Kegerator Help - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Kegerator Help

Reply
 
Thread Tools
Old 11-15-2009, 11:37 AM   #1
nepats52
Recipes 
 
Jul 2009
MA
Posts: 20


I just purchased a Kegerator Conversion Kit with dual perlick faucets from KegConnection. I'm trying to convert my Magic Chef model # CTB1722GR refrigerator. Here's the questions I have:

Can I drill through the sidewall for the dual taps? I have looked online and there really isn't a good parts diagram that I could find. I just don't want to hit a coolant line.

If I have to go through the door what size beer lines do most people use? I have only 5 foot lines right now.

Thanks for your help.

 
Reply With Quote
Old 11-15-2009, 03:52 PM   #2
limoges
 
limoges's Avatar
Recipes 
 
Oct 2008
Posts: 58

If this is a full size fridge they usually put the lines in the back. If a bar fridge they are on the sides and possibly on the top also.

You should be able to feel the heat from touching the sides/top/back. If hot then there are some line there somewhere...

Don't know if this helps but here:

http://www.appliancepartspros.com/pa...650814#d650814

it shows the condenser being a weird triangle.

 
Reply With Quote
Old 11-15-2009, 04:50 PM   #3
nepats52
Recipes 
 
Jul 2009
MA
Posts: 20

Thanks, It's an 18.4 cu ft. unit. I think the actual refrigerator part is 16.4 cu ft. I saw that diagram before. It doesn't really show where the lines run.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Convert Conventional Kegerator to Cornelius Kegerator aschafer324 Bottling/Kegging 3 07-23-2009 10:12 PM
kegerator FEARDIZ Kegerators & Keezers 4 08-02-2008 04:22 AM
Where is your Kegerator? Skins_Brew General Chit Chat 41 08-01-2008 10:36 PM
Ease of Going from Sanke Kegerator to Homebrew Kegerator polamalu43 Bottling/Kegging 6 04-28-2008 10:52 PM
4 tap kegerator BeHoppy Bottling/Kegging 1 01-23-2007 06:07 PM


Forum Jump