Where to get pipe fittings for Aluminum? - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Where to get pipe fittings for Aluminum?
Sign-up To NEW HBT Article Newsletter - Brewing Articles Direct To You!

Thread Tools
Old 10-12-2009, 07:52 AM   #1
Feedback Score: 0 reviews
Join Date: Sep 2009
Location: Tucker, GA
Posts: 356
Liked 3 Times on 3 Posts

Default Where to get pipe fittings for Aluminum?

While making the switch to all grain I managed to get hold of a 15 gallon Aluminum Pot. It works great, but a pain in the a$$ to drain wort out of. I need to find a threaded pipe fitting, I can have welded onto the pot. That way I can put a ball valve on, before I screw up and spill wort. Any ideas?

Jud is offline
Reply With Quote
Old 10-12-2009, 09:44 AM   #2
Feedback Score: 0 reviews
Join Date: May 2009
Location: maryland
Posts: 149
Liked 2 Times on 2 Posts
Likes Given: 1


go weld-less and you can get a stainless setup from bargainfittings.com. i would not go with aluminum as the threads will be easy to strip, and you will have dissimilar metal corrosion with whatever fittings you use (brass, stainless). there are several threads about the weld-less fittings. they work great
Drinking beer is a lifestyle...Brewing it is a hobby

On Tap



Edworts Apfelwein

BB Continental pilsner
Coopers IPA, dryhopped with 1oz cascade
High Sierra Celebration Ale (Clone)
Austin Homebrew Celebration Ale
BreWirfel is offline
Reply With Quote

Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Weldless Fittings vs. Welded Fittings for Keggles Stevorino Equipment/Sanitation 42 10-29-2012 11:07 AM
Aluminum Pot with SS Fittings...Galvanic Corrosion?? shortyjacobs Equipment/Sanitation 6 07-29-2011 09:23 PM
do these fittings match? (pipe to compression) nathan Other 3 11-14-2008 11:43 PM
Copper pipe/fittings in brewing DrewsBrews All Grain & Partial Mash Brewing 18 02-16-2006 04:52 AM

Forum Jump