Coldbreak Brewing Giveaway - Open to All!

Home Brew Forums > Home Brewing Beer > Brew Science > 1st water adjustment - please check my numbers
Reply
 
Thread Tools
Old 09-27-2009, 02:49 AM   #1
JLem
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Attleboro, MA
Posts: 3,652
Liked 176 Times on 153 Posts
Likes Given: 4

Default 1st water adjustment - please check my numbers

I'm set to brew tomorrow and would like to adjust my water to match the beer. I'd appreciate someone(s) checking my numbers, at least generally, to make sure I'm not overdoing things. Here is my current water profile:

Calcium - 11.5 ppm
Magnesium - 2.5 ppm
Bicarbonate - 34 ppm
Sodium - 50 ppm
Chloride - 110 ppm
Sulfate - 9 ppm

I'm going to brew a Scottish Ale, SRM ~15. I'd like to get my residual alkalinity up some and bring the sulfate up as well since currently my SO4:Cl is way too skewed (though for this beer maybe not too big a problem)

I'm doing a 5.5 gallon batch with a partial mash (~1 gallon mash).

Messing around with some of the software/spreadsheets out there, I've come up with the following additions:

Chalk - 0.5 g in mash; 2 g in boil
Gypsum - 0.5 g in mash; 2 g in boil
Baking Soda - 0.5 g in mash; 2 g in boil

Does this look like "normal" amounts? Any input would be greatly appreciated.


__________________
My Hombrewing Blog

My Beer Cellar
JLem is offline
 
Reply With Quote
Old 09-27-2009, 06:39 PM   #2
BargainFittings
Sponsor
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 1 reviews
 
BargainFittings's Avatar
Recipes 
 
Join Date: Nov 2008
Location: Allen TX
Posts: 1,939
Liked 60 Times on 52 Posts
Likes Given: 5

Default

Looks ok. Not sure the effect of splitting some in the mash and some in the boil.

I personally just started building my water or amending it as needed.

What calculators are you using?


BargainFittings is offline
 
Reply With Quote
Old 09-27-2009, 07:49 PM   #3
JLem
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Attleboro, MA
Posts: 3,652
Liked 176 Times on 153 Posts
Likes Given: 4

Default

Quote:
Originally Posted by BargainFittings View Post
Looks ok. Not sure the effect of splitting some in the mash and some in the boil.

I personally just started building my water or amending it as needed.

What calculators are you using?
I'm using one of the spreadsheets posted here on HBT - EZ Water Adjustment

If I put everything in the mash, my mash residual hardness will not be correct. Likewise if I don't put any in the mash. The idea, I think, is to split it proportionally so that the mash and the final beer will have the appropriate chemistry.
__________________
My Hombrewing Blog

My Beer Cellar
JLem is offline
 
Reply With Quote
Old 09-27-2009, 11:53 PM   #4
JLem
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Attleboro, MA
Posts: 3,652
Liked 176 Times on 153 Posts
Likes Given: 4

Default

Ended up not brewing this weekend - other things took longer than expected. So, if anyone else has any advice/suggestions, I'm all ears!
__________________
My Hombrewing Blog

My Beer Cellar
JLem is offline
 
Reply With Quote
Old 09-28-2009, 12:12 AM   #5
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 3 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,697
Liked 1263 Times on 833 Posts
Likes Given: 34

Default

I would go with .5g of epsom salt too to get the magnesium and sulfate up a bit more. Since most of your fermentables are coming from extract (that already has ions), you might not need the boil additions at all.
__________________
Welcome to BrewHardware.com. I love you.
New 100% Stainless Steel Heating Elements are IN! ULWD 5500w Ripple, 2000w, 1500w, etc
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.
July 4th Sale, $20 off plate chillers through July 4th.
Bobby_M is offline
 
Reply With Quote
Old 09-28-2009, 12:46 AM   #6
JLem
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Attleboro, MA
Posts: 3,652
Liked 176 Times on 153 Posts
Likes Given: 4

Default

Quote:
Originally Posted by Bobby_M View Post
Since most of your fermentables are coming from extract (that already has ions), you might not need the boil additions at all.
I read something about that, but wasn't sure how to factor it in. You say may not need - how would I know?
__________________
My Hombrewing Blog

My Beer Cellar
JLem is offline
 
Reply With Quote
Old 09-28-2009, 01:51 AM   #7
JKoravos
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2009
Location: Chelmsford, MA
Posts: 1,151
Liked 53 Times on 38 Posts
Likes Given: 21

Default

What's the recipe? What is your water to grain ratio for the partial mash?
JKoravos is offline
 
Reply With Quote
Old 09-28-2009, 02:00 AM   #8
JLem
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Attleboro, MA
Posts: 3,652
Liked 176 Times on 153 Posts
Likes Given: 4

Default

Quote:
Originally Posted by JKoravos View Post
What's the recipe? What is your water to grain ratio for the partial mash?
I generally mash at 1.25 quarts per pound

my grain bill is:
1 lbs Pale Malt, Maris Otter (16.56%)
1 lbs Caramel/Crystal Malt 40L (16.56%)
7.0 oz Caramel/Crystal Malt 120L (7.28%)
7.0 oz Honey Malt (7.28%)
7.0 oz Munich Malt (7.28%)
1.9 oz Chocolate Malt (1.99%)
2 lbs 9.6 oz Extra Light Dry Extract (43.05%)
__________________
My Hombrewing Blog

My Beer Cellar
JLem is offline
 
Reply With Quote
Old 09-28-2009, 02:17 AM   #9
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 3 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,697
Liked 1263 Times on 833 Posts
Likes Given: 34

Default

I never quite figured out what the best assumption is to be made on the ions in extract. I know that if I were making malt extract, I'd probably shoot for calcium/magnesium levels at the minimum to make wort efficiently and keep everything else low and balanced. But... who knows what the heck they do.
__________________
Welcome to BrewHardware.com. I love you.
New 100% Stainless Steel Heating Elements are IN! ULWD 5500w Ripple, 2000w, 1500w, etc
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.
July 4th Sale, $20 off plate chillers through July 4th.
Bobby_M is offline
 
Reply With Quote
Old 09-28-2009, 03:11 AM   #10
JKoravos
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2009
Location: Chelmsford, MA
Posts: 1,151
Liked 53 Times on 38 Posts
Likes Given: 21

Default

First, you should put just your grain bill into promash/beertools/whatever and figure out what the expected SRM of that beer would be (i.e. if you didn't add the DME). That will tell you the SRM of the mash, and what RA to shoot for. Add salts to your mash to get the proper RA for that color, not the final beer color.

With regards to your Cl:SO4 ratio, you can probably assume that the company that makes the DME uses a balanced ratio and you can shoot for balancing out the ratio for the water that you're adding. I'd probably add a mix of gypsum/epsom to the boil kettle for balancing the Cl:SO4 ratio since your water is really skewed towards chloride. It's up to you what you want the final ratio to be.


JKoravos is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Check my numbers Csuho All Grain & Partial Mash Brewing 2 10-21-2009 12:25 AM
Water Adjustment Sanity Check bolts Brew Science 18 10-04-2009 03:14 AM
Please check my numbers for a 9% brew senorfartman All Grain & Partial Mash Brewing 13 02-01-2008 07:36 PM
1st AG- can someone check my procedure/numbers? megavites All Grain & Partial Mash Brewing 7 03-27-2007 01:23 AM
Check my numbers please? BrewMeister Recipes/Ingredients 9 03-04-2006 03:15 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS