Coleman Xtreme Drain Assembly - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Coleman Xtreme Drain Assembly

Thread Tools
Old 10-22-2009, 05:58 PM   #1
CereousBrewer's Avatar
Mar 2009
Rim Country Arizona
Posts: 65

Just an FYI, when I converted my 70 qt Xtreme to a mash tun I utilized part of the drain assebly in attaching the copper/brass fittings and could foresee a problem with the bushing getting damaged over time.

I called Coleman to see if replacement drain assemblies were available and indeed they are, for $2.50 each. Since shipping was $3, I ordered three and they arrived in just a few days. In case anyone is interested, it's part number 6263-5071.

Reply With Quote
Old 10-22-2009, 10:23 PM   #2
EvilTOJ's Avatar
Dec 2005
Portland, OR, Oregon
Posts: 6,401
Liked 50 Times on 35 Posts

Awesome, thanks for that! I could have used it when I built my first mash tun and fauked up the nozzle hole.
There is a very fine line between "hobby" and "mental illness."

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Who here uses coleman xtreme cooler for a MLT? BeerPressure All Grain & Partial Mash Brewing 20 04-18-2010 04:58 AM
Coleman Xtreme too much? quixand Kettles, Mash Tuns & Hot Liquor Tanks 20 10-14-2009 09:02 PM
Converting Coleman Xtreme 70qt to MLT thehand Kettles, Mash Tuns & Hot Liquor Tanks 30 09-17-2009 08:12 PM
70 qt Coleman Xtreme & efficiencies illin8 Equipment/Sanitation 2 04-21-2009 06:30 PM
Manifold for 70qt Coleman Xtreme janzik Equipment/Sanitation 18 01-06-2008 04:03 PM

Forum Jump