Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Blowoff tube for Better Bottle?
Reply
 
Thread Tools
Old 11-23-2009, 06:06 PM   #1
hoppysailor
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2009
Location: Montana
Posts: 135
Liked 1 Times on 1 Posts
Likes Given: 1

Default Blowoff tube for Better Bottle?

We just got a couple of 6 gallon better bottles and put them to work Saturday as fermenters. I rigged blowoff tubes using #10 drilled stoppers with tubing inserted in the holes. One of the batches had some crazy thick blowoff that wouldn't go through the small diameter tubing and pushed the stopper out repeatedly. I ended up just letting the blowoff ooze out of the fermenter for most of the day yesterday and was able to get the stopper to stay in last night. The question is, "what have you done to rig a larger diameter blowoff tube for your better bottles?".


__________________
Mountain View Brewery


hoppysailor is offline
 
Reply With Quote
Old 11-23-2009, 06:11 PM   #2
thirdedition
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2009
Location: Cincinnati
Posts: 66
Default

I bought about 3 feet of 1 3/4 inch outer diameter tube that fits pretty snug in the bottle. I then tape it up so make it air tight. So far it hasn't cause any problems for me.


__________________
My adventures in homebrewing
thirdedition is offline
 
Reply With Quote
Old 11-23-2009, 06:15 PM   #3
pdbreen
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
pdbreen's Avatar
Recipes 
 
Join Date: Oct 2009
Location: Mad River Valley, VT
Posts: 355
Liked 1 Times on 1 Posts

Default

Fermcap does the trick. Also, I've found you really need to push the bungs into the better bottles (leaving about 1/8 - 1/4 inch between the neck and the lip on the bung). Otherwise, they like to ride up - lubricated by the StarSan.
__________________
Atomic Dog Brewery

On Deck: Centennial IPA, Dry Irish Stout
P: Cascade Pale Ale
S: (nothing!)
K: (nothing!)
T: Carbed Crystal Light, Root Beer, Vanilla Cream Soda, Tripel IPA, Apfelwein

e^(pi*i) + 1 = 0
pdbreen is offline
 
Reply With Quote
Old 11-23-2009, 06:17 PM   #4
hoppysailor
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2009
Location: Montana
Posts: 135
Liked 1 Times on 1 Posts
Likes Given: 1

Default

I think I'm glad I didn't have the stopper jammed tight. The resulting explosion would have been worthy of a photo expose.
__________________
Mountain View Brewery


hoppysailor is offline
 
Reply With Quote
Old 11-23-2009, 06:36 PM   #5
raceskier
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2007
Location: Port Townsend, Washington
Posts: 607
Liked 1 Times on 1 Posts

Default

I have not tried a bung, but had no luck with the orange carboy caps. I now use the BB standard closure with the small o-ring and a 1/2 inch OD tube. That does the trick for me. No issues at all.
__________________
Primary: , Boddington's Clone, Mirror Pond w/Marris Otter
Secondary:
Bottled: Fullers ESB Clone
Kegged: Mirror Pond Clone
Drinking: BM's Kona Fire Rock, Dead Guy Clone, Alaskan Amber Alt Clone, Firestone DBA Clone, Magnum/Crystal IPA
Next up: Burton IPA
raceskier is offline
 
Reply With Quote
Old 11-23-2009, 07:37 PM   #6
Montanaandy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2009
Location: Montana
Posts: 1,016
Liked 19 Times on 14 Posts
Likes Given: 77

Default

I have used the #10 stoppers on my 6 gal. BB without incident. I also use the universal bung and have not had any problem but the #10 seems much more sturdy so I am a bit surprised to hear that you had trouble with it. I just plug the 3 piece airlock (minus the interior and exterior caps) into the stopper/bung and connect the tubing down the length of the airlock post. The other end of the tubing goes into a growler filled 1/2 - 3/4 with Star San and wrapped in saran wrap. I change out the Star San/Growlers when the solution gets gunky/murky. Has worked like a charm thus far and I have had some wicked blow off from some batches. Montanaandy
Montanaandy is offline
 
Reply With Quote
Old 11-23-2009, 07:58 PM   #7
hoppysailor
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2009
Location: Montana
Posts: 135
Liked 1 Times on 1 Posts
Likes Given: 1

Default

Montanaandy - I tried sending you a PM but your mailbox is full. Where in Montana are you?
__________________
Mountain View Brewery


hoppysailor is offline
 
Reply With Quote
Old 11-23-2009, 07:59 PM   #8
wrestler63
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2009
Location: Michigan
Posts: 173
Default

Quote:
Originally Posted by thirdedition View Post
I bought about 3 feet of 1 3/4 inch outer diameter tube that fits pretty snug in the bottle. I then tape it up so make it air tight. So far it hasn't cause any problems for me.
+1......thats what i use with great results
wrestler63 is offline
 
Reply With Quote
Old 11-23-2009, 08:03 PM   #9
nostalgia
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2008
Location: Port Murray, NJ
Posts: 2,408
Liked 69 Times on 47 Posts
Likes Given: 9

Default

The orange caps are a little loose, but a quick round of plastic wrap fixes that. Alternately, the red caps are a good, snug fit if you can find them. I got some purple ones from AHS that were supposed to be specifically for Better Bottles but they're not even close so they just collect dust.

You can get a 1/2" ID hose over any of them. I usually cut the tip of the cap back a bit to expose the full diameter opening, since they do neck in a little.

Here is my orange cap with blowoff in action and red cap with airlock on my two BBs.



-Joe
__________________
I'm opening a brewery! Man Skirt Brewing

Progress is always up on my Facebook page
nostalgia is offline
 
Reply With Quote
Old 11-23-2009, 08:23 PM   #10
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 4 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,749
Liked 1299 Times on 853 Posts
Likes Given: 35

Default

Joe's picture is my standard method also. My caps fit pretty snug so I don't have to do anything special.


__________________
Welcome to BrewHardware.com. I love you.
New 100% Stainless Steel Heating Elements are IN! ULWD 5500w Ripple, 2000w, 1500w, etc
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.
Bobby_M is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Do I need to use blowoff tube? SevenFields Beginners Beer Brewing Forum 3 06-07-2009 10:11 PM
Better bottle blowoff tube? Aleforge Equipment/Sanitation 7 11-13-2008 04:22 PM
Do I need a blowoff tube? shecky Extract Brewing 2 05-27-2008 05:12 PM
Sealing a Better Bottle and Airlock vs. Blowoff Tube Boston Brewer Beginners Beer Brewing Forum 8 10-19-2007 10:37 AM
No Blowoff Tube Somerville General Techniques 8 07-25-2006 10:47 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS