mcmaster through-wall/bulkhead tank fittings - Page 3 - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns & Hot Liquor Tanks > mcmaster through-wall/bulkhead tank fittings

Thread Tools
Old 05-10-2013, 01:43 PM   #21
May 2013
Posts: 4

Originally Posted by Sawdustguy View Post
I have looked at them and I am sure they will work well but man they are expensive. I can make a through-wall fitting for under $10 using a simple 1/2" coupler, 1/2" nipple, (2) washers and (2) O-rings. With that being said I will probably give one a try on Rev. 2 of my brewery.
Could you please explain more detaily your assembly?
Thank you!

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Keg/Tun Bulkhead Fittings MattieSy Equipment/Sanitation 12 12-31-2010 07:45 AM
show me your homemade bulkhead fittings! Huizer Kettles, Mash Tuns & Hot Liquor Tanks 9 10-13-2009 07:04 PM
Bargain Fittings Bulkhead Attachments? Gremlyn Equipment/Sanitation 2 07-06-2009 07:35 PM
Are Buna o rings ok for bulkhead fittings? bscriver Equipment/Sanitation 1 01-14-2009 02:23 AM
Tailpiece fittings on McMaster? MadDwarf DIY Projects 3 09-16-2008 05:24 AM

Forum Jump