Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Beverage Air BM23 condensation
Reply
 
Thread Tools
Old 10-25-2009, 01:45 PM   #1
jeremysavoy
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
jeremysavoy's Avatar
Recipes 
 
Join Date: Sep 2009
Location: Raleigh, NC
Posts: 73
Default Beverage Air BM23 condensation

I picked up an older BM23 this weekend, it gets very cold but it produces quite a lot of condensation inside the cabinet, enough to leave about 1/4" of water on the floor. The water drains out and runs all over my garage.

I realize there is a drain hole and I can put a drain pan underneath, but I'm just wondering if this much condensation is normal? Emptying a drain pan a few times a week is not ideal ... and it also prevents me from putting this unit in the house because if I forget to empty it I will ruin maple hardwoods.

Just wondering if this is normal, and if there is anything I can do to reduce the amount of condensation?

thanks,
Jeremy



jeremysavoy is offline
 
Reply With Quote
Old 10-25-2009, 10:37 PM   #2
jeremysavoy
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
jeremysavoy's Avatar
Recipes 
 
Join Date: Sep 2009
Location: Raleigh, NC
Posts: 73
Default

Ok, so the condensation is being caused by a bad door gasket along with a bent door that does not come close to sealing in the lower left hand corner.
jeremysavoy is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
External CO2 Tank with Beverage-Air BM23 Kegerator mattreba Kegerators and Keezers 5 03-04-2014 04:45 AM
Superior/Bev Air BM23 repair RoseHawke Bottling/Kegging 0 04-27-2008 03:05 PM
Condensation Issues kilroy Bottling/Kegging 4 09-24-2007 03:46 PM
fridge and condensation Ken Powell Equipment/Sanitation 6 08-28-2007 10:21 AM
Criagslist, Very nice Bm23 Bev-Air kegerator OneHotKarl Bottling/Kegging 2 08-02-2007 07:09 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS