Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Wee Heavy process questions
Reply
 
Thread Tools
Old 09-19-2009, 11:48 AM   #1
carl spakler
Registered User
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2008
Location: MA
Posts: 294
Liked 1 Times on 1 Posts

Default Wee Heavy process questions

I have all the ingredients for a Wee Heavy and am wondering if the following process would be worthwhile.

Using a PM technique:
Mash grains and take the "first runnings" into one pot and begin to boil/concentrate this down.
Sparge grains into a separate pot then add the concentrated wort to this pot for the remainder of the boil.

If so, when does the boil time for hop additions start?
How much should I boil the first runnings down prior to combining the two volumes?
Is this going to add anything to the beer or just make the process take longer?

Recipe (in case it matters):
5.5 lbs light DME
4 lbs MO
1 lb Crystal 60
.25 lbs roasted barley
.1 chocolate malt
1 oz Brambling Cross (6%AA)
1728 yeast


carl spakler is offline
 
Reply With Quote
Old 09-19-2009, 12:21 PM   #2
flyangler18
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2008
Location: Hanover, PA
Posts: 5,679
Liked 34 Times on 31 Posts
Likes Given: 5

Default

Kettle caramelization was the traditional technique for brewing Wee Heavy/Strong Scotch; I usually reduce the first runnings by half. Doing this adds rich caramel/toffee flavors to the mix and, in traditional formulations, replaces any crystal malts in the grist. Wonderful Wee Heavies can be made using nothing more than pale malt and roasted barley to adjust for color and the kettle caramelization.

Add your hops at 60 minutes as usual and the reduced first runnings when convenient to you.


flyangler18 is offline
 
Reply With Quote
Old 09-21-2009, 12:34 PM   #3
carl spakler
Registered User
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2008
Location: MA
Posts: 294
Liked 1 Times on 1 Posts

Default

Thanks for the advice. Brewed and fermenting away.
carl spakler is offline
 
Reply With Quote
Old 09-21-2009, 01:19 PM   #4
flyangler18
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2008
Location: Hanover, PA
Posts: 5,679
Liked 34 Times on 31 Posts
Likes Given: 5

Default

Certainly!

Just remember to keep this one cool during fermentation (I ferment at 58 for this strain) and lager after primary if you are set up to do so. You'll be rewarded with a malty and satisfying ale and a very clean yeast profile.
flyangler18 is offline
 
Reply With Quote
Old 09-21-2009, 04:17 PM   #5
carl spakler
Registered User
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2008
Location: MA
Posts: 294
Liked 1 Times on 1 Posts

Default

I have the fermenter at ~60*. The last time I used this yeast I was at ~55* and was happy with the results.


carl spakler is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Questions on Melomel Process KCWortHog Mead Forum 18 10-29-2009 03:48 PM
Best Wee Heavy Kit from AHB? gator_brewer General Beer Discussion 0 04-15-2009 03:37 PM
Having questions about the brewing-bottling process betacrash Beginners Beer Brewing Forum 8 02-11-2009 05:46 PM
Brewing Process questions aliu630 Beginners Beer Brewing Forum 6 11-19-2007 07:07 PM
Wee Heavy jettaman Recipes/Ingredients 9 12-03-2006 10:08 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS