paul so I am able to buy direct form the Northern Brewer store. I guess I will just ask them next time I buy a kit. It seems as though there may have been a mix up. Especially seeing that I asked for an easy beginner brew to start with and they recommended the EPA. I wouldnt imagine that you would need a mill just starting off.
knelson is offline
 
Reply With Quote
Old 01-11-2010, 07:24 PM   #4
springer
Feedback Score: 0 reviews
 
springer's Avatar
Recipes 
 
Join Date: Feb 2008
Location: Wappingers falls NY
Posts: 4,993
Liked 23 Times on 21 Posts

Default

The barley needs to be crushed. If its a small amount just use a plastic bag and a rolling pin.
__________________
'The taxpayer: That's someone who works for the federal government but doesn't have to take the civil service examination.'- Ronald Reagan
springer is offline
 
Reply With Quote
Old 01-11-2010, 07:25 PM   #5
josiahcox
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2009
Location: Bellingham
Posts: 165
Liked 2 Times on 2 Posts

Default

I just got my chinook IPA kit from them and the specialty grain was not crushed as well. Not a big deal to me, I just crushed it myself, but it sounds like you should ask them next time you order. You don't need a mill. It just makes it easier. I used the bottom of a pan and a chopping board and crushed away.
I know that's more work then you may want to do but it will work.
josiahcox is offline
 
Reply With Quote
Old 01-11-2010, 07:25 PM   #6
Revvy
Post Hoc Ergo Propter Hoc
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Revvy's Avatar
Recipes 
 
Join Date: Dec 2007
Location: "Detroitish" Michigan
Posts: 40,812
Liked 2874 Times on 1699 Posts
Likes Given: 3511

Default

Quote:
Originally Posted by springer View Post
The barley needs to be crushed. If its a small amount just use a plastic bag and a rolling pin.
If you don't have a rolling pin, a champagne, wine or even a beer bottle will work in a pinch.
__________________
Like my snazzy new avatar? Get Sons of Zymurgy swag, here, and brew with the best.

Revvy's one of the cool reverends. He has a Harley and a t-shirt that says on the back "If you can read this, the bitch was Raptured. - Madman

I gotta tell ya, just between us girls, that Revvy is HOT. Very tall, gorgeous grey hair and a terrific smile. He's very good looking in person, with a charismatic personality... he drives like a ****ing maniac! - YooperBrew
Revvy is offline
 
Reply With Quote
Old 01-11-2010, 07:33 PM   #7
knelson
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: Hudson, WI
Posts: 107
Default

Great, Thanks for all the good Ideas. I dont have a rolling pin but I have many wine bottles laying around....the hammer was kind of fun though!
knelson is offline
 
Reply With Quote
Old 01-11-2010, 07:45 PM   #8
passedpawn
Waste Allocation Load Lifter - Earth Class
HBT_MODERATOR.png
Feedback Score: 1 reviews
 
passedpawn's Avatar
Recipes 
 
Join Date: Apr 2009
Location: ☼ Clearwater, FL ☼
Posts: 22,046
Liked 4835 Times on 2889 Posts
Likes Given: 4051

Default

Put it int a paper bag and run over it a few times with your car. I haven't tried this, but i'd give it a shot if my mill broke. I have use the rolling pin and that was quite a job.


__________________
- Andrew
passedpawn is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Is my barley crushed...enough? SpanishCastleAle All Grain & Partial Mash Brewing 7 01-08-2009 11:15 PM
Can you roast flaked Barley to make Roasted Barley bigbellybrewery Recipes/Ingredients 5 06-18-2008 03:29 PM
Substitute hulled barley for flaked barley? TheDom Recipes/Ingredients 8 03-04-2008 12:31 PM
Recipe calls for chocolate malt. I assume that has to be crushed grain? britishbloke Beginners Beer Brewing Forum 2 02-08-2007 09:10 PM
Crushed Pale Malt, Obliterated Choc. and Barley pbowler All Grain & Partial Mash Brewing 4 09-21-2006 03:25 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS