Just another diy stir plate - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > DIY Projects > Chillers & Stir Plates > Just another diy stir plate

Reply
 
Thread Tools
Old 11-27-2009, 11:41 PM   #1
Sounds
Recipes 
 
Oct 2009
Fairfax, VA
Posts: 51
Liked 3 Times on 2 Posts



http://picasaweb.google.com/soundspi...eat=directlink

$16 at radioshack is what it ran me, had everything else.

I was having problems with the stir bar being thrown off after a while. I had originally glued the magnets right to the pvc pipe. I tore them off and glued a washer on the pvc then glued the magnets to the washer. works awesome now, i can actually move the flask around on the plate and the bar wont get thrown off. the power supply i'm using actually goes up to 14v and the bar still can hold on with it turned all the way up Just thought I'd share my experience as I had seen others complaining about the stir bar being thrown off.

Sorry, for the low quality pics, my phone took them...

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to use a Stir Plate ShortSnoutBrewing Equipment/Sanitation 42 08-08-2016 01:41 PM
What Magnets/Stir Bar do you use for your Stir Plate? Stevorino Equipment/Sanitation 28 10-04-2013 05:32 PM
Stir plate insnekamkze86 Beginners Beer Brewing Forum 7 10-01-2009 07:10 PM
Need DIY stir plate help NewBrew75 Equipment/Sanitation 2 01-07-2009 03:52 AM
Stir plate help polarbearbrewing Chillers & Stir Plates 2 07-21-2008 03:39 AM


Forum Jump