Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Mounting Tray for Bar Products Drip Tray...
Reply
 
Thread Tools
Old 10-15-2009, 08:03 PM   #1
chuggs
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2009
Location: Jupiter, FL
Posts: 323
Liked 11 Times on 10 Posts

Default Mounting Tray for Bar Products Drip Tray...

I bought a couple of the Stainless Steel drip trays that www.barproducts.com carries (DTS-419, $14.95) and just couldn't find time to mount one to my kegerator. Finally, I broke down and picked up some 1" aluminum angle from Home Depot...and fashioned one out of that. It holds the tray out 1" from the kegerator...so that it doesn't miss the drips from the Perlicks & Stout Faucet.





I can pop the whole tray out to wash it. Don't know if I'm going to plumb it to a catch bottle. Probably not.

Sure beats putting paper towels down on the garage floor to catch drips


chuggs is offline
 
Reply With Quote
Old 10-15-2009, 08:20 PM   #2
lamarguy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Location: Austin, TX
Posts: 1,657
Liked 24 Times on 23 Posts
Likes Given: 1

Default

Look good!

I considered fabricating a mounting bracket like that but ended up just buying a drip tray with a backsplash.



__________________
Doggfather Brewery

Planned: Lambic, American IPA
Fermenting: 6 gals of 1.090 stout (Belgian) & 6 gals of 1.090 stout (English)
Tapped: Berliner Weisse, Black English IPA, German Pils, & Live Oak Primus
lamarguy is offline
 
Reply With Quote
Old 10-15-2009, 08:55 PM   #3
chuggs
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2009
Location: Jupiter, FL
Posts: 323
Liked 11 Times on 10 Posts

Default

The back splash trays are really nice.

I had already put my shanks in...and I never consulted specs to see what spacing the backsplash drip trays use.

If I only knew then --- what I know now

Hey...3 ft of 51/6 ID drain hose. That's pretty big, eh? I guess keg connection might have a slight typo on that...

It was kinda nice to mock it up myself. I made sure that I had enough room for a tall pilsner glass under the perlick & regular beer faucets... And made sure that a Nonic would fit under the Stout Faucet. Then double checked to make sure my Pitchers fit too... I'm amazed at how much time you can kill just making a simple drip tray holder...kinda funny.

chuggs is offline
 
Reply With Quote
Old 10-15-2009, 09:11 PM   #4
lamarguy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Location: Austin, TX
Posts: 1,657
Liked 24 Times on 23 Posts
Likes Given: 1

Default

Quote:
Originally Posted by chuggs View Post
Hey...3 ft of 51/6 ID drain hose. That's pretty big, eh? I guess keg connection might have a slight typo on that...
Ha....No, seriously, the drain is that big!
__________________
Doggfather Brewery

Planned: Lambic, American IPA
Fermenting: 6 gals of 1.090 stout (Belgian) & 6 gals of 1.090 stout (English)
Tapped: Berliner Weisse, Black English IPA, German Pils, & Live Oak Primus
lamarguy is offline
 
Reply With Quote
Old 10-15-2009, 10:57 PM   #5
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 3 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,616
Liked 1235 Times on 814 Posts
Likes Given: 33

Default

I just velcro'd the tray on top of two angle brackets that I epoxied to the keezer. No making anything.
__________________
Welcome to BrewHardware.com. I love you.
New 100% Stainless Steel Heating Elements are IN! ULWD 5500w Ripple, 2000w, 1500w, etc
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.
Bobby_M is offline
 
Reply With Quote
Old 10-16-2009, 01:33 PM   #6
bentonre
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2008
Location: Allentown, PA
Posts: 169
Liked 1 Times on 1 Posts

Default

I bought a couple angle brackets as well, but I bought mine a little wider than the tray and bent the end up. Holds the tray nicely and lifts out easily. (I could just see myself with the velcro, I'd be wearing whatever was in the tray when I went to pop it off!)
bentonre is offline
cwmagui Likes This 
Reply With Quote
Old 12-29-2009, 03:17 AM   #7
jpickard7125
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2009
Location: Connecticut
Posts: 1
Default

Anyone seen a drip tray similar to the Plastic/Stainless Counter Top Drip Tray at the bottom of this page? I recently bought a kegerator but it came with an awful drip tray, I've seen other kegerators that have drip trays like this that come with the kegerator, but haven't been able to find anything similar I can buy separate.

http://www.kegking.com.au/drip%20trays.html


jpickard7125 is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
DIY Drip tray, Recessed sjlammer Kegerators and Keezers 20 09-13-2013 07:05 PM
help building a DIY Drip tray hopsoda Kegerators and Keezers 37 12-25-2011 03:25 PM
Cheap DIY drip tray - <$4 Foamenter Kegerators and Keezers 5 11-03-2009 06:42 PM
drip tray farrout Kegerators and Keezers 2 04-01-2009 05:38 AM
New Drip Tray BierMuncher Bottling/Kegging 13 04-11-2008 08:14 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS