Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Wine, Mead, Cider, Sake & Soda > Mead Forum > Mulberry Mead Recipe
Reply
 
Thread Tools
Old 09-16-2009, 05:09 PM   #1
knotquiteawake
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2009
Location: Dallas TX
Posts: 1,146
Liked 20 Times on 18 Posts
Likes Given: 19

Default Mulberry Mead Recipe

I traded some computer work for a sample of a staff member's mead at my old work and was really impressed. It smelled very alcoholic but tasted amazing! I asked him about it and he gave me this recipie from some "Tastes of Anglo-Saxon England" book. I'm wondering what you guys think about it, it says its good to drink in 1-2 months.

3/4 gallon water
1.5lbs Mulberries (or any other berry)
1 tablespoon sugar
1/2lb Raisins
1/4oz dry active/Wine yeast
1.5lbs of Honey
1 gallon glass jug
stopper

The directions summarized are to:
1. Crush fruit and cover in sugar and 6 cups of water and let sit overnight
2. strain fruit and get as much juice from it as possible, simmer juice for 3 min to sterilize
3. Boil Honey with remaining 6 cups of water for 20min.
4. Combine the juice and Honey and let cool
5. Add raisins and honey/juice to jar
6. Add yeast
7. after two weeks transfer to clean jug straining out the raisins
8. after another week rack to another clean jug being careful not to disturb the sediment.
9. Bottle in one or two months when it has stopped fermenting.

The guy said that after the 1-2 months its totally drinkable, from what i tasted I would agree.


knotquiteawake is offline
 
Reply With Quote
Old 09-17-2009, 02:41 PM   #2
wayneb
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: Evergreen, Colorado
Posts: 215
Liked 5 Times on 5 Posts

Default

Yup - that's a pretty basic melomel recipe, like the ones I used to make. It is fairly light in fermentable sugars (by my estimates, the starting specific gravity is around 1.070 or thereabouts), so it will make a fairly lightweight beverage, topping out at around 9% ABV. But the berry juice will add lots of flavor, and the addition of a little table sugar will cause the yeast to generate some fusels, which are probably responsible for the apparent alcohol edge that you tasted. The raisins will add some yeast nutrients, and will also add a touch of sherry-like flavor.

All in all, except for boiling the stuff (which I don't do any more, and I have not noticed an increased incidence of infections from skipping the boiling), it is a sound recipe. Lighter weight recipes such as this one are typically drinkable in the 2 to 4 month time frame.


wayneb is offline
 
Reply With Quote
Old 09-17-2009, 02:45 PM   #3
knotquiteawake
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2009
Location: Dallas TX
Posts: 1,146
Liked 20 Times on 18 Posts
Likes Given: 19

Default

great, sounds like I just need some jugs and stoppers and I'm good to go. I can find gallon glass jugs online but they are kind of pricey (plus shipping them since they are heavy). Any idea of any stores that might sell them or alternatives to using a couple glass jugs?
knotquiteawake is offline
 
Reply With Quote
Old 09-17-2009, 02:47 PM   #4
wayneb
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: Evergreen, Colorado
Posts: 215
Liked 5 Times on 5 Posts

Default

I've gotten all my glass gallon jugs free, since I buy a lot of locally produced fresh cider and at least until recent years, the juices always came in glass gallon containers.
wayneb is offline
 
Reply With Quote
Old 09-17-2009, 02:52 PM   #5
knotquiteawake
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2009
Location: Dallas TX
Posts: 1,146
Liked 20 Times on 18 Posts
Likes Given: 19

Default

two questions then.
What size stopper do most of those glass jugs come in?

For gallon batches how do you take gravity readings? with 5 gallons of beer I don't mind taking an entire beaker of beer out to test, but with only a gallon I wouldn't want to waste any of it.
knotquiteawake is offline
 
Reply With Quote
Old 09-17-2009, 03:20 PM   #6
wayneb
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: Evergreen, Colorado
Posts: 215
Liked 5 Times on 5 Posts

Default

Usually they take size #6-1/2 stoppers, but you can also get a #7 to fit some of them. Some of the newer ones will even fit a #6, although you're pretty close to getting the stopper to go all the way through the opening.

I wouldn't bother with more than an initial and a final gravity reading for this recipe. It is pretty foolproof, along the same lines as Joe's Ancient Orange (the supposedly bulletproof simple mead recipe that you can even make with bread yeast). In general I don't do anything too serious in gallon sizes any more, for that very reason - too much lost in the monitoring process. So these days I have empty gallons around only to catch the excess that I usually get since I ferment most of my "5 gallon" batches in primaries that start out in the 7 to 7.5 gallon range.
wayneb is offline
 
Reply With Quote
Old 10-13-2011, 01:46 PM   #7
Pith
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Location: Blue Mountains, NSW
Posts: 322
Liked 6 Times on 6 Posts
Likes Given: 1

Default

How would you do this recipe without crushing the fruit? I really like the look of the whole berries in a carboy. :3
Pith is offline
 
Reply With Quote
Old 10-13-2011, 02:43 PM   #8
wayneb
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: Evergreen, Colorado
Posts: 215
Liked 5 Times on 5 Posts

Default

Well, my short answer is that I wouldn't make it without at least a gentle crush of the fruit, because my objective is to get that great color and berry flavor into the mead. But if you enjoy watching whole berries (especially during the early part of primary fermentation when the yeast are really going to town on the sugars and producing lots of CO2, which mixes things up and pushes those berries up to the top of the fermenting vessel, forming a fruit cap), then I suppose you could put a few extra berries in there whole.
wayneb is offline
 
Reply With Quote
Old 10-13-2011, 10:24 PM   #9
Pith
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Location: Blue Mountains, NSW
Posts: 322
Liked 6 Times on 6 Posts
Likes Given: 1

Default

Quote:
Originally Posted by wayneb View Post
Well, my short answer is that I wouldn't make it without at least a gentle crush of the fruit, because my objective is to get that great color and berry flavor into the mead. But if you enjoy watching whole berries (especially during the early part of primary fermentation when the yeast are really going to town on the sugars and producing lots of CO2, which mixes things up and pushes those berries up to the top of the fermenting vessel, forming a fruit cap), then I suppose you could put a few extra berries in there whole.
Thanks. In reality though, if I make a pretty brew that means I'll want to watch it often, which will make me impatient and maybe make me try and hurry the thing up. The colour and taste is important to me, and even if it did happen with uncrushed berries, it'd take a helluva lot longer, which would not combine well with my impatience. Maybe I will blend/crush them.

Also, how would you feel about adding a portion to primary as well as secondary? What would be the pluses and minuses of having a higher proportion in either?
Pith is offline
 
Reply With Quote
Old 10-13-2011, 10:53 PM   #10
wayneb
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: Evergreen, Colorado
Posts: 215
Liked 5 Times on 5 Posts

Default

The end result of fruit in primary will be different than fruit in secondary. In primary, the vigorous yeast activity will change the characteristic of the fruit, in much the same way that fermented grapes don't taste the same as fresh grapes that have been soaked in a little alcohol. I prefer to use most to all of my fruit in primary, because I like the added flavor complexity that results. However there are lots of folks who prefer to add all their fruit in secondary, since that usually results in a much more "in your face" fruit presence in the resulting mead. The choice is yours, and you might consider trying two batches, one done one way and the second done the other. That way you can figure out what you personally prefer.


wayneb is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Looking for Mulberry Port recipe. BeerRunner Wine Making Forum 17 03-29-2010 04:23 AM
Mulberry Mead: The Dramatic Adventure will_cbe Mead Forum 8 05-13-2009 05:10 AM
My first mead, my own recipe FabilaJ Mead Forum 8 06-01-2008 01:39 AM
What to do with mulberry jezter6 Recipes/Ingredients 2 06-11-2007 02:18 PM
Mead Recipe?? JOHN51277 Mead Forum 5 12-14-2005 03:11 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS