looking for a welder. - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > looking for a welder.

Reply
 
Thread Tools
Old 12-29-2009, 04:09 PM   #1
beerlover69
Recipes 
 
Nov 2009
iowa
Posts: 20


I have 3 kegs that I need spigots welded. can someone recomend a good ss welder in the omaha area or sw iowa area. or what is peoples opinion on the weldless fittings.

 
Reply With Quote
Old 12-29-2009, 05:26 PM   #2
Bullka
Recipes 
 
Nov 2009
Springfield, Missouri
Posts: 38

I used weldless fittings on my 55 gallon SS drums and they worked great. You just have to make sure they get seated properly. I built mine all out of 3/4" SS material with a brass ball valve. It cost the same as if you were to order the 1/2" weldless setup. Here is a link if you want to build you own, but I would not go through the hassle unless you want a 3/4" connection.
http://www.antiochsudsuckers.com/tom...ssfittings.htm

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Welder purchase jeremysavoy DIY Projects 18 09-30-2009 05:41 PM
Moron Welder samc Brew Stands 16 07-12-2009 01:06 AM
Welder Help Aust1227 Brew Stands 17 04-21-2008 02:30 PM
Which welder to get? Grimsawyer DIY Projects 33 02-23-2008 08:42 AM
70 amp arc welder? Lounge Lizard Equipment/Sanitation 2 07-02-2006 10:13 PM


Forum Jump