Coldbreak Brewing Giveaway - Open to All!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Anyone implement a tippy dump keggle?
Reply
 
Thread Tools
Old 01-03-2010, 10:54 PM   #1
Ryan_PA
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2006
Location: Horsham, PA, Pennsylvania
Posts: 1,915
Liked 9 Times on 7 Posts
Likes Given: 1

Default Anyone implement a tippy dump keggle?

I am planning a new brewstand and want to use at least one tippydump keggle. The concept would be using two posts out the sides of the keggle resting on/in two sockets. I am not sure if I should plan to just have the posts welded to the keg or if I am better off with another solution.

Does anyone have any detailed pics of this type of project and/or how the tippy dumps are locked in place during brewing?


Ryan_PA is offline
 
Reply With Quote
Old 01-03-2010, 10:59 PM   #2
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 3 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,700
Liked 1263 Times on 833 Posts
Likes Given: 34

Default

I had a hinged base design in mind for my stand but kegs don't dump so well due to the top skirt. I don't know who it was, but I do recall someone welded a chute between the cut top and the lip of the top skirt so spent grain didn't get caught up.

If it was going to pan out, I was going to hold the keg down to the hinged base with four bolts through the angle iron and into holes in the bottom skirt.


__________________
Welcome to BrewHardware.com. I love you.
New 100% Stainless Steel Heating Elements are IN! ULWD 5500w Ripple, 2000w, 1500w, etc
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.
July 4th Sale, $20 off plate chillers through July 4th.
Bobby_M is online now
 
Reply With Quote
Old 01-03-2010, 11:22 PM   #3
mplutodh1
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2006
Location: Sammamish, WA
Posts: 239
Liked 7 Times on 7 Posts

Default

Our design will have much the same idea as Bobby implemented. The Black Heart Brewery has it as well. Angle iron trays hinged and the keggles bolted to the trays. As Bobby notes, it won't be a perfect dump - because the kegs aren't the perfect pot for this stuff (they've got the upper skirt, a lip from the top of the keg, etc) - but it will make for easier grain removal and cleaning.

I tried to find the photo of a brewery build that I've seen on here - it incorporated a tipping keggle much like you've mentioned - but I believe the keggle was modified to have a chute. Probably the same build Bobby is thinking of.
mplutodh1 is offline
 
Reply With Quote
Old 01-04-2010, 01:36 AM   #4
Ryan_PA
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2006
Location: Horsham, PA, Pennsylvania
Posts: 1,915
Liked 9 Times on 7 Posts
Likes Given: 1

Default

Yeah Bobby, I know your design, I remember when you were sketching it up. I think to make the keggle work for the tippy dump, I need to employ the plasma cutter to remove the entire top skirt, and like you said, add a chute.

I like the idea of adding the pegs and pivot points since it will take much less force to dump than it would with the bottom mount design, not saying yours was not genius. If anyone has anything here, I would appreciate it, but I may just have to go off alone on this one...
Ryan_PA is offline
 
Reply With Quote
Old 01-04-2010, 03:01 AM   #5
cdburg
Feedback Score: 1 reviews
Recipes 
 
Join Date: Sep 2006
Location: Sacramento, CA
Posts: 358
Liked 7 Times on 5 Posts
Likes Given: 4

Default

I'm not using a converted keg, but I do have a tippy dump on my stand. I ended up fabricating a basket to hold the kettle. The pegs on the basket then sit in cradles on arms mounted to the stand.

The thread about my build is here:
http://www.homebrewtalk.com/f11/brut...69/#post763436

If you need specific pictures of anything, let me know. I can find one or take a new one.
cdburg is offline
 
Reply With Quote
Old 01-04-2010, 03:07 AM   #6
Ryan_PA
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2006
Location: Horsham, PA, Pennsylvania
Posts: 1,915
Liked 9 Times on 7 Posts
Likes Given: 1

Default

Beautiful, that is essentially what I am looking to do, but with a side dump rather than a front dump.
Ryan_PA is offline
 
Reply With Quote
Old 01-04-2010, 03:10 AM   #7
Yuri_Rage
Gritty.
HBT_MODERATOR.png
Feedback Score: 0 reviews
 
Yuri_Rage's Avatar
Recipes 
 
Join Date: Jul 2006
Location: Southwest
Posts: 14,141
Liked 699 Times on 445 Posts
Likes Given: 75

Default

Here's a good shot of my solution. A piece of 1/2" schedule 40 stainless pipe serves as the axle. You could do something very similar with a keg.

__________________
Homebrewed Blog..........YouTube Channel .......... Shirts, posters, etc
Yuri_Rage is offline
 
Reply With Quote
Old 01-04-2010, 03:12 AM   #8
Ryan_PA
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2006
Location: Horsham, PA, Pennsylvania
Posts: 1,915
Liked 9 Times on 7 Posts
Likes Given: 1

Default

Huh, I always imagined the posts being more to the middle of the keggle, but accross the bottom is a neat approach I did not consider. Thanks Yuri.
Ryan_PA is offline
 
Reply With Quote
Old 01-04-2010, 03:15 AM   #9
Yuri_Rage
Gritty.
HBT_MODERATOR.png
Feedback Score: 0 reviews
 
Yuri_Rage's Avatar
Recipes 
 
Join Date: Jul 2006
Location: Southwest
Posts: 14,141
Liked 699 Times on 445 Posts
Likes Given: 75

Default

You might even be able to run the axle straight through the skirt and have the keg rotate around a fixed axle.
__________________
Homebrewed Blog..........YouTube Channel .......... Shirts, posters, etc
Yuri_Rage is offline
 
Reply With Quote
Old 01-04-2010, 03:20 AM   #10
Ryan_PA
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2006
Location: Horsham, PA, Pennsylvania
Posts: 1,915
Liked 9 Times on 7 Posts
Likes Given: 1

Default

That is a hell of an idea. I could even use a long threaded rod as the axle. I never looked to see how much clearance there is between the bottom of the kettle and the skirt.


Ryan_PA is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tippy Dump on a Brutus Brickhouse Brew Stands 10 03-30-2009 01:36 AM
BGE: Greatest Cooking Implement? Aubie Stout Cooking & Pairing 4 07-24-2008 12:24 AM
designing my tippy dump Jim Karr Brew Stands 4 05-30-2008 02:26 PM
Tippy Dump? Yorg Equipment/Sanitation 1 03-07-2008 03:08 PM
Tippy MLT Plans? HenryHill Equipment/Sanitation 5 11-14-2007 10:49 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS