Imperial Stout Fermentation Stuck - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Imperial Stout Fermentation Stuck

Thread Tools
Old 09-25-2009, 05:05 PM   #1
Sep 2009
Kansas City
Posts: 45

Hi All, I brewed an Imperial Stout a few weeks ago, it's actually the recipe available in Extreme Brewing by Sam Calagione. I don't have the book in front of me at the moment, but if I recall correctly, the OG was just over 1.1 (1.102 maybe) and after two weeks of fairly steady but not crazy fermentation the krausen disappeared and it stopped bubbling. Reading around on these forums, I realized that this didn't necessarily mean much, so I decided to check the gravity. It was at 1.05 and unchanged after I checked it three days later. The final gravity listed in the book was somewhere around 1.02 (1.026 maybe). So I guess I'm new enough to this that I have a few questions. I would be grateful for any help you all could provide.

* Is it safe to say the fermentation has stopped?

* The book didn't specifiy how many Wyeast packs to use so I only pitched one - directly into the cooled wort. Reading around on the forums I get the impression I should have used more yeast for such a big brew and probably made a starter. Is it too late to add more yeast?

* If my only option is to move it to the secondary as is, will any fermentation continue in the secondary and in the bottles? Or is the current gravity and ABV the best I can hope for?

Reply With Quote
Old 09-25-2009, 05:11 PM   #2

Try rocking your bucket back and forth a few times. It will help get some yeast back in suspension and continure fermentation. You may have to do this a few times before you're able to get it to 1.020. Next time, with beers this big, I suggest AT LEAST 3-4L starters. The one pack of yeast just doesn't cut it.
He who drinks beer sleeps well. He who sleeps well cannot sin. He who does not sin goes to heaven.

Another HERMS rig...

Reply With Quote
Old 09-25-2009, 05:32 PM   #3
Edcculus's Avatar
Jun 2007
Greenville, SC
Posts: 4,546
Liked 50 Times on 46 Posts

With an OG of 1.100 and a FG of 1.026, thats about 74% attenuation. Not bad at all. You don't really want a RIS to go that low. Unlike a Tripel, its not supposed to be a very dry beer. If you go too low, there won't be any sweetness to back up all the alcohol and bitterness.

Reply With Quote
Old 09-25-2009, 09:25 PM   #4
Sep 2009
Kansas City
Posts: 45

Many thanks guys. This is the first time I've tried anything crazy so maybe I'm over thinking things. When I rock the carboy, is there anything I should be aware of? Such as how much it should be rocked or how often? Should I try to keep it from splashing very much?

Also, I haven't made that many batches of beer but it seems like fermentation always slows to a stop around two weeks. Is it unreasonable to think a big beer like this would finish in two weeks? The book doesn't give a time frame on when fermentation should end. Could it potentially take months?

Reply With Quote
Old 09-25-2009, 09:38 PM   #5
ChshreCat's Avatar
Aug 2008
Camano Island, Washington
Posts: 11,533
Liked 546 Times on 438 Posts

You don't need to rock it much at all, if you want to try that. I don't even really get mine up on edge from the floor when I do it. Just take the neck and gently move in a circle so the liquid starts moving and you see a light haze of yeast particles start to rise up from the cake. You don't need to get the whole cake upset, just stir the surface up a little bit. 5-10 gentle circles on the neck will usually do it.
"Science + beer = good!"
-Adam Savage

Reply With Quote
Old 09-25-2009, 11:04 PM   #6
jescholler's Avatar
Feb 2009
Louisville, CO
Posts: 534
Liked 6 Times on 6 Posts

Here's a good thing to try if rocking doesn't get it finished:

In the future, you'll want to be sure to use the pitching rate calculator on to find out how much yeast you need.
Harsh Bitterness Experiment

Primary: Not until fall :(
Bottle: English Barleywine
On Deck: Session APA, Vanilla Oatmeal Stout

Reply With Quote
Old 09-26-2009, 01:20 AM   #7
Doe Re Mi Beer
schweaty's Avatar
Sep 2008
Glass City
Posts: 1,808
Liked 46 Times on 20 Posts

Which type of Wyeast yeast did you use and at what temperature did you ferment? If you did this as an all grain recipe what was your mash temperature?

If you didn't do a starter you probably should have, especially with such a high gravity beer. Starters are an absolute must when using liquid yeast in my opinion. I tried to test the White Labs claim of being "pitchable" with a pale ale around 1.055 original gravity and even pitched two vials of yeast. The fermentation got going withing 24 hours but it was by far the slowest I've ever had. Normally with a starter I see signs of active fermentation within 8 - 12 hours.

Reply With Quote
Old 09-26-2009, 02:56 AM   #8
Mar 2009
Posts: 216

I recommend liquid yeast with a starter, I personally think 3 - 4 liter starters are a bit over kill. I've made three large 1.110 beers with no issues on 2 liter starters. Your mileage may very.

I've only been doing this since January, so what I say can be taken with a grain of salt.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Imperial Stout Fermentation Temp danielinva General Techniques 5 08-05-2009 08:41 PM
Imperial Stout. Stuck fermentation. SeldomSeen General Techniques 4 12-18-2008 11:06 PM
question about imperial stout fermentation 513hooligan All Grain & Partial Mash Brewing 5 09-25-2008 01:47 AM
Stout seems to be stuck in fermentation miatawnt2b General Techniques 4 10-06-2007 02:40 AM
Imperial stout stuck ferment barside laundry All Grain & Partial Mash Brewing 7 07-14-2006 01:41 PM

Forum Jump