So I think I want to start kegging... - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > So I think I want to start kegging...
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 12-08-2009, 07:42 PM   #1
nicadrick
Recipes 
 
Oct 2009
Oregon City, OR
Posts: 248



So I am brewing like a mad man, drinking at my regular pace and I find my self giving lots of brew away to friends and neighbors, etc.

This hole bottling thing is getting kind of old, sounds like I should start brewing larger batches that will enable me to keg the majority, and bottle some for portability, and aging, etc.

Here's my question is this: Do I need store my full kegs chilled? I can see having 2-4 taps eventually, but to start, likely just one or two.

Be gentle!



Reason: typo

 
Reply With Quote
Old 12-08-2009, 07:47 PM   #2
IrregularPulse
Hobby Collector
HBT_LIFETIMESUPPORTER.png
 
IrregularPulse's Avatar
Recipes 
 
Nov 2007
Posts: 49,690
Liked 3281 Times on 3153 Posts


Kegs can be stored at room temp. Just think of a keg as a big bottle. All the same applies except means of carbonation and pouring. Just rack to the keg, (instead of bottling bucket minus priming solution) Blast with 30psi to seal lid.
Now if you want it ready to serve you'll want it cold. Temperature will effect the psi required to carbonate it. I store them warm if I have a pipeline, then it take 1-2 weeks from the time I toss it in the keezer to when I hook up the beer out line and pull the tap.
You can keg with priming sugar just like bottles and store warm, then when you put it in the keezer it would have the co2 in the keg but will need a couple days still being cold to absorb the co2.


__________________
Tap Room Hobo

I should have stuck to four fingers in Vegas. :o - marubozo's mom


 
Reply With Quote
Old 12-08-2009, 07:53 PM   #3
mosquitocontrol
Recipes 
 
Sep 2008
Denver, CO
Posts: 1,081
Liked 9 Times on 9 Posts


If you prime the keg with sugar is it necessary to purge with co2?

 
Reply With Quote
Old 12-08-2009, 07:54 PM   #4
IrregularPulse
Hobby Collector
HBT_LIFETIMESUPPORTER.png
 
IrregularPulse's Avatar
Recipes 
 
Nov 2007
Posts: 49,690
Liked 3281 Times on 3153 Posts


You'll still want to because it will take quite a few days for the priming sugar to put off any co2 to seal the lid.
__________________
Tap Room Hobo

I should have stuck to four fingers in Vegas. :o - marubozo's mom

 
Reply With Quote
Old 12-08-2009, 07:55 PM   #5
Mountainbeers
Recipes 
 
Aug 2009
Morgantown, WV
Posts: 473

Quote:
Originally Posted by mosquitocontrol View Post
If you prime the keg with sugar is it necessary to purge with co2?
I have the same question. Seems like purging would be good to seal the lid but would this over carbonate?
__________________
Streamline Brewing Company
"You can't be a real country unless you have a beer and an airline - it helps if you have some kind of a football team or some nuclear weapons, but at the very least you need a beer." - Frank Zappa

On Deck: Apfelwein
Fermenting: Oatmeal Stout
Conditioning:
Drinking:

 
Reply With Quote
Old 12-08-2009, 07:58 PM   #6
mosquitocontrol
Recipes 
 
Sep 2008
Denver, CO
Posts: 1,081
Liked 9 Times on 9 Posts


Not to turn this into the kegging dumb question thread... but do you need disconnects on kegs when they are not hooked up to a line? Like just sealed and waiting?

 
Reply With Quote
Old 12-08-2009, 07:59 PM   #7
Clonefarmer
Recipes 
 
May 2008
Springfield, MA
Posts: 1,329
Liked 6 Times on 6 Posts


Quote:
Originally Posted by Mountainbeers View Post
I have the same question. Seems like purging would be good to seal the lid but would this over carbonate?
Purging at around 5 psi should be enough to seal the lid, but not over carbonate
__________________
"Just remember Scooty Puff Jr. sucks!"....Philip J. Fry

 
Reply With Quote
Old 12-08-2009, 08:00 PM   #8
Clonefarmer
Recipes 
 
May 2008
Springfield, MA
Posts: 1,329
Liked 6 Times on 6 Posts


Quote:
Originally Posted by mosquitocontrol View Post
Not to turn this into the kegging dumb question thread... but do you need disconnects on kegs when they are not hooked up to a line? Like just sealed and waiting?
Nope, the disconnects stay attached to the lines. When they are removed the keg remains sealed.


__________________
"Just remember Scooty Puff Jr. sucks!"....Philip J. Fry

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Want to start kegging but... jonbrout Beginners Beer Brewing Forum 21 03-29-2010 12:36 PM
Why did I start kegging?! rsmith179 Bottling/Kegging 7 06-14-2009 02:01 PM
I'm going to start kegging! Help! KingBrianI Bottling/Kegging 9 11-06-2008 09:59 PM
Start-up Kegging Kit illin8 Bottling/Kegging 6 06-05-2008 08:51 PM
I think I'm ready to start kegging HELP Bobby_M Bottling/Kegging 0 12-22-2006 05:31 PM


Forum Jump