Starter batch looking a little down - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > General Techniques > Starter batch looking a little down

Reply
 
Thread Tools
Old 09-21-2006, 05:35 AM   #1
WarStreetBrewer
Recipes 
 
Aug 2006
Posts: 11


I know this sounds like a common issue, so I did search the forum first. Haha, I know how h/c posters get.

I'm just a little worried about my starter. It's been more than five hours and all the yeast seems to have settled to the bottom and nothing much is going on. I know some of the mistakes I made, but if I could get some feedback on it anyway. I plan on brewing tomorrow night and will need to buy a replacement if necessary. Is it shot?

What I did was boil about a pint of water with 1/2 c. of light DME for about 15 minutes. I chilled it to 90F or so, poured it directly into a glass jar and put it in the fridge until it was probably around 75F. I pitched the yeast (White Labs Dry English Ale). The temperature has probably dropped below 70F and the vial said it shouldn't go below that, but I've been keeping it around 75-80F since then. I keep the lid closed, but it's a little slack, as I've read it needs to vent out the C02, but needs to be protected from infection (I don't have an airlock to fit). Everything was sanitized.

Whats up!?
__________________
----
Drinking: Traditional Hefeweizen
Conditioning: nothing
Secondary: empty
Primary: Imperial Mariner IPA
Considering: A mock-up of Morimoto's Soba Ale

 
Reply With Quote
Old 09-21-2006, 07:09 AM   #2
Brewsmith
 
Brewsmith's Avatar
Recipes 
 
Aug 2005
Torrance, CA
Posts: 6,252
Liked 62 Times on 58 Posts


Just give it more time. By the time you wake up, log on, and read this post I'll bet you $5 you'll see action. That is of course if the yeast is alive and you properly aerated it first.

I'm assuming you're not going to intentionally screw it up for a $5 internet wager.
__________________
Fermenting:#160 Apollo/Calypso Pale Ale
Kegged:#153 Old Helicon Barleywine 2013, #157 Irish Red, #158 Mosaic IPA, #159 Bravo/Delta ESB
Up Next:Brown Porter, American Stout, Imperial Stout
My Recipes
Tuba Sonata

Smith & Co. Custom Tap Handles

 
Reply With Quote
Old 09-21-2006, 12:09 PM   #3
WarStreetBrewer
Recipes 
 
Aug 2006
Posts: 11

Well I can't afford the five bucks, so I might just screw it up!

Right now it looks the same. The air in my apt. is about 66F, so to keep it at 70F I've been keeping it in a pyrex dish filled with warm water, about 75-80F and changing it every so often. I can't stick around all day to keep changing it tho..

There are little bubbles of C02 (I presume) running up the sides, but the yeast is still sitting at the bottom and there is no activity on the top. I'm keeping the lid just shy of where it catches when it's tightened and I noticed a very very faint pssssst when I was adjusting it last night.. so I guess the yeast is alive, but it's not doing too much.

I'm worried it might be too cold.. but if it is too cold for the yeast to really get going in the starter, can I still pitch it?
__________________
----
Drinking: Traditional Hefeweizen
Conditioning: nothing
Secondary: empty
Primary: Imperial Mariner IPA
Considering: A mock-up of Morimoto's Soba Ale

 
Reply With Quote
Old 09-21-2006, 12:19 PM   #4
ian
 
ian's Avatar
Recipes 
 
Jul 2005
Pendleton, SC USA
Posts: 473
Liked 5 Times on 5 Posts


I suggest tightening the lid and shaking it like crazy for a minute or two. Then loosen the lid for pressure release. I think it needs more aeration. but, you may not ever see a big fermentation - much less an actual krausen. My last starter didn't do much visually other than make my airlock bubble, which you can't see with your loose lid. I used it for two batches a day apart and both were fermenting like crazy within a few hours of pitching.

 
Reply With Quote
Old 09-21-2006, 03:06 PM   #5
boo boo
Recipes 
 
Jun 2005
Hearts's Delight, Newfoundland
Posts: 4,165
Liked 35 Times on 30 Posts


1/2 a cup of DME for 1 pint of water seems a little high. What is the SG of the starter wort? should be around 1040.
__________________
How do you BBQ an elephant....first you get your elephant....

 
Reply With Quote
Old 09-21-2006, 03:08 PM   #6
ian
 
ian's Avatar
Recipes 
 
Jul 2005
Pendleton, SC USA
Posts: 473
Liked 5 Times on 5 Posts


I don't know if 1/2 cup of DME/pint is too high, but the one I mentioned before used 1 cup DME to 1 quart - so same ratio. If that's too much DME maybe I just got (have been getting) lucky. I didn't take a gravity reading on it though, but its what I usually use.

 
Reply With Quote
Old 09-21-2006, 03:45 PM   #7
Desert_Sky
 
Desert_Sky's Avatar
Recipes 
 
Mar 2006
Sierra Vista, AZ
Posts: 4,077
Liked 53 Times on 41 Posts


Quote:
Originally Posted by WarStreetBrewer
W
There are little bubbles of C02 (I presume) running up the sides, but the yeast is still sitting at the bottom and there is no activity on the top.
Sounds like you're starting.
__________________
Desert Sky Brewing Co.
Sierra Vista, AZ

 
Reply With Quote
Old 09-22-2006, 04:58 PM   #8
Brewsmith
 
Brewsmith's Avatar
Recipes 
 
Aug 2005
Torrance, CA
Posts: 6,252
Liked 62 Times on 58 Posts


I had yeast just recently look like that as well. It was White Labs 029 German Ale. I did a starter and all it did was hae small bubbles come up the sides, No krausen or anything. I added more DME and still nothing else. I ended up pitching it and the brew took off like crazy. Your yeast seems perfectly fine to me.
__________________
Fermenting:#160 Apollo/Calypso Pale Ale
Kegged:#153 Old Helicon Barleywine 2013, #157 Irish Red, #158 Mosaic IPA, #159 Bravo/Delta ESB
Up Next:Brown Porter, American Stout, Imperial Stout
My Recipes
Tuba Sonata

Smith & Co. Custom Tap Handles

 
Reply With Quote
Old 09-23-2006, 09:30 PM   #9
WarStreetBrewer
Recipes 
 
Aug 2006
Posts: 11

Well you guys were right.. it was fine. Around the 20-22 hour mark, I shook it up a bit and there was a lot of CO2 in suspension. An hour after that, I cracked the seal on the lid and it hissed like a mofo. I'm glad I did that because I don't know how much longer the glass would have held up. By the time I pitched it, it was clearly strong and healthy. I was getting > 200 BPM on the airlock within 18 hours.

Thanks for the tips!
__________________
----
Drinking: Traditional Hefeweizen
Conditioning: nothing
Secondary: empty
Primary: Imperial Mariner IPA
Considering: A mock-up of Morimoto's Soba Ale

 
Reply With Quote
Old 09-23-2006, 09:33 PM   #10
Brewsmith
 
Brewsmith's Avatar
Recipes 
 
Aug 2005
Torrance, CA
Posts: 6,252
Liked 62 Times on 58 Posts


If you can, try to use a container that you can put an airlock on for the starter. You can use a glass growler, a gallon jug or what I use, an erlinmeyer flask. Just get a drilled rubber stopper to fit the top and put the airlock in. Exploding glass is never fun.
__________________
Fermenting:#160 Apollo/Calypso Pale Ale
Kegged:#153 Old Helicon Barleywine 2013, #157 Irish Red, #158 Mosaic IPA, #159 Bravo/Delta ESB
Up Next:Brown Porter, American Stout, Imperial Stout
My Recipes
Tuba Sonata

Smith & Co. Custom Tap Handles

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Can I use one vile of yeast + starter for a 10g batch? stever General Techniques 17 04-01-2009 12:31 AM
small batch barleywine. Need a starter?? ethangray19 Beginners Beer Brewing Forum 11 01-04-2009 08:44 PM
Using a small amount from another batch as a starter? BrewinJack Cider Forum 2 12-07-2008 09:38 PM
Starter for 10 gallon batch.. aekdbbop General Techniques 9 06-19-2008 03:31 PM
S-23 Starter for 10 gallon batch? Bobby_M All Grain & Partial Mash Brewing 1 04-02-2007 10:42 PM


Forum Jump