55 gal drum mash tun - false bottom ideas? - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns & Hot Liquor Tanks > 55 gal drum mash tun - false bottom ideas?

Reply
 
Thread Tools
Old 09-28-2009, 06:22 PM   #1
Pangea
Recipes 
 
Apr 2009
Lafayette, LA
Posts: 312
Liked 4 Times on 4 Posts



I'm building a 1.5 BBL system from 55 gallon stainless drums. I feel good about my plan for all components except for the false bottom for the mash/lauter tun. Anyone have any ideas what should be done here? I would spend a little money for the right equipment, for example paying for a custom false bottom that I could drop in. I was also considering a cpvc manifold, but I'm worried about having to un-secure the manifold from bulkhead fitting when cleaning. A false bottom can just be lifted out as it isn't attached to anything.

Does anyone know where a false bottom can be purchased for a 55 gallon drum? I can't see any examples where someone may have done this successfully before. For example, has anyone seen the blichmann false bottom for their 55gallon boilermaker used successfully in a 55 gallon drum?

Thanks in advance. Just looking for some direction from the collective HBT think tank.

 
Reply With Quote
Old 09-28-2009, 06:46 PM   #2
CodeRage
Death by Magumba!
HBT_LIFETIMESUPPORTER.png
 
CodeRage's Avatar
Recipes 
 
Aug 2007
Melbourne, Fl
Posts: 2,222
Liked 50 Times on 21 Posts


Here is a sheet of perforated metal that you can make your own with. I took a swag at the hole diameter.
http://www.mcmaster.com/#9358t311/=3twqqg
__________________
Brutus 20e build | Electrical Primer for Brewers | Auber SYL-2362A2 PID Install & Config
So as I am walking out the door this morning I think to my self:
"self, going to work on Monday is like knowing you're going to get kicked in the nuts. You just don't know when or by who"

 
Reply With Quote
Old 09-28-2009, 07:12 PM   #3
Pangea
Recipes 
 
Apr 2009
Lafayette, LA
Posts: 312
Liked 4 Times on 4 Posts


Quote:
Originally Posted by CodeRage View Post
Here is a sheet of perforated metal that you can make your own with. I took a swag at the hole diameter.
http://www.mcmaster.com/#9358t311/=3twqqg
Hmm.. Yep, that would work. I guess drains could be in the bottom of the drum, with this perforated plate over the top - just resting on the drum bottom. This is the same concept I have on my keggle system now, but the perforated false bottom has a hinge in the middle so it can be folded for removal. I'm talking to the guy who made it for me originally to see if he could do something similar, yet larger, for a 55 gallon drum - which would need to be about 22" diameter.

 
Reply With Quote
Old 09-28-2009, 07:36 PM   #4
CodeRage
Death by Magumba!
HBT_LIFETIMESUPPORTER.png
 
CodeRage's Avatar
Recipes 
 
Aug 2007
Melbourne, Fl
Posts: 2,222
Liked 50 Times on 21 Posts


Quote:
Originally Posted by Pangea View Post
Hmm.. Yep, that would work. I guess drains could be in the bottom of the drum, with this perforated plate over the top - just resting on the drum bottom. This is the same concept I have on my keggle system now, but the perforated false bottom has a hinge in the middle so it can be folded for removal. I'm talking to the guy who made it for me originally to see if he could do something similar, yet larger, for a 55 gallon drum - which would need to be about 22" diameter.
Just doing a little brain dumping here if you are looking to DIY.
yeah, you could also put some stainless screws through it with some nuts as a stand off. Cut two halves out of it so they over lap and drill a pickup tube for it if a drain in the bottom is a problem.
__________________
Brutus 20e build | Electrical Primer for Brewers | Auber SYL-2362A2 PID Install & Config
So as I am walking out the door this morning I think to my self:
"self, going to work on Monday is like knowing you're going to get kicked in the nuts. You just don't know when or by who"

 
Reply With Quote
Old 09-28-2009, 08:55 PM   #5
nickpgoodman
Recipes 
 
Mar 2009
Bedford, TX
Posts: 61
Liked 1 Times on 1 Posts


Our club system is a 100 gallon rubbermaid stock tank, we use a Bazooka T, I'd be willing to bet you could do the same since it's only 50 gallons.

Actually, ours is two of the Bazooka 12" pieces but we made our own Tee if I recall.





http://www.northernbrewer.com/brewin...il-screen.html


 
Reply With Quote
Old 09-28-2009, 11:34 PM   #6
ClaudiusB
Recipes 
 
Dec 2007
El Paso, Texas
Posts: 1,357
Liked 102 Times on 79 Posts


I have a 25" diameter false bottom in my 200 liter (52 gallon) combination mash/later tun.
Beer Beer & more Beer made it to my specifications a few years ago.
They have always done a great job for me.



The only change I would do the next time, make a two or three piece design.


Cheers,
ClaudiusB

 
Reply With Quote
Old 09-29-2009, 12:20 AM   #7
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,381
Liked 1793 Times on 1140 Posts


What kind of insulation are you thinking of using for a 55g drum? How do you suppose you're going to stir that thing? A boat oar? How will you supply heat if necessary?
__________________
Welcome to BrewHardware.com. I love you.
New Stirplates are IN!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.


 
Reply With Quote
Old 09-29-2009, 02:07 AM   #8
brewpal
Recipes 
 
Jan 2008
Salem, OR
Posts: 120
Liked 15 Times on 10 Posts


Suggestions:

Pumping strike water into the mash tun:



False bottom in mash tun. It is a perf screen originally designed to fit a sanke kettle. Works great in this configuration. Held down firm by pressure from copper pipe:




Boil kettle hop filter is a LARGE hose braid (about 1.5" diam). Just starting to collect run-off:



Stirring in hops:


Big_Cat Likes This 
Reply With Quote
Old 09-29-2009, 02:24 AM   #9
Cold_Steel
Recipes 
 
Apr 2009
Posts: 558
Liked 1 Times on 1 Posts


now thats a man!
__________________
Quote:
Originally Posted by jpc
Doesn't blowing on it when its soft cause it to get hard? It's been a while, but I think that's how it used to work...

 
Reply With Quote
Old 09-29-2009, 02:56 AM   #10
Pangea
Recipes 
 
Apr 2009
Lafayette, LA
Posts: 312
Liked 4 Times on 4 Posts


Quote:
Originally Posted by Bobby_M View Post
What kind of insulation are you thinking of using for a 55g drum? How do you suppose you're going to stir that thing? A boat oar? How will you supply heat if necessary?
I was planning on using a few layers of reflective bubble wrap insulation. I currently use two layers on my keggle setup, just wrapped around the side, not the bottom and it loses about 3 degrees over the 60 minute period. For the 55 gal setup I will use more, both around the sides plus the bottom and also maybe on the lid, depending... I haven't figured out the lid yet. I'm going to weld legs on the drum so insulating the bottom will be important and not too difficult. No additional heat, although I was considering using a 110V drum heater belt like the 300W one on the following link.
http://www.morsemfgco.com/products/drum-heater.htm
I dont think heating will be necessary, for my recipes anyway, as losing a few degrees over 60 to 90 minutes has resulted in some awesome beers!

I'm very open to suggestions for the insulation though. I've tried to search for a pre-made drum blanket or insulation, which you'd think would exist for standard size 55 gallon drums... but of course it doesn't.

Edit - Oh yeah, I might use a boat oar from my pirogue! We'll see how well my large stainless crawfish boiling paddle works first though.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
False bottom in a mash tun dmbnpj Beginners Beer Brewing Forum 12 10-30-2014 12:37 PM
New Mash Tun - False Bottom vs. Manifold? k2brew All Grain & Partial Mash Brewing 11 10-31-2009 01:09 PM
False bottom on mash tun? dmbnpj Beginners Beer Brewing Forum 3 09-28-2009 02:14 AM
Mash in Keggle - False Bottom vs. amount of mash water Griffsta All Grain & Partial Mash Brewing 2 03-24-2009 01:09 PM
False Bottom for new Mash Tun ctkevin Equipment/Sanitation 4 05-13-2008 03:35 PM


Forum Jump