Help with Beer (Liquid Out) disconnect on Corny Keg - Page 2 - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Help with Beer (Liquid Out) disconnect on Corny Keg

Reply
 
Thread Tools
Old 01-08-2010, 11:52 PM   #11
ShortSnoutBrewing
Kwanesum Chinook Illahee
HBT_LIFETIMESUPPORTER.png
 
ShortSnoutBrewing's Avatar
Recipes 
 
Oct 2007
Portland, OR
Posts: 3,213
Liked 19 Times on 17 Posts


I first thought it was the QD too, but the OP says he hooked up the gas line to his liquid QD and the gas is getting through fine. But I'm totally stumped on this one...unless something is blocking the pickup tube that moves when you push gas in, and gets sucked back when trying to get beer out....

 
Reply With Quote
Old 01-11-2010, 02:07 AM   #12
Dean_cox
Recipes 
 
Dec 2009
Wichita
Posts: 13

OK - thanks for all the help and advice. I decided today to rack the beer out into a fermenter and disassemble the Keg to see whats was wrong. Turns out that the O-Ring that sits between the tube (long curved tube) on the Liquid Out had spilt and seperated. I guess gas was mixing with the beer at the post as there was no seal! - I replaced the seal, and then cooled the keg down and put under pressure....today NO PROBLEM! perfect beer - Perfect carbonation - EXCELLENT! I feel so much better now.

Cheers!

Dean

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Liquid Ball lock disconnect will not attach to corny tannnick Bottling/Kegging 10 01-17-2010 03:19 AM
Corny disconnect problems pendragon Bottling/Kegging 4 12-14-2009 04:08 AM
liquid ball lock disconnect oring size Budzu Equipment/Sanitation 1 11-14-2009 10:51 PM
Corny keg blow off tube rig - on liquid out post? unclejimbay Equipment/Sanitation 5 04-27-2009 07:02 PM
disconnect stuck on corny hotammo Bottling/Kegging 5 02-17-2008 06:38 PM


Forum Jump