O - rings from McMaster - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > O - rings from McMaster

Reply
 
Thread Tools
Old 12-31-2009, 12:57 AM   #1
Southside
Recipes 
 
Nov 2009
Indianapolis
Posts: 34


I have the part number for all my kegging O-Rings and already have them. However I was trying to get replacement o-rings for my weldless fitting in my keggle.

Does anyone know if these would be it?

McMaster part nuumber is 9396K32

Thx for any input.

 
Reply With Quote
Old 12-31-2009, 02:03 AM   #2
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,335
Liked 1765 Times on 1122 Posts


You probably want a #209 if you stick with 1/8" profile. 1/2" thread is closer to 3/4" and you always want to undersize the oring a bit. If you step up to 3/16", you'd go #313.

Another great option is 99604A129
Silicone Sealing Washer 3/4" Screw Size, 1-1/2" OD, .093" Thick
In stock at $8.96 per Pack
__________________
Welcome to BrewHardware.com. I love you.
New Stirplates are IN!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 01-20-2010, 01:44 AM   #3
jtd_1
Recipes 
 
May 2008
Posts: 61

I just got these in the mail today, Thanks for the PN's!

Joe

 
Reply With Quote
Old 01-20-2010, 06:01 AM   #4
southpawbrew
 
southpawbrew's Avatar
Recipes 
 
Feb 2009
Cen Coast Cali
Posts: 140
Liked 2 Times on 2 Posts


Quote:
Originally Posted by Southside View Post
I have the part number for all my kegging O-Rings and already have them. However I was trying to get replacement o-rings for my weldless fitting in my keggle.

Does anyone know if these would be it?

McMaster part nuumber is 9396K32

Thx for any input.
I'm about to come into 9-10 pinlock kegs that will need to be refurbished. Would love those McMaster part #'s that you use for your kegging O-rings. Leads on what people have found as the cheapest source for pinlock rebuild kits would also be great.
__________________
Greg
SouthPaw Brewing Co.

"Stay with the beer. Beer is continuous blood. A continuous lover." Bukowski

 
Reply With Quote
Old 01-20-2010, 01:50 PM   #5
Boerderij_Kabouter
 
Boerderij_Kabouter's Avatar
Recipes 
 
Dec 2007
Oconomowoc, Wisconsin
Posts: 7,757
Liked 148 Times on 120 Posts


http://www.homebrewtalk.com/wiki/index.php/O-ring

 
Reply With Quote
Old 01-20-2010, 06:41 PM   #6
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,335
Liked 1765 Times on 1122 Posts


Do yourself a favor and get silicone rings for the lid #417 and posts #111. They're not that much more money but they are much nicer than the buna for staying soft in the cold.
__________________
Welcome to BrewHardware.com. I love you.
New Stirplates are IN!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 01-20-2010, 07:15 PM   #7
zimman
 
zimman's Avatar
Recipes 
 
Jan 2010
St. Louis, MO
Posts: 185
Liked 1 Times on 1 Posts


just ordered some. great service. next day delivery. sweet.
__________________
"Fermentation may have been a greater discovery than fire."

David Rains Wallace


Primary:
Secondary:
Kegged:
Bottled:
Kegged Soda:

 
Reply With Quote
Old 01-20-2010, 07:33 PM   #8
southpawbrew
 
southpawbrew's Avatar
Recipes 
 
Feb 2009
Cen Coast Cali
Posts: 140
Liked 2 Times on 2 Posts


Thanks for the reference to the wiki post and the push to silicon. I was just sitting here trying to decide and you're right not that much more $. One O-ring I can't find listed anywhere is on some of my lids the pressure release pull tab in the center. The removable screw type looks like this one: valve . I called midwest supplies and the list that the o-rings are replaceable but they don't sell the o-ring by itself.
__________________
Greg
SouthPaw Brewing Co.

"Stay with the beer. Beer is continuous blood. A continuous lover." Bukowski

 
Reply With Quote
Old 01-20-2010, 09:48 PM   #9
Southside
Recipes 
 
Nov 2009
Indianapolis
Posts: 34

Yeah I bought silicone for post rings, but got buna for keg lids and will get silicone the next time... I have had a couple start to leak after a few days in the fridge. I had to add some keg lube and seal with high pressure for a sec and then back it back down.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
McMaster Carr help wildwest450 Equipment/Sanitation 10 11-08-2009 06:08 PM
McMaster-Carr FTW. flyangler18 DIY Projects 31 02-27-2009 06:03 PM
About to order from mcmaster.... TXCrash Equipment/Sanitation 5 02-08-2009 06:43 PM
McMaster-Carr Rocks! mozicodo All Grain & Partial Mash Brewing 11 05-19-2007 04:03 AM
McMaster.com KUDOS Bobby_M Equipment/Sanitation 11 11-14-2006 12:19 AM


Forum Jump