Coldbreak Brewing Giveaway - Open to All!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > How to remove kegerator shank from tower?
Reply
 
Thread Tools
Old 09-29-2009, 08:51 PM   #1
jaobrien6
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2007
Location: Seattle, WA
Posts: 187
Liked 1 Times on 1 Posts

Default How to remove kegerator shank from tower?

So, I'm trying to remove the shanks from my draft tower so I can replace the beer lines with longer lines, and I have no clue how to get the shanks off. I don't seem to have a wrench that I can use to get around the brass nut, since there are 2 taps right next to each other. Any suggestions on the easiest way to do this? I can't be the first person who's struggled with this, but searching didn't turn up anything useful.



jaobrien6 is offline
 
Reply With Quote
Old 09-29-2009, 08:55 PM   #2
Brooklyn-Brewtality
Four Beasts Brewery
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Brooklyn-Brewtality's Avatar
Recipes 
 
Join Date: Aug 2008
Location: Brooklyn
Posts: 2,280
Liked 22 Times on 17 Posts
Likes Given: 1

Default

here is my struggle: http://www.homebrewtalk.com/f35/remo...shanks-137001/


Basically, get some needle-nose pliers and prepare to be frustrated.


__________________
Kegged: Berlinerweisse, Dubbel, Galaxy Wheat
Bottled: Golden Strong, Mild, IIPA, Rauch
Fermenting: Saison, Imperial Wheat Stout, Brett Saison, APA, Brett Roggenbier
Brooklyn-Brewtality is offline
 
Reply With Quote
Old 09-29-2009, 08:58 PM   #3
jaobrien6
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2007
Location: Seattle, WA
Posts: 187
Liked 1 Times on 1 Posts

Default

Thanks for the quick reply. I don't know how I missed that thread when searching, it was just a couple weeks ago, too. Alright, I guess I'll keep fighting with it. Good to know you got yours eventually. Thanks!
jaobrien6 is offline
 
Reply With Quote
Old 09-29-2009, 09:14 PM   #4
Cpt_Kirks
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2008
Location: Lakeland TN
Posts: 3,746
Liked 46 Times on 40 Posts

Default

Would a set of channel lock pliers do it?

Cpt_Kirks is offline
 
Reply With Quote
Old 09-29-2009, 09:16 PM   #5
Cpt_Kirks
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2008
Location: Lakeland TN
Posts: 3,746
Liked 46 Times on 40 Posts

Default

Also, looking at that other thread, could you make a shank wrench?

Take a cheap wrench the proper size, and cut out a section using a dremel tool with a cut off wheel?
Cpt_Kirks is offline
 
Reply With Quote
Old 09-29-2009, 09:19 PM   #6
Brooklyn-Brewtality
Four Beasts Brewery
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Brooklyn-Brewtality's Avatar
Recipes 
 
Join Date: Aug 2008
Location: Brooklyn
Posts: 2,280
Liked 22 Times on 17 Posts
Likes Given: 1

Default

the problem with channel lock pliers, or any pliers but needle-nose, is that even if you can get a grip on the shank nut, you have no room to turn.

I suppose you could cut out a notch from an existing wrench, but are you really saving yourself any trouble by getting a cheap wrench, cutting a notch in it and hoping that works over just forcing your way through with needle-nose? i doubt it.
__________________
Kegged: Berlinerweisse, Dubbel, Galaxy Wheat
Bottled: Golden Strong, Mild, IIPA, Rauch
Fermenting: Saison, Imperial Wheat Stout, Brett Saison, APA, Brett Roggenbier
Brooklyn-Brewtality is offline
 
Reply With Quote
Old 09-29-2009, 09:38 PM   #7
humann_brewing
More Humann than human
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
humann_brewing's Avatar
Recipes 
 
Join Date: Oct 2008
Location: the sun
Posts: 15,733
Liked 320 Times on 316 Posts
Likes Given: 22

Default

Quote:
Originally Posted by Berserker_Brew View Post
here is my struggle: http://www.homebrewtalk.com/f35/remo...shanks-137001/


Basically, get some needle-nose pliers and prepare to be frustrated.
I had the same struggle, I had to fit 3 in too.

http://www.homebrewtalk.com/f35/inst...ml#post1249955

humann_brewing is offline
 
Reply With Quote
Old 09-29-2009, 10:15 PM   #8
jaobrien6
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2007
Location: Seattle, WA
Posts: 187
Liked 1 Times on 1 Posts

Default

Ok, got 'em off. The needle nosed pliers worked on one of the nuts, I guess it was a little looser, and that gave me enough room to get the other one off. Thanks all!

BTW, it kills me a little bit, getting advice from a Giants fan.
jaobrien6 is offline
 
Reply With Quote
Old 09-29-2009, 10:17 PM   #9
olllllo
[]-O-[]
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
olllllo's Avatar
Recipes 
 
Join Date: Apr 2006
Location: Phoenix, Arizona
Posts: 13,513
Liked 134 Times on 110 Posts
Likes Given: 13

Default

Spanning wrench. I think micromatic sells them
__________________
Rabbit And Coyote Schwag
Rob - Phoenix Ambassador to Milwaukee
Where did your avatar go?
Ginger Beer for Moscow Mules Bacon Vodka
Twitter
olllllo is offline
 
Reply With Quote
Old 09-29-2009, 10:21 PM   #10
olllllo
[]-O-[]
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
olllllo's Avatar
Recipes 
 
Join Date: Apr 2006
Location: Phoenix, Arizona
Posts: 13,513
Liked 134 Times on 110 Posts
Likes Given: 13

Default

http://www.micromatic.com/draft-keg-...id-MP-042.html


__________________
Rabbit And Coyote Schwag
Rob - Phoenix Ambassador to Milwaukee
Where did your avatar go?
Ginger Beer for Moscow Mules Bacon Vodka
Twitter
olllllo is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale - Single tower, elbow shank, faucet and long shank for sale tmoney1224 For Sale 2 07-09-2009 11:50 PM
Kegerator shank/connector question StunnedMonkey Bottling/Kegging 6 08-28-2008 04:56 PM
Shank bore size Q for kegerator? EamusCatuli Equipment/Sanitation 1 08-01-2008 02:29 PM
Draft Tower vs. Shank Thru Door? maxr Bottling/Kegging 40 12-17-2007 04:43 AM
Kegerator shank hole question e lo Bottling/Kegging 8 09-18-2007 12:42 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS