HBT 2015 Big Giveaway - Winners Drawn - 24 Hours to Claim!

Huge Supporting Membership Discounts - 20% Off - Ends Today!

Home Brew Forums > Home Brewing Beer > General Techniques > Effect of sludge from boil in fermenter ?
Reply
 
Thread Tools
Old 10-05-2009, 02:12 PM   #1
Bru
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2009
Location: Johannesburg, South Africa
Posts: 841
Liked 2 Times on 2 Posts

Default Effect of sludge from boil in fermenter ?

I recently brewed an IPA. When I was racking the cooled wort into the fermenter my ball valve got stuck - I assume with a lump of hops - so I ended up pouring the last bit of wort into the fermenter. The sludge / hops in the bottom ended up going in as well.
Will this have any effect on the final product ?
Bru is offline
 
Reply With Quote
Old 10-05-2009, 02:24 PM   #2
samc
Feedback Score: 1 reviews
Recipes 
 
Join Date: Aug 2008
Location: Portland OR
Posts: 5,423
Liked 60 Times on 56 Posts
Likes Given: 29

Default

Many people allow all the trub & hops to go into the fermenter. IMO it must in some way change the final output however without doing a real side by side comparison I don't know how you could tell which is better. I think you will be fine and have a good batch of beer when done. I usually have the trub/break material in my fermenter without hops which were contained in a hop bag during boil.
samc is offline
 
Reply With Quote
Old 10-05-2009, 02:35 PM   #3
Revvy
Post Hoc Ergo Propter Hoc
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Revvy's Avatar
Recipes 
 
Join Date: Dec 2007
Location: "Detroitish" Michigan
Posts: 40,808
Liked 2839 Times on 1686 Posts
Likes Given: 3499

Default

Well I use a immersian chiller and when it is cool I use my sanitized auto shipon and rack it....before that, EIther I just dumped everything in, without straining, just pour it in the bucket or in the funnel....Or I would use a big strainer that fit in the funnel for a carboy, or a sanitized 5 gallon nylon paint strainer bag in the bucket...

Many people don't bother straining at all..sometimes I don't bother....It really doesn't matter...anything will settle.

In other words, there is no wrong way to do it, or better way, or way that will make the best beer...they all work...the choice is what will work the best for you.

What I do with my IC, is chill the wort, then I lean the bottom of my autosiphon about two coils up from the bottom on the metal of the siphon. That rests it above most of the break material and trub, then I rack it to the fermenter until I'm down to that and carefully lower the siphon down into the gunk, just trying to get as much of the wort as possible without letting in the hops and break matter.
__________________
Like my snazzy new avatar? Get Sons of Zymurgy swag, here, and brew with the best.

Revvy's one of the cool reverends. He has a Harley and a t-shirt that says on the back "If you can read this, the bitch was Raptured. - Madman

I gotta tell ya, just between us girls, that Revvy is HOT. Very tall, gorgeous grey hair and a terrific smile. He's very good looking in person, with a charismatic personality... he drives like a ****ing maniac! - YooperBrew
Revvy is offline
 
Reply With Quote
Old 10-06-2009, 02:28 PM   #4
jlpred55
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Posts: 423
Liked 3 Times on 3 Posts
Likes Given: 1

Default

I dump it all in. It settles very quickly. No ill effect that I have noticed.
jlpred55 is offline
 
Reply With Quote
Old 10-07-2009, 01:12 PM   #5
Bru
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2009
Location: Johannesburg, South Africa
Posts: 841
Liked 2 Times on 2 Posts

Default

Yeah - thanks
Bru is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Partial Boil effect on Beer color mparmer Beginners Beer Brewing Forum 5 09-25-2009 10:44 PM
A lot of sludge in primary fermenter RedDragon Beginners Beer Brewing Forum 5 02-17-2009 08:47 PM
Decoction Mashing: Effect of boil time stoutaholic All Grain & Partial Mash Brewing 9 02-17-2009 05:48 PM
Effect of boil intensity on final product? aubrey Beginners Beer Brewing Forum 10 02-16-2009 11:52 AM
What is the effect of a partial boil? TheSchwill All Grain & Partial Mash Brewing 2 01-13-2008 09:02 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS