Blichmann Boilermaker sight glass - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Blichmann Boilermaker sight glass
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 11-09-2009, 04:25 PM   #1
SpanishCastleAle
Recipes 
 
Jan 2009
Central Florida
Posts: 4,338
Liked 36 Times on 36 Posts



I kmow there have been threads and I've read some but I'm still unsure.

I won some monies so I'm gonna get a nice brew kettle. I like the Blichmann except I'm concerned about the sight glass. If the sight glass ever breaks or leaks one drop, evar!, I'll be sorry I got it. It's just too easy to stick a dowel down in a pot to measure volume those couple of times I need to measure volume and there's nothing to clean ('cept a dowel).

How easy/hard is it to clean the sight glass?
Are you glad the sight glass is there or do you think it would be easier and simpler to just do away with it and use a dowel (or equal)?

There also have been complaints that the dip tube attachment for keeping hops/trub out of the fermenter clogs frequently. Is that true or is that more of a 'pilot error' thing?

I only know of the Blichmann, Sabco kegs (which I don't want), and Megapots. Any other contenders? I think I like the false bottom design of the Blichmann better than the Megapot. I also like the build of the Morebeer kettles but they have stupid volumes for their pots imo. It MUST be 10 gallon...an 8 gallon kettle is a mistake I won't make again.


__________________
Early brewers were primarily women, mostly because it was deemed a woman's job. Mesopotamian men, of some 3,800 years ago, were obviously complete assclowns and had yet to realize the pleasure of brewing beer.- Beer Advocate

 
Reply With Quote
Old 11-10-2009, 01:31 AM   #2
Brewers Hardware
Sponsor
HBT_SPONSOR.png
Recipes 
 
Dec 2008
Huntington Beach, CA, 92649
Posts: 454
Liked 7 Times on 6 Posts


I have one I use as a MLT. It does not leak a drop and I just flush it with a hose and all is good. It actually has an allen plug in the top that can be removed and comes with a brush.

For a MLT, however, I have a problem with it sucking air while I'm pumping when it's a low gravity beer.



 
Reply With Quote
Old 11-10-2009, 01:40 AM   #3
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 22,986
Liked 1587 Times on 1024 Posts


After one brew with a sight glass, you'll wonder how you ever got by with a dowel. Shoot the hose water into the glass and it's clean. It looks like the BM glass is well protected so it would have to be a catastrophe to make it break.
__________________
Welcome to BrewHardware.com. I love you.
BIAB Large Mesh False Bottoms and SS HERMS COILS are IN!!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 11-10-2009, 01:11 PM   #4
SpanishCastleAle
Recipes 
 
Jan 2009
Central Florida
Posts: 4,338
Liked 36 Times on 36 Posts


Thanks for the responses. Sometimes I'm too much of a slave to the KISS rule and always trying to keep things as simple as possible. Simplicity is really the only reason I'm getting a new kettle...sick of dicking around with the last gallon or so of wort preboil (my preboil volume is often right at 8 gal so an 8 gal kettle is a PITA). Similar 'capacity' problems with my Zapap lauter tun, just a bit too small sometimes.
__________________
Early brewers were primarily women, mostly because it was deemed a woman's job. Mesopotamian men, of some 3,800 years ago, were obviously complete assclowns and had yet to realize the pleasure of brewing beer.- Beer Advocate

 
Reply With Quote
Old 11-10-2009, 01:25 PM   #5
pdbreen
HBT_LIFETIMESUPPORTER.png
 
pdbreen's Avatar
Recipes 
 
Oct 2009
Mad River Valley, VT
Posts: 344
Liked 1 Times on 1 Posts


I've been using a Blichmann 15gal pot for the boil. As another poster said, it comes with an allen wrench and brush, so cleanout is a breeze. I didn't bother with the dip tube attachment because I read mixed reviews as well. The base of the pot is stepped with the dip tube coming down on the upper portion of the step, so a decent whirlpool gets most of the trub to settle in the center and I'm not too concerned with a bit of pellets/trub entering the primary. And, when doing a highly hopped beer, I'll also bag some of the pellets.

Only minor issues are that site glass on the 15gal pot starts at around 3 gallons, so it doesn't really help in telling you how much you drew off from your 1st runnings. Also, the thermometer is at about the 7gal line which basically makes it a nice way to figure out when you have enough volume for the boil, but is useless otherwise (would be nice if I didn't have to drop another thermometer in during the chill). These are only issues with 5gal batches - having the flexibility to do a 10gal batch is still worth it to me.
__________________
Atomic Dog Brewery

On Deck: Centennial IPA, Dry Irish Stout
P: Cascade Pale Ale
S: (nothing!)
K: (nothing!)
T: Carbed Crystal Light, Root Beer, Vanilla Cream Soda, Tripel IPA, Apfelwein

e^(pi*i) + 1 = 0

 
Reply With Quote
Old 11-10-2009, 01:57 PM   #6
SpanishCastleAle
Recipes 
 
Jan 2009
Central Florida
Posts: 4,338
Liked 36 Times on 36 Posts


How old is your boilermaker pdbreen? I had read similar complaints about the thermometer being mounted too high but the photos on their site look like it's mounted relatively low. Did they change the design and lower it at some point?

I don't measure temp during the chill but it would be a shame to not be able to use that feature. But I'm getting the 10 gal. model for ~5.5-6 gal batches so it shouldn't be an issue anyway.

The font on their site is unreadable and hurts your eyes to even try. They should fix that. EDIT: looks like they did, last night it was all a mess.
__________________
Early brewers were primarily women, mostly because it was deemed a woman's job. Mesopotamian men, of some 3,800 years ago, were obviously complete assclowns and had yet to realize the pleasure of brewing beer.- Beer Advocate

 
Reply With Quote
Old 11-10-2009, 02:34 PM   #7
pdbreen
HBT_LIFETIMESUPPORTER.png
 
pdbreen's Avatar
Recipes 
 
Oct 2009
Mad River Valley, VT
Posts: 344
Liked 1 Times on 1 Posts


Quote:
Originally Posted by SpanishCastleAle View Post
How old is your boilermaker pdbreen? I had read similar complaints about the thermometer being mounted too high but the photos on their site look like it's mounted relatively low. Did they change the design and lower it at some point?
It's from early Oct so I would expect this is current design. I knew it would be at aroung the 7gal mark when purchasing. It was a trade-off - optimize for 5gal w/the 10gal pot or compromise and allow for an occasional 10gal batch w/the 15gal pot.


__________________
Atomic Dog Brewery

On Deck: Centennial IPA, Dry Irish Stout
P: Cascade Pale Ale
S: (nothing!)
K: (nothing!)
T: Carbed Crystal Light, Root Beer, Vanilla Cream Soda, Tripel IPA, Apfelwein

e^(pi*i) + 1 = 0

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Blichmann Boilermaker Reviews MNBugeater Equipment/Sanitation 97 09-08-2011 04:53 PM
Question about Blichmann Boilermaker zman Equipment/Sanitation 3 09-23-2009 09:36 PM
Blichmann Boilermaker 10g setup: 15g HLT, MLT and 20g BK Gordie For Sale 2 08-23-2009 05:53 AM


Forum Jump