Spike Brewing Giveaway - New v3 Kettle

Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Hop mess up?
Reply
 
Thread Tools
Old 08-22-2009, 07:12 PM   #1
Blackhawkbrew
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2008
Location: Cleveland, Ohio
Posts: 481
Likes Given: 2

Default Hop mess up?

I'm sitting here waiting for my second AG patch to boil (boy, they're right, a watched pot never boils). I'm brewing a Mocktoberfest. I got all my ingredients ready this morning and noticed that I had 1 oz of tettnang hops, which the recipe calls for, and 1 oz of tradition hops! I got both bags out of the same bin at the HBS. I know this will change the beer, but how much?


Blackhawkbrew is offline
 
Reply With Quote
Old 08-22-2009, 08:08 PM   #2
Denny
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2005
Location: Eugene OR
Posts: 4,505
Liked 514 Times on 379 Posts
Likes Given: 667

Default

It won't change it much.


__________________
Life begins at 60....1.060, that is!

www.dennybrew.com

http://www.experimentalbrew.com - the website for the book "Experimental Homebrewing"...coming Nov. 2014
Denny is offline
 
Reply With Quote
Old 08-22-2009, 08:18 PM   #3
Blackhawkbrew
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2008
Location: Cleveland, Ohio
Posts: 481
Likes Given: 2

Default

Thanks Denny.

Now I had to change my propane tank and lost some boil time, about 15 minutes, it's still not up to a rolling boil yet. Should I just let it boil for 10 more minutes or take it off?
Blackhawkbrew is offline
 
Reply With Quote
Old 08-22-2009, 08:24 PM   #4
Orfy
For the love of beer!
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Orfy's Avatar
Recipes 
 
Join Date: Sep 2005
Location: Cheshire, England
Posts: 11,785
Liked 93 Times on 61 Posts
Likes Given: 30

Default

I'd boil to the required volume so you get the required ABV. The IBU may change a little bit but I doubt you'll notice it.

i.e increase the time.
__________________
GET THE GOBLIN
Have a beer on me.
Orfy is offline
 
Reply With Quote
Old 08-22-2009, 08:52 PM   #5
Blackhawkbrew
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2008
Location: Cleveland, Ohio
Posts: 481
Likes Given: 2

Default

I can't seem to get the GD pot to boil! I got the lid on it now for a bit. By the way, my pre-boil gravity reading is 1.045.
Blackhawkbrew is offline
 
Reply With Quote
Old 08-23-2009, 12:35 PM   #6
wilserbrewer
BIAB Expert Tailor
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 10 reviews
 
wilserbrewer's Avatar
Recipes 
 
Join Date: May 2007
Location: Jersey Shore, Jersey
Posts: 8,897
Liked 1105 Times on 860 Posts
Likes Given: 16

Default

Quote:
Originally Posted by Blackhawkbrew View Post
I can't seem to get the GD pot to boil! I got the lid on it now for a bit. .

Hah, this means to me you are minutes away from boilover.
wilserbrewer is offline
 
Reply With Quote
Old 08-23-2009, 02:09 PM   #7
Blackhawkbrew
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2008
Location: Cleveland, Ohio
Posts: 481
Likes Given: 2

Default

No, no boilover (or return to boil for that matter). I took off the flame with about 6 gallons left. My IC only brings the wort down to about 100 degrees (I'm thinking of using a prechiller, any suggestions?). I cooled it to about 85 and than began to aerate by pouring the wort from bucket to bucket. I got it down to about 79 degrees and pitched. The fermenter then went into a cooler of water with a towel and a couple of frozen water bottles. Checked it this morning and the airlock is bubbling

According to Brewsmith, my efficiency into the boiler was 77%, I'll take that for my 2nd AG!


Blackhawkbrew is offline
 
Reply With Quote
Reply

Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Well did i mess up? CanuckBrewing Beginners Beer Brewing Forum 1 02-10-2009 04:20 AM
What a mess Mutine Bullfrog General Beer Discussion 6 08-29-2007 07:47 PM
did I mess up? jeffm1000 Beginners Beer Brewing Forum 7 11-10-2006 11:29 PM


Forum Jump