Dark wort from all base malt? - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Dark wort from all base malt?

Reply
 
Thread Tools
Old 10-12-2009, 02:40 PM   #1
chrisedjohn
Recipes 
 
Oct 2009
Milwaukee
Posts: 30
Liked 1 Times on 1 Posts



Just brewed a 6 gal batch last night using all base malt (8 lb of 2-row and 2 lb of 6-row). This is my second all-grain attempt. It's experiemental - I'd like to know the flavor that comes from just the base malt (1.050 OG) and moderate hopping (30 IBU). The wort is much darker than I anticipated (it being all base malt and all). My guess is that this could be from all the extra aggitation the mash gets since I'm mashing in a big pot on the stove and mixing it quite frequently (churning it ever 5-10 minutes or so). I did not notice anything caramelized or charred on the bottom at all. I started and 120 and slowly brought it up to a low saccrification rest at 145 for 90 minutes before moving it up slowly again to 160, then sparging with a spray arm.

When I stopped sparging after about 2 gal, the SG at about 1.010, the color was light yellow - what I expected. But everything mixed together, the first running made it very brown/amber. I did recirculate the first gallon or so of runnings to clear it out - though it wasn't anything near "clear" just clearer than it started. Lots of what I'm guessing are protein chunks/bits that are in the boil (after that long and those temps, I can't imagine I still have starch?

Now in a carboy. Small bubbles this morning already. An inch or so of crud on the bottom. Still fairly dark in color. Anybody know what could make it so dark with only all-grain base malt? Color from the hulls?

 
Reply With Quote
Old 10-12-2009, 03:20 PM   #2
david_42
 
david_42's Avatar
Recipes 
 
Oct 2005
Oak Grove, Oregon, USA
Posts: 25,595
Liked 152 Times on 143 Posts


Since you have so much trub already, I'd go with a combination of hulls and caramelization during the boil.
__________________
Remember one unassailable statistic, as explained by the late, great George Carlin: "Just think of how stupid the average person is, and then realize half of them are even stupider!"

"I would like to die on Mars, just not on impact." Elon Musk

 
Reply With Quote
Old 10-12-2009, 03:33 PM   #3
lamarguy
 
lamarguy's Avatar
Recipes 
 
Aug 2008
Austin, TX
Posts: 1,653
Liked 25 Times on 24 Posts


My money is on hard water (high bicarbonate ppm). What are the numbers from your water report?
__________________
Doggfather Brewery

Planned: Lambic, American IPA
Fermenting: 6 gals of 1.090 stout (Belgian) & 6 gals of 1.090 stout (English)
Tapped: Berliner Weisse, Black English IPA, German Pils, & Live Oak Primus

 
Reply With Quote
Old 10-12-2009, 04:20 PM   #4
chrisedjohn
Recipes 
 
Oct 2009
Milwaukee
Posts: 30
Liked 1 Times on 1 Posts


Quote:
Originally Posted by lamarguy View Post
My money is on hard water (high bicarbonate ppm). What are the numbers from your water report?
It's a 12 page report. Not sure what numbers exatly, but here's some that relate to hardness:

ALLOWABLE
CONCENTRATION MAXIMUM MINIMUM MEDIAN
(MCL, mg/L) (mg/L) (mg/L) (mg/L)
Chemical & Physical Parameters
Alkalinity, as CaCO3 ' NR 130 94 99
Carbon dioxide, free (calculated) NR 12.39 3.92 5.8
Conductivity, uS/cm NR 335 254 294
Hardness, Total, as CaCO3 NR 187 130 135
Hardness, Calcium, as CaCO3 NR 123 86 93
Hardness, Magnesium, as CaCO3 NR 64 14 44
Odor (Threshold Odor Number) ' 3 1 1 1
pH ' 6.5-8.5 7.8 7.09 7.51
Saturation Index (calculated) NR -0.22 -0.67 -0.51
Specific UV absorbance, mg/m-L, calc. NR 1.4 0.4 1.1
Temperature, degrees Celsius ' NR 21.7 1.1 8.9
Total Dissolved Solids (TDS) calc. 500 267 151 178
Total Solids NR 180 150 165
Total Suspended Solids NR <10 <10 <10
Total Organic Carbon NR 3.2 1.1 1.3
UV-254 (cm-1) NR 0.017 0.011 0.014

Any of those numbers relate to your question?

 
Reply With Quote
Old 10-12-2009, 04:32 PM   #5
lamarguy
 
lamarguy's Avatar
Recipes 
 
Aug 2008
Austin, TX
Posts: 1,653
Liked 25 Times on 24 Posts


Yup, plugging the numbers into Palmer's spreadsheet results in:

Est. SRM (Low): 11
Est. SRM (High): 16
Chloride to Sulfate Ratio: Very Bitter

You should seriously consider using RO water and/or treating your tap water when brewing anything under an SRM of 11.
__________________
Doggfather Brewery

Planned: Lambic, American IPA
Fermenting: 6 gals of 1.090 stout (Belgian) & 6 gals of 1.090 stout (English)
Tapped: Berliner Weisse, Black English IPA, German Pils, & Live Oak Primus

 
Reply With Quote
Old 10-12-2009, 05:01 PM   #6
chrisedjohn
Recipes 
 
Oct 2009
Milwaukee
Posts: 30
Liked 1 Times on 1 Posts


Quote:
Originally Posted by lamarguy View Post
Yup, plugging the numbers into Palmer's spreadsheet results in:

Est. SRM (Low): 11
Est. SRM (High): 16
Chloride to Sulfate Ratio: Very Bitter

You should seriously consider using RO water and/or treating your tap water when brewing anything under an SRM of 11.
Wow. That John Palmer can make a mean spreadsheet. I plugged in all the values from my water report (with Sodium, Chloride, and Sulfate values I didn't previously include) and I get:

Est. SRM (Low): 6
Est. SRM (High): 11
Chloride to Sulfate Ratio: Bitter

I can work with that. Thanks for this huge piece of the puzzle. This'll help me adjust future recipes.

 
Reply With Quote
Old 10-12-2009, 05:49 PM   #7
lamarguy
 
lamarguy's Avatar
Recipes 
 
Aug 2008
Austin, TX
Posts: 1,653
Liked 25 Times on 24 Posts


Quote:
Originally Posted by chrisedjohn View Post
Wow. That John Palmer can make a mean spreadsheet. I plugged in all the values from my water report (with Sodium, Chloride, and Sulfate values I didn't previously include) and I get:

Est. SRM (Low): 6
Est. SRM (High): 11
Chloride to Sulfate Ratio: Bitter

I can work with that. Thanks for this huge piece of the puzzle. This'll help me adjust future recipes.
Ya, that's what I did after I downloaded your water report. You may want to recheck the numbers, it should be 11 - 16.
__________________
Doggfather Brewery

Planned: Lambic, American IPA
Fermenting: 6 gals of 1.090 stout (Belgian) & 6 gals of 1.090 stout (English)
Tapped: Berliner Weisse, Black English IPA, German Pils, & Live Oak Primus

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
For what malt can I substitute Euro Pils for the base malt? msheraw All Grain & Partial Mash Brewing 5 10-24-2009 07:06 PM
Base malt to replace dark malt extract GNBrews All Grain & Partial Mash Brewing 8 12-11-2008 04:22 PM
how much base malt sneakypete Recipes/Ingredients 3 06-21-2008 10:53 AM
All Base malt? Bromley Recipes/Ingredients 16 11-29-2007 10:16 PM
Using Vienna malt as base malt fungusamungas All Grain & Partial Mash Brewing 7 05-30-2007 03:16 AM


Forum Jump