Primary Regulator PSI for Multiple Kegs - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Primary Regulator PSI for Multiple Kegs

Reply
 
Thread Tools
Old 08-14-2009, 09:56 PM   #1
NoVa
Recipes 
 
Oct 2008
Posts: 26
Liked 1 Times on 1 Posts



I've been searching and I can't find a thread for answer to my question. I recently pieced together a 4 keg system with secondary regulators, but I'm not sure what PSI my primary regulator needs to be set at to adequately support all the kegs. Say 12+12+12+12= 48PSI for primary or do I need to do something differently?

Thanks


 
Reply With Quote
Old 08-14-2009, 09:59 PM   #2
Dr_Deathweed
 
Dr_Deathweed's Avatar
Recipes 
 
Jul 2007
Bryan, Texas
Posts: 2,381
Liked 46 Times on 40 Posts


If your regulators are hooked up in-line on the high pressure port, you shouldn't have to worry about what your first regulator is set too.

My $0.02, if some one knows more about these systems feel free to chime in.
__________________
"Never ascribe to malice that which can be adequately explained by incompetence." - Napoleon Bonaparte
“An intelligent man is sometimes forced to be drunk to spend time with his fools.” - Ernest Hemingway

Fermentation CabinetAdding Faucets to a TowerDIY HopbackPortable Kegerator

 
Reply With Quote
Old 08-14-2009, 11:59 PM   #3
bendavanza
 
bendavanza's Avatar
Recipes 
 
Aug 2008
Oak CLiff, TX
Posts: 2,218
Liked 19 Times on 17 Posts


You shouldn't need more than 12 at the primary if your secondaries are at 12, but since you probably have check valves and such which can create resistance, I'd set the primary higher than the highest secondary setting you will use. 20 psi should be fine. 48 would be fine, too.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Multiple taps with one regulator?? Reddog68 Bottling/Kegging 15 11-06-2008 06:33 PM
Re: Carbing Multiple Kegs FPM Bottling/Kegging 1 03-15-2008 05:58 PM
going from 1 keg to multiple kegs, what's needed balto charlie Bottling/Kegging 5 01-30-2008 02:58 PM
How do I run multiple cornies off of one regulator? NOVA Brewer Bottling/Kegging 8 01-03-2008 03:17 PM
Multiple Kegs with One CO2 sub1427 Bottling/Kegging 7 04-06-2006 05:00 PM


Forum Jump