Bought a march pump - need some fittings - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Bought a march pump - need some fittings

Reply
 
Thread Tools
Old 12-06-2009, 10:07 PM   #1
chefchris
 
chefchris's Avatar
Recipes 
 
Jul 2008
Gainesville, Florida
Posts: 1,713
Liked 21 Times on 21 Posts



Got a the march pump 809 coming in this week and hope to use it on Friday. I need the fittings for it and have no idea what to get. I also want some quick disconnects for it. I saw another post where someone listed the part numbers for the QD's, but I still need the valves for the pump. I used Flyguy's guide to build my mash tun. Link It uses a 3/8" ball valve on it.

Basically I need someone to say "Buy this this and this". I'm mechanically unenginered.

__________________
staygoldBREWING

I think you are confuisng circle k with a reach around. - Denny's Evil Concoctions

 
Reply With Quote
Old 12-06-2009, 11:03 PM   #2
chefchris
 
chefchris's Avatar
Recipes 
 
Jul 2008
Gainesville, Florida
Posts: 1,713
Liked 21 Times on 21 Posts


Basically here's my setup with the sizes of my ball valves. Thought maybe this would help. http:[email protected]/4164560994/

Also, I see some people with ball valves on both sides of the pump. Is this recommended or will 1 do?
__________________
staygoldBREWING

I think you are confuisng circle k with a reach around. - Denny's Evil Concoctions

 
Reply With Quote
Old 12-06-2009, 11:38 PM   #3
pdbreen
HBT_LIFETIMESUPPORTER.png
 
pdbreen's Avatar
Recipes 
 
Oct 2009
Mad River Valley, VT
Posts: 352
Liked 1 Times on 1 Posts


A valve on the inbound side is a bad idea - you risk running the pump unprimed. One on the outbound side is all you need.

For connections, I tried one of these for the connection into the whirlpool, but I had to drill them out (there was a cross bar inside) so the hops wouldn't clog.

These work well, but are overpriced and the o-rings are easy to lose. I'm sure McMaster has an equivalent - but I didn't do the search.
__________________
Atomic Dog Brewery

On Deck: Centennial IPA, Dry Irish Stout
P: Cascade Pale Ale
S: (nothing!)
K: (nothing!)
T: Carbed Crystal Light, Root Beer, Vanilla Cream Soda, Tripel IPA, Apfelwein

e^(pi*i) + 1 = 0

 
Reply With Quote
Old 12-07-2009, 12:34 AM   #4
passedpawn
Waste Allocation Load Lifter - Earth Class
HBT_ADMIN.png
 
passedpawn's Avatar
Recipes 
 
Apr 2009
☼ Clearwater, FL ☼
Posts: 26,538
Liked 7016 Times on 4153 Posts


Running the pump dry is fine, as long as it is not for 8 hours.

Here are the McMaster Carr QDs I use. You want to put the males on your pump (and the females on the tubing). Tubing is cheapest from Lowes (get the ribbed vinyl stuff) or Brewmaster's Warehouse if you want the good silicon stuff. The ID of the connectors below is 3/8", which is fine for me, but others have used connectors with a full 1/2" which gives them better flow rates. Me, I am completely happy with what I have.
__________________
- Andrew

 
Reply With Quote
Old 12-07-2009, 12:52 AM   #5
chefchris
 
chefchris's Avatar
Recipes 
 
Jul 2008
Gainesville, Florida
Posts: 1,713
Liked 21 Times on 21 Posts


Thanks! But what about the ball valves on my kettle and mash tun? One is 3/8" and the other is 1/2". What do I need for those?
__________________
staygoldBREWING

I think you are confuisng circle k with a reach around. - Denny's Evil Concoctions

 
Reply With Quote
Old 12-07-2009, 01:24 AM   #6
Reelale
Recipes 
 
Sep 2009
Posts: 17,765
Liked 1374 Times on 1332 Posts


I would replace the 3/8" ball valve with one of these http://www.greatbargain.net/order/shop2.html. He also has quality silicon hose. Great guy to work with and super fast-shipping. I just got my pump last week and built my keggle. I brewed yesterday and I think you'll want the 1/2" minimum for the pump.

 
Reply With Quote
Old 12-07-2009, 01:39 AM   #7
Jaybird
Sponsor
HBT_SPONSOR.png
 
Jaybird's Avatar
Recipes 
 
Jul 2006
Nor*Cal
Posts: 7,679
Liked 998 Times on 704 Posts


A stainless union on the inlet and a stainless union and a stainless ball valve on the outlet is all you need, if you are going to hard pipe it.
Cheers
Jay
__________________
Need a False Bottom for your Keg, Kettle or Cooler?

I have been making custom False Bottoms for just about everything since 2008

Nor Cal Brewing Solutions, Reddings local homebrew store
(530)243-BEER and (530)221-WINE


Still have questions PM me here or hit the website.

http://www.norcalbrewingsolutions.com and like us on Facebook https://www.facebook.com/NorCalBrewingSolutionsfor Facebook only promos too
Smoke Cigars? www.stogietoys.com

*Member: The HBT Sweaty Fat Guy Cigar Club

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
How high can a March Pump--pump? jlosbor Equipment/Sanitation 18 07-02-2010 03:13 PM
March Pump Fittings hukdizzle Equipment/Sanitation 15 06-24-2009 07:11 PM
Whirlpool IC (with new stainless fittings) and Toolbox March Pump (pics) Evan! Home Brewing Photo Forum 34 03-26-2009 07:34 PM
What fittings are used with the March Pump? wedge421 Equipment/Sanitation 11 05-09-2008 07:23 PM
Pump fittings... aekdbbop Equipment/Sanitation 21 04-07-2008 08:45 PM


Forum Jump