Spike Brewing Giveaway - New v3 Kettle

Home Brew Forums > Home Brew Market > For Sale > For Sale - WTB: Mash conversion kit for 5 gal Rubbbermaid Cooler
Reply
 
Thread Tools
Old 12-05-2009, 12:20 AM   #1
msa8967
mickaweapon
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
msa8967's Avatar
Recipes 
 
Join Date: May 2009
Location: North Liberty, Iowa
Posts: 2,809
iTrader: (0)
Liked 95 Times on 78 Posts
Likes Given: 102

Default For Sale - WTB: Mash conversion kit for 5 gal Rubbbermaid Cooler

Anyone have a conversion kit for a 5 gallon rubbermaid cooler? I am looking into wanting to start partial mash brewing with going into all grain brewing down the road. Thought I would see if anyone had a used set before buying online. If you don't have a set to sell but can recommend a set online for me to look at or have advice on where to look that would be appreciated. The closest LHBS is about 2 hours away.

Thanks,

mick


__________________
Mick Arnett
North Liberty, Iowa
"Beer will change the world. I don't know how, but it will."
msa8967 is offline
 
Reply With Quote
Old 12-05-2009, 12:25 AM   #2
CrazyJames
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2009
Location: Calgary, AB Canada
Posts: 89
iTrader: (0)
Default

I'd take a look at this thread, and print out the parts list.

Then head to your local hardware store.

http://www.homebrewtalk.com/f51/chea...version-23008/


CrazyJames is offline
 
Reply With Quote
Old 12-05-2009, 02:02 PM   #3
msa8967
mickaweapon
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
msa8967's Avatar
Recipes 
 
Join Date: May 2009
Location: North Liberty, Iowa
Posts: 2,809
iTrader: (0)
Liked 95 Times on 78 Posts
Likes Given: 102

Default

Are there any final recommendations to the parts list for this conversion kit? Reading through the long list of replies for this assembly I noted at least a dozen different recommendations on materials to buy and thus I am not sure if the initial listing of materials is still the best way to go.

Thanks...

Mick
__________________
Mick Arnett
North Liberty, Iowa
"Beer will change the world. I don't know how, but it will."
msa8967 is offline
 
Reply With Quote
Old 12-05-2009, 03:11 PM   #4
CrazyJames
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2009
Location: Calgary, AB Canada
Posts: 89
iTrader: (0)
Default

Mick:

I used pretty much his initial list and have not ran into a problem yet.

The only modifications I made was to make sure to find stainless steel worm clamps, and I did not use any tubing in my braid. Havent had any problems yet.
CrazyJames is offline
 
Reply With Quote
Reply

Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ten minute cooler mash tun conversion wilserbrewer Equipment/Sanitation 23 Yesterday 07:21 PM
Cooler Mash tun Conversion Question QUICK! daryk77 All Grain & Partial Mash Brewing 2 02-22-2009 09:19 PM
First mash with new cooler conversion have problem. MikeInCtown All Grain & Partial Mash Brewing 8 10-06-2008 01:45 AM
Cooler mash tun conversion Q. Willsellout Equipment/Sanitation 7 02-01-2007 05:06 PM
Extreme cooler hacking: heated cooler mash vessel ? brewman ! Equipment/Sanitation 10 12-16-2006 03:23 AM


Forum Jump