Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > General Techniques > Trust Your Airlock
Closed Thread
 
Thread Tools
Old 08-31-2009, 05:52 PM   #11
Homercidal
Licensed Sensual Massage Therapist.
HBT_MODERATOR.png
Feedback Score: 0 reviews
 
Homercidal's Avatar
Recipes 
 
Join Date: Feb 2008
Location: Reed City, MI
Posts: 27,029
Liked 3494 Times on 2387 Posts
Likes Given: 2279

Default

I used to go by the airlock, until one time it didn't bubble and I very nearly pitched with an alternate yeast. I'm glad I didn't, because once I popped the lid to check with a hydro, I found the signs of fermentation. Somehow that lid didn't seal tight for the first time.

I very nearly pitched the wrong yeast as a backup (only yeast I had at the time). Now that I have more experience I know to check FG with the hydro, and for more than just to see if it's fermenting. It can tell me how much it fermented, and if it should be done (very closely)

I guess for some, the airlock is good enough. Not for me. Well, maybe in a carboy, but I mostly ferment in a bucket, where the chances of having a leak are much higher.


__________________
If your takin' your girlfriend out tonight
You better park the car well out of sight
'Cos if they catch you in the back seat trying to pick her locks
They're gonna send you back to mother in a cardboard box !
Homercidal is offline
 
Old 08-31-2009, 05:55 PM   #12
flyangler18
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2008
Location: Hanover, PA
Posts: 5,679
Liked 34 Times on 31 Posts
Likes Given: 5

Default

Quote:
The co2 will no escape through the airlock until all the deadspace is filled.
This is a factor that I didn't consider! Goodonya for noting it.

I'd have to think that an adequate pitch of yeast into a well-oxygenated wort will fill a headspace quite quickly, probably within hours. If one were fermenting a 3 gallon batch in a 6.5 gallon carboy, this would be more of a factor.


flyangler18 is offline
 
Old 08-31-2009, 06:04 PM   #13
arturo7
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
arturo7's Avatar
Recipes 
 
Join Date: Apr 2007
Location: Huntington Beach
Posts: 9,208
Liked 234 Times on 163 Posts
Likes Given: 1

Default

I thought this was the science forum?

Nothing here but anecdotal evidence.

Where is the science?
__________________
Hey, knock that shvt off. We're drinkin' here.
arturo7 is offline
 
Old 08-31-2009, 06:08 PM   #14
ThickHead
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2008
Location: Atlanta, GA
Posts: 1,010
Liked 45 Times on 30 Posts
Likes Given: 9

Default

Quote:
Originally Posted by arturo7 View Post
I thought this was the science forum?

Nothing here but anecdotal evidence.

Where is the science?
Observation is a "scientific" method. Particularly when combined with the application of some form of established metric (like that associated with a hydrometer).
ThickHead is offline
 
Old 08-31-2009, 06:25 PM   #15
AnOldUR
fer-men-TAY-shuhn
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
AnOldUR's Avatar
Recipes 
 
Join Date: Mar 2007
Location: New Jersey
Posts: 6,788
Liked 760 Times on 554 Posts
Likes Given: 610

Default

Quote:
Originally Posted by flyangler18 View Post
This is a factor that I didn't consider! Goodonya for noting it.
So what, you suck all the air out of your carboy after you put the lid on?

From the very start of fermentation CO2 will be displacing the existing air and pushing it out the airlock. If you don't have a leak you have bubbles right from the start.

And I'm not saying that airlock activity is the end all choice of determining your beers condition, but it is the primary tool. A very low tech, but potentially accurate tool.
__________________
Sent from my POS computer because I refuse to own a smartphone!
AnOldUR is offline
 
Old 08-31-2009, 06:31 PM   #16
Tonedef131
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2008
Location: Fort Wayne
Posts: 1,906
Liked 26 Times on 14 Posts
Likes Given: 3

Default

Quote:
Originally Posted by AnOldUR View Post
So what, you suck all the air out of your carboy after you put the lid on?

From the very start of fermentation CO2 will be displacing the existing air and pushing it out the airlock. If you don't have a leak you have bubbles right from the start.
The head space only has to be pressurized enough to push the hat on the airlock out, but the liquid does have to become saturated with CO2 before it starts to release it. This will depend on the temp of the solution, so the warmer it is the less saturation will occur before it releases gas. This is a pretty minimal amount and it doesn't take long for the saturation to occur, but there is CO2 being produced before it starts pushing out of the airlock.
Tonedef131 is offline
 
Old 08-31-2009, 06:32 PM   #17
Evan!
Feedback Score: 0 reviews
 
Evan!'s Avatar
Recipes 
 
Join Date: Aug 2006
Location: Charlottesville, VA
Posts: 11,901
Liked 76 Times on 65 Posts
Likes Given: 1

Default

Quote:
Originally Posted by AnOldUR View Post
So what, you suck all the air out of your carboy after you put the lid on? From the very start of fermentation CO2 will be displacing the existing air and pushing it out the airlock. If you don't have a leak you have bubbles right from the start.
That's what I was going to say. Somehow I doubt that people have a vacuum in their headspace prior to fermentation.

Quote:
And I'm not saying that airlock activity is the end all choice of determining your beers condition, but it is the primary tool. A very low tech, but potentially accurate tool.
IMHO, it's a crude visual indicator that helps determine when to take a hydrometer reading. I use glass and BB carboys, so I usually rely on watching the wort more than I do airlock activity. I usually only take 2 or 3 readings. I have a refractometer, so I don't need to take anything prior to it going into the fermenter. I take my first hydro reading just prior to pitching; my second one is taken when I feel the bulk of fermentation has subsided (when the sugars are consumed, and it's transitioning into the conditioning stage). This is done to make sure I hit my target FG...if it hasn't, then I will either heat it up and stir, or I'll pitch onto another cake. I might also take one just before I rack to the keg, to make sure it's where I want it to be.

But just like Revvy's blanket statement that your airlock is unreliable, this blanket statement that it IS, is not helpful.
__________________
MOSS HOLLOW BREWING CO.
Aristocratic Ales, Lascivious Lagers


.planned:
•Scottish 80/- •Sweet Stout •Roggenbier
.primary | bright:
98: Moss Hollow Soured '09 72: Oude Kriek 99: B-Weisse 102: Brett'd BDSA 104: Feat of Strength Helles Bock 105: Merkin Brown
.on tap | kegged:
XX: Moss Hollow Springs Sparkling Water 95: Gott Mit Uns German Pils 91b: Brown Willie's Oaked Abbey Ale 103: Merkin Stout
98: Yorkshire Special 100: Maple Porter 89: Cidre Saison 101: Steffiweizen '09 (#3)
Evan! is offline
 
Old 08-31-2009, 06:32 PM   #18
ThickHead
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2008
Location: Atlanta, GA
Posts: 1,010
Liked 45 Times on 30 Posts
Likes Given: 9

Default

Quote:
Originally Posted by AnOldUR View Post
...potentially accurate tool.
LOL...nice!

Trust your airlock, but trust your hydrometer more.
ThickHead is offline
 
Old 08-31-2009, 06:33 PM   #19
chumprock
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Location: Rochester, NY
Posts: 1,043
Liked 34 Times on 23 Posts
Likes Given: 6

Default

Call me a nerd, but I'll stick to Hydrometer readings.

The parameters that qualify your statement are loose at best and I dont think can be guaranteed with typical homebrewing equipment.
chumprock is offline
 
Old 08-31-2009, 06:43 PM   #20
flyangler18
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2008
Location: Hanover, PA
Posts: 5,679
Liked 34 Times on 31 Posts
Likes Given: 5

Default

Quote:
So what, you suck all the air out of your carboy after you put the lid on?

From the very start of fermentation CO2 will be displacing the existing air and pushing it out the airlock. If you don't have a leak you have bubbles right from the start.
This is why I don't do science.

I'll stick with my artsy fartsy humanities stuff, thanks!


flyangler18 is offline
 
Closed Thread


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Do you really trust using brass? ILOVEBEER General Beer Discussion 21 10-30-2009 04:40 PM
Do you trust Fermometer? andreiz General Beer Discussion 18 07-11-2009 03:35 AM
3 thermometers: which to trust nebben Equipment/Sanitation 2 06-07-2009 03:54 PM
I think I don't trust Windsor... Waboom!! Recipes/Ingredients 27 07-29-2008 05:47 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS